Closes#27982
Release Notes:
- Added `close_on_file_delete` setting (off by default) to allow closing
open files after they have been deleted on disk
---------
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Release Notes:
- Debugger Beta: `shift-escape` (`workspace::ToggleZoom`) now zooms the
entire debug panel; `alt-shift-escape` (`debugger::ToggleExpandItem`)
triggers the old behavior of zooming a specific item.
Release Notes:
- Debugger Beta: if there is no stopped or running session, `f5` now
reruns the last session, or opens the new session modal if there is no
previously-run session.
Closes#27579
This PR fixes issue where keybinding wouldn’t work in a pane after
focusing it from dock using the `ActivatePaneInDirection` action in
certain cases.
https://github.com/user-attachments/assets/9ceca580-a63f-4807-acff-29b61819f424
Release Notes:
- Fixed the issue where keybinding wouldn’t work in a pane after
focusing it from dock using the `ActivatePaneInDirection` action in
certain cases.
The optimization to not move a tab being pinned (when the destination
index is the same as its index) in
https://github.com/zed-industries/zed/pull/31871 caused a regression, as
we were no longer calling `cx.notify()` indirectly through `move_item`.
Thanks for catching this, @smitbarmase.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/31870
Release Notes:
- Allowed opening 1 more item if `n` tabs are pinned, where `n` equals
`max_tabs` count.
- Fixed a bug where pinned tabs would eventually be closed out when
exceeding the `max_tabs` count.
- Fixed a bug where a tab could be lost when pinning a tab while at the
`max_tabs` count.
- Fixed a bug where pinning a tab when already at the `max_tabs` limit
could cause other tabs to be incorrectly closed.
This PR adds a comprehensive test that ensures that no item-closing
action will panic when no items are present. A test already existed
(`test_remove_active_empty `) that ensured `CloseActiveItem` didn't
panic, but the new test covers:
- `CloseActiveItem`
- `CloseInactiveItems`
- `CloseAllItems`
- `CloseCleanItems`
- `CloseItemsToTheRight`
- `CloseItemsToTheLeft`
I plan to do a bit more clean up in `pane.rs` and this feels like a good
thing to add before that.
Release Notes:
- N/A
Release Notes:
- Debugger Beta: added a button to the quick action bar to start a debug
session or spawn a task, depending on which of these actions was taken
most recently.
- Debugger Beta: incorporated the tasks modal into the new session modal
as an additional tab.
---------
Co-authored-by: Julia Ryan <juliaryan3.14@gmail.com>
Co-authored-by: Julia Ryan <p1n3appl3@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Mikayla <mikayla@zed.dev>
Follow-up to #31712
Pane handle hitboxes were opaque prior to the linked PR. This was the
case because pane handles have an intentionally larger hitbox than the
pane dividers size to allow for easier dragging. The cursor style is
also updated for that hitbox to indicate that resizing is possible:
https://github.com/zed-industries/zed/blob/908678403871e0ef18bbe20f78a84654dfdd431d/crates/workspace/src/pane_group.rs#L1297-L1301
Not blocking the mouse events here causes mouse events to bleed through
this hitbox whilst actually any clicks will only cause a pane resize to
happen. Hence, this hitbox should continue to block mouse events to
avoid any confusion when resizing panes.
I considered using `HitboxBehavior::BlockMouseExceptScroll` here,
however, due to the reasons mentioned above, I decided against it. The
cursor will not indicate that scrolling should be possible. Since all
other mouse events on underlying elements (like hovers) are blocked, it
felt more reasonable to just go with `HitboxBehavior::BlockMouse`.
Release Notes:
- N/A
tl;dr: This adds `.block_mouse_except_scroll()` which should typically
be used instead of `.occlude()` for cases when the mouse shouldn't
interact with elements drawn below an element. The rationale for
treating scroll events differently:
* Mouse move / click / styles / tooltips are for elements the user is
interacting with directly.
* Mouse scroll events are about finding the current outer scroll
container.
Most use of `occlude` should probably be switched to this, but I figured
I'd derisk this change by minimizing behavior changes to just the 3 uses
of `block_mouse_except_scroll`.
GPUI changes:
* Added `InteractiveElement::block_mouse_except_scroll()`, and removes
`stop_mouse_events_except_scroll()`
* Added `Hitbox::should_handle_scroll()` to be used when handling scroll
wheel events.
* `Window::insert_hitbox` now takes `HitboxBehavior` instead of
`occlude: bool`.
- `false` for that bool is now `HitboxBehavior::Normal`.
- `true` for that bool is now `HitboxBehavior::BlockMouse`.
- The new mode is `HitboxBehavior::BlockMouseExceptScroll`.
* Removes `Default` impl for `HitboxId` since applications should not
manually create `HitboxId(0)`.
Release Notes:
- N/A
Open inspector with `dev: toggle inspector` from command palette or
`cmd-alt-i` on mac or `ctrl-alt-i` on linux.
https://github.com/user-attachments/assets/54c43034-d40b-414e-ba9b-190bed2e6d2f
* Picking of elements via the mouse, with scroll wheel to inspect
occluded elements.
* Temporary manipulation of the selected element.
* Layout info and JSON-based style manipulation for `Div`.
* Navigation to code that constructed the element.
Big thanks to @as-cii and @maxdeviant for sorting out how to implement
the core of an inspector.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-authored-by: Federico Dionisi <code@fdionisi.me>
This affects python's when debugging because the selected toolchain is
used as the python binary to spawn Debugpy
Release Notes:
- Fix bug where selected toolchain didn't exist
In accordance with #30327, I saw no reason for included files to get
special treatment, and I actually get use out of prefilling excluded
files because I like not to search symlinked files which, in my
workflow, use a naming convention.
This is simply implementing the same exact changes, but for excluded. It
was tested with `"space /": ["pane::DeploySearch", { "excluded_files":
"**/_*.tf" }]` and works just fine.
Release Notes:
- Added `excluded_files` to `pane::DeploySearch`.
https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
Closes#30820
Release Notes:
- Fixed an issue where entering a new search in the project search would
drop unsaved edits in the project search buffer
---------
Co-authored-by: Mark Janssen <20283+praseodym@users.noreply.github.com>
Closes #ISSUE
Release Notes:
- Breaking change: The actions used while developing Zed have been
renamed from `debug:` to `dev:` to avoid confusion with the new debugger
feature:
- - `dev::OpenDebugAdapterLogs`
- - `dev::OpenSyntaxTreeView`
- - `dev::OpenThemePreview`
- - `dev::OpenLanguageServerLogs`
- - `dev::OpenKeyContextView`
Closes https://github.com/zed-industries/zed/issues/23386
This PR updates the scrollbar-component to account for padding present
in the parent container.
Since the linked issue was opened,
https://github.com/zed-industries/zed/pull/25288 improved the behaviour
so that the scrollbar does allow scrolling the entire container, however
the scrollbar thumb still does not go the entire way to the bottom. This
can be seen here:
https://github.com/user-attachments/assets/89204355-e6b8-428b-9fa9-bb614051b6fa
This happens because during layouting of the scrollbar, padding of the
parent container is not taken into account. The scrollbar thumb size is
calculated as if no padding was present.
With this change, padding is now included in the calculation, which
resolves the issue:
https://github.com/user-attachments/assets/1d4c62e0-4555-4332-a9ab-4e114684b4b3
The change here is to store the calculated content size during prepaint
_including_ padding and use this for layouting the scrollbar. This
ensures that the actual scroll max and the content size are always in
sync. Furthermore, the existing `TODO`-comment is also resolved, as we
now no longer look at the size of the last child but the actual parent
size instead.
This also removes an existing panic of the scrollbar-component in cases
where the content size was 0, which was previously not accounted for
(this never happened in practice so far, for example because of the
padding added here:
https://github.com/zed-industries/zed/blob/43712285bfa8aa75bac1ca8a7eb5146dd36239be/crates/editor/src/hover_popover.rs#L802-L809
which prevented the container size from ever being 0).
---
Lastly, as I was wiring through the changes of the `content_size` I
noticed that some code was duplicated during the initial layouting as
well as in the click handlers. I refactored this in the second commit to
use `along` where possible as well as computing the new click offset in
one closure which can be passed to both event listeners. As always,
should any of these changes not be wanted, feel free to let me know and
I will revert these.
Looking forward to your feedback 😄
Release Notes:
- Fixed scrollbars sometimes not scrolling all the way to the bottom.
Useful for large monorepos with many subdirectories, users can keybind a
filter to their commonly used directories.
Release Notes:
- Added a new `included_files` field to the `DeploySearch` action to
automatically pre-fill which files to include in the search. This lets
you use a keybinding to search in a particular folder or for a certain
set of files.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This is a more generic implementation of
https://github.com/zed-industries/zed/pull/30360
This also removes the need for a separate close action for the git
panel.
The downside is maybe it is harder to find since it is less specific.
Release Notes:
- workspace: Added new `workspace: close active dock` action to close
the currently focused dock
Follow-up of https://github.com/zed-industries/zed/pull/30015
* Restyles the dismiss and close buttons a bit: change the dismiss icon
and add tooltips with the bindings to both
* Allows ESC to clear any status that's in the activity indicator now,
if all notifications are cleared: this won't suppress any further status
additions though, so statuses may resurface later
Release Notes:
- Added a way to clear activity indicator
Closes#27173
Problem:
Active panes nested within axes were incorrectly receiving opacity
overlays, while inactive panes in nested structures would get multiple
overlays applied, making them appear darker than intended.
Solution:
I fixed this by distinguishing between leaf panes and axes in the
rendering pipeline, applying overlays only to elements that are both
leaf panes and not active, ensuring consistent visual treatment
regardless of their position in the hierarchy.
Release Notes:
- Fixed an issue where `inactive_opacity` settings would be applied to
panes multiple times and even to the active pane when nested within
another pane.
