Noticed this whilst testing the Docker debugger. I randomly scrolled the
console off screen and was confused briefly as to why this was the case.
Release Notes:
- The debugger query console will no longer needlessly overscroll.
This PR fixes breakpoint icon alignment to also be at the end of a
rendered entry and enables editing breakpoint qualities when there's no
active session.
The alignment issue was caused by some icons being invisible, so the
layout phase always accounted for the space they would take up. Only
laying out the icons when they are visible fixed the issue.
#### Before
<img width="1014" height="316" alt="image"
src="https://github.com/user-attachments/assets/9a9ced06-e219-4d9d-8793-6bdfdaca48e8"
/>
#### After
[
<img width="502" height="167" alt="Screenshot 2025-10-30 at 3 21 17 PM"
src="https://github.com/user-attachments/assets/23744868-e354-461c-a940-9b6812e1bcf4"
/>
](url)
Release Notes:
- Breakpoint list: Allow adding conditions, logs, and hit conditions to
breakpoints when there's no active session
Closes#40360
This PR added heuristics to determine what variable/breakpoint list
entry has the longest width when rendered. I added this in so the
uniform list would correctly determine which item has the longest width
and use that to calculate the scrollbar size.
The heuristic can be off if a non-mono space font is used in the UI; in
most cases, it's more than accurate enough though.
Release Notes:
- debugger: Add horizontal scroll bars to variable list, memory view,
and breakpoint list
---------
Co-authored-by: MrSubidubi <dev@bahn.sh>
Closes#39172
This refactors when we resolve UI keybindings in an effort to reduce
flickering whilst painting these: Previously, we would always resolve
these upon creating the binding. This could lead to cases where the
corresponding context was not yet available and no binding could be
resolved, even if the binding was then available on the next presented
frame. Following that, on the next rerender of whatever requested this
keybinding, the keybind for that context would then be found, we would
render that and then also win a layout shift in that process, as we went
from nothing rendered to something rendered between these frames.
With these changes, this now happens less often, because we only look
for the keybinding once the context can actually be resolved in the
window.
| Before | After |
| --- | --- |
|
https://github.com/user-attachments/assets/adebf8ac-217d-4c7f-ae5a-bab3aa0b0ee8
|
https://github.com/user-attachments/assets/70a82b4b-488f-4a9f-94d7-b6d0a49aada9
|
Also reduced cloning in the keymap editor in this process, since that
requiered changing due to this anyway.
Release Notes:
- Fixed some cases where keybinds would appear with a slight delay,
causing a flicker in the process
Closes#39901
I'm unsure as to which direction the team wants to go with this, but
this is the behavior of VSCode which is what this feature is based off
so i'm going with this.
Changes:
1. Introduced a new argument to the `new` method on the Pane called
`ignore_max_tabs` that forces the `max_tabs` to None if it's true.
2. Added a new test `test_bypass_max_tabs_limit`.
Release Notes:
- Fixed: `max_tabs` Setting affecting the terminal pane.
---------
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
Re-applies https://github.com/zed-industries/zed/pull/30840
This PR re-applies the initial
[PR](https://github.com/zed-industries/zed/pull/30840). As it was closed
because it was hard to land, because of the many conflicts. This PR
re-applies the changes for it.
In several cases we were creating multiple display_map
snapshots within the same root-level function call.
Creating a display_map snapshot is quite slow, and in some
cases we were creating the snapshot multiple times.
Release Notes:
- N/A
Closes#39614
The `ShellKind` struct is built on Windows' side, meaning that when
connecting to remotes, we fall back to PowerShell construction, even if
the shell program we are spawning is a unix program.
This broke tasks creation since we are using the shell kind to construct
args:
https://github.com/zed-industries/zed/blob/d04ac864b8cb78ee888ce03323e34c17a6dd16b9/crates/project/src/terminals.rs#L149
In normal terminals this only affected activation scripts (only place
where shell kind is used)
I don't have a Windows machine to test it, so I would appreciate any
help with testing!
Release Notes:
- Fixed an issue where tasks could not be executed in Windows WSL
---------
Signed-off-by: Marco Mihai Condrache <52580954+marcocondrache@users.noreply.github.com>
This only affects `codex-acp` for now.
Not using the PTY in display-only terminals means they don't display the
login prompt (or spurious `%`s) at the end of terminal output
renderings.
Release Notes:
- N/A
Closes#5355
Release Notes:
- Fixed rendering glitches with files with more than 16 million lines
(that occured due to floating number rounding errors).
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Closes https://github.com/zed-industries/zed/issues/38690Closes#37353
### Background
On Windows, paths are normally separated by `\`, unlike mac and linux
where they are separated by `/`. When editing code in a project that
uses a different path style than your local system (e.g. remoting from
Windows to Linux, using WSL, and collaboration between windows and unix
users), the correct separator for a path may differ from the "native"
separator.
Previously, to work around this, Zed converted paths' separators in
numerous places. This was applied to both absolute and relative paths,
leading to incorrect conversions in some cases.
### Solution
Many code paths in Zed use paths that are *relative* to either a
worktree root or a git repository. This PR introduces a dedicated type
for these paths called `RelPath`, which stores the path in the same way
regardless of host platform, and offers `Path`-like manipulation APIs.
RelPath supports *displaying* the path using either separator, so that
we can display paths in a style that is determined at runtime based on
the current project.
The representation of absolute paths is left untouched, for now.
Absolute paths are different from relative paths because (except in
contexts where we know that the path refers to the local filesystem)
they should generally be treated as opaque strings. Currently we use a
mix of types for these paths (std::path::Path, String, SanitizedPath).
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
Add tests on task commands, to ensure things like
https://github.com/zed-industries/zed/issues/38343 do not come so easily
unnoticed and to provide a base to create more tests in the future, if
needed.
Release Notes:
- N/A
---------
Co-authored-by: Lukas Wirth <lukas@zed.dev>
Closes https://github.com/zed-industries/zed/issues/37621
Improves https://github.com/zed-industries/zed/issues/24623
Adding scrollbars withing Zed's UI currently is rather cumbersome, as it
requires the copying of a lot of code in order for these to work. Wiring
up settings for scrollbar visibilty always has to be done at the call
site and the state has to be saved and maintained by the caller as well.
Similarly, reserving space has to also be handled by the caller.
This PR changes the way scrollbars work in Zed fundamentally by making
use of the new `use_keyed_state` APIs: Instead of saving the state at
the call site, the window now keeps track of the state corresponding to
scrollbars. This enables us to add scrollbars with e.g. one simple call
on divs:
```rust
div()
.vertical_scrollbar(window, cx)
```
will add a scrollbar to the corresponding container. There are some more
improvements regarding tracking of scrollbar visibility settings (which
is now handled by a trait for each setting that supports this) as well
as reserving space.
Additionally, all needed stuff for layouting, catching events and
reserving space is also now managed by the scrollbar component instead.
This drastically reduces the amount of event listeners and makes
layouting of two scrollbars easier.
Furthermore, this paves the way for more improvements to scrollbars,
such as graceful auto-hide. Only downsight here is that we lose some
customizability in a few areas. However, once this lands, we gain the
ability to quickly follow these up without breaking stuff elsewhere.
This also already fixes a few bugs:
- Scrollbars no longer flicker on first render.
- Auto-hide now properly works for all scrollbars.
- If the content size changes, the scrollbar is updated on the same
frame. Both of these happened because we were computing the scrollbar
sizes too early, causing us to use the sizes from the previous frame or
unitialized sizes.
- The project panel no longer jumps if scrolled all the way to the
bottom and the scrollbar actually auto-hides.
Still TODO:
- [x] Fix scrolling in the debugger memory view
- [x] Clean up some more in the scrollbar component and reduce clones
there
- [x] Ensure we don't over-notify the entity the scrollbar is rendered
within
- [x] Make sure auto-hide properly works for all cases
- [x] Check whether we want to implement the scrollbar trait for
`UniformList`s as well
- ~~ [ ] Use for uniformlist where possible~~ Postponed
- [x] Improve layout for cases where we render both scrollbars.
Release Notes:
- N/A
The crash was caused by not accounting for the fact that a range of
collapse frames only counts as one entry. Causing the filter indices to
overshoot for indices after collapse frames (it was counting all
collapse frames instead of just one).
The test missed this because it all happened in one `cx.update` closure
and didn't render the stack frame list when the filter was applied. The
test has been updated to account for this.
Release Notes:
- N/A
Co-authored-by: Cole Miller <cole@zed.dev>
This PR cleans up some emitted events around the codebase. These events
are either never emitted or never listened for.
It seems better to re-implement these at some point should they again be
needed - this ensures that they will actually be fired in the cases
where they are needed as opposed to being there and getting unreliable
and stale (which is already the case for the majority of the events
removed here).
Lastly, this ensures the `CapabilitiesChanged` event is not fired too
often.
Release Notes:
- N/A
Follow up to https://github.com/zed-industries/zed/pull/30598
This PR introduces the `display_options` field in the
`CompletionResponse`, allowing a code context menu width to be
dynamically dictated based on its larger item. This will allow us to
have the @-mentions and slash commands completion menus in the agent
panel not be bigger than it needs to be. It may also be relevant/useful
in the future for other use cases.
For now, we set all instances of code context menus to use a fixed
width, as defined in the PR linked above, which means this PR shouldn't
cause any visual change.
Release Notes:
- N/A
Co-authored-by: Michael Sloan <mgsloan+github@gmail.com>
Instead of manually constructing the venv we now ask the python
toolchain for the relevant information, unifying the approach of vent
inspection
Fixes https://github.com/zed-industries/zed/issues/27350
Release Notes:
- Improved the detection of python virtual environments for terminals
and tasks in remote projects.
This PR adds a toggleable filter to the stack frame list that filters
out entries that don't exist within a user's project (visible work
trees). This works by keeping a vector of entry indices that exist
within a user's project and updates the list state based on these
entries when filtering the list.
I went with this approach so the stack frame list wouldn't have to
rebuild itself whenever the filter is toggled and it could persist its
state across toggles (uncollapsing a collapse list). It was also easier
to keep track of selected entries on toggle using the vector as well.
### Preview
https://github.com/user-attachments/assets/d86c7485-c885-4bbb-bebb-2f6385674925
Release Notes:
- debugger: Add option to only show stack frames from user's project in
stack frame list
This is a pure refactor that consolidates all SSH remoting logic such
that it should be straightforward to add another transport to the
remoting system.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This removes around 900 unnecessary clones, ranging from cloning a few
ints all the way to large data structures and images.
A lot of these were fixed using `cargo clippy --fix --workspace
--all-targets`, however it often breaks other lints and needs to be run
again. This was then followed up with some manual fixing.
I understand this is a large diff, but all the changes are pretty
trivial. Rust is doing some heavy lifting here for us. Once I get it up
to speed with main, I'd appreciate this getting merged rather sooner
than later.
Release Notes:
- N/A
Took a little bit of time to add just a handful of small tweaks to the
debugger UI so it looks slightly more polished. This PR includes
adjustments to size, focus styles, and more in icon buttons, overall
spacing nudges in each section pane, making tooltip labels title case
(for overall consistency), and some icon SVG iteration.
Release Notes:
- N/A
It's unfortunate to need to have access to a GPUI window in order to
create a terminal, because it forces to take a `Window` parameter in
entities that otherwise would have been pure models.
This pull request changes it so that we pass the `Project`'s entity id,
which is equally stable as the window id.
Release Notes:
- N/A
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
I also removed a debug assertion that wasn't true when a debug session
was restarting through a request, because there wasn't a booting task
Zed needed to run before the session.
I renamed SessionState::Building to SessionState::Booting as well,
because building implies that we're building code while booting the
session covers more cases and is more accurate.
Release Notes:
- debugger: Filter out more invalid debug configurations from the debug
picker
Co-authored-by: Remco Smits <djsmits12@gmail.com>
This also adds a convenient `Scrollbar:auto_hide` function so that we
don't have to handle that at the callsite.
Release Notes:
- N/A
---------
Co-authored-by: David Kleingeld <davidsk@zed.dev>
Follow up to: https://github.com/zed-industries/zed/pull/35670,
simplifies the List state APIs so you no longer have to worry about
strong vs. weak pointers when rendering list items.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <agus@zed.dev>
This is mostly setting up the UI for now; I expect it to be the biggest
chunk of work.
Release Notes:
- debugger: Added memory view
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This solves problems where users couldn't shut down sessions while
locators or build tasks are running.
I renamed `debugger::Session::Mode` enum to `SessionState` to be more
clear when it's referenced in other crates. I also embedded the boot
task that is created in `SessionState::Building` variant. This allows
sessions to shut down all created threads in their boot process in a
clean and idiomatic way.
Finally, I added a method on terminal that allows killing the active
task.
Release Notes:
- Debugger: Allow shutting down debug sessions while they're booting up
Follow-up #33868
This PR fixes a few issues with determining the completion range for
client‑ and variable‑list completions.
1. Non‑word completions
We previously supported only word characters and _, using their combined
length to compute the start offset. In PHP, however, an expression can
contain `$`, `-`, `>`, `[`, `]`, `(`, and `)`. Because these characters
weren’t treated as word characters, the start offset stopped at them,
even when the preceding character was part of a word.
2. Trailing characters inside the search text
When autocompletion occurred in the middle of the search text, we didn’t
account for trailing characters. As a result, the start offset was off
by the number of characters after the cursor. For example, replacing res
with result in print(res) produced `print(rresult)` because the trailing
`)` wasn’t subtracted from the start offset.
The following completions are correctly covered now:
- **Before** `$aut` -> `$aut$author` **After** `$aut` -> `$author`
- **Before** `$author->na` -> `$author->na$author->name` **After**
`$author->na` -> `$author->name`
- **Before** `$author->books[` -> `$author->books[$author->books[0]`
**After** `$author->books[` -> `$author->books[0]`
- **Before** `print(res)` -> `print(rresult)` **After** `print(res)` ->
`print(result)`
**Before**
https://github.com/user-attachments/assets/b530cf31-8d4d-45e6-9650-18574f14314chttps://github.com/user-attachments/assets/52475b7b-2bf2-4749-98ec-0dc933fcc364
**After**
https://github.com/user-attachments/assets/c065701b-31c9-4e0a-b584-d1daffe3a38chttps://github.com/user-attachments/assets/455ebb3e-632e-4a57-aea8-d214d2992c06
Release Notes:
- Debugger: Fixed autocompletion not always replacing the correct search
text
Closes#34323Closes#34313
The previous PR #33932 introduced a way to "close" the
`pending_requests` buffer of the `TransportDelegate`, preventing any
more requests from being added. This prevents pending requests from
accumulating without ever being drained during the shutdown sequence;
without it, some of our tests hang at this point (due to using a
single-threaded executor).
The bug occurred because we were closing `pending_requests` whenever we
detected the server side of the transport shut down, and this closed
state stuck around and interfered with the retry logic for SSH+TCP
adapter connections.
This PR fixes the bug by only closing `pending_requests` on session
shutdown, and adds a regression test covering the SSH retry logic.
Release Notes:
- debugger: Fixed a bug causing SSH connections to some adapters
(Python, Go, JavaScript) to fail and restart endlessly.
Finn Evers