* stopped fetching LSP tasks for too long (but still use the hardcoded
value for the time being — the LSP tasks settings part is a simple bool
key and it's not very simple to fit in another value there)
* introduced `prefer_lsp` language task settings value, to control
whether in the gutter/modal/both/none LSP tasks are shown exclusively,
if possible
Release Notes:
- Added a way to prefer LSP tasks over Zed tasks
Related to #31460 and #28635.
Release Notes:
- Fixed redraw delay of documentation from language server completions
and added caching to reduce flicker when using arrow keys to change
selection.
Previously disabled both scrollbars, but horizontal scrolling is still
needed when
lines exceed the viewport width. Now editors can disable a single scroll
axis, not just both.
Release Notes:
- N/A
Closes#31460
While this is now much better than it was, the documentation still
flickers when changing selection. Hoping to fix that, but it will be a
much more involved change. So leaving release notes as "N/A" for now, in
anticipation of the full fix.
Release Notes:
- N/A
Thanks @mgsloan for introducing `stop_mouse_events_except_scroll` which
is exactly what we want here!
Release Notes:
- Fixed being unable to scroll editors when the cursor is positioned on
diff hunk controls.
(Late) Follow-up to
https://github.com/zed-industries/zed/pull/26893#discussion_r2073427393
The mentioned issue of needed zero-division for scrollbars is now fixed
via #30189.
However, whilst the linked PR fixed the issue for the layouting of the
scrollbar thumb, I sadly did not address the (somewhat rare) case of
`document_lines == visible_editor_lines` within the calculation of the
minimap top offset.
This PR adds coverage for that case and ensures that the
`minimap_top_offset` never ends up being `NaN`.
Release Notes:
- N/A
This PR contains some small improvements for the language server log
editors. Due to the large gutter as well as the introduction of the
minimap, the horizontally available space was rather small. As these
editors soft wrap at the editor width, it resulted in the logs becoming
vertically larger and somewhat harder to read.
The improvement here is to disable all elements in the gutter that will
never appear or be used in the logs anyway. Furthermore, I opted to
disable the minimap altogether, since from my point of view it did not
contain any valuable information about the logs being shown.
First image is the current main, second is this branch. I put these
below each other so the difference is easier to spot.
Release Notes:
- N/A
Fixes#14612
This was a feature I dearly missed from VSCode, so adding this helped me
migrate to Zed without disrupting my workflow. I found that `4.0` was a
nice goldilocks multiplier and felt close/the same as the speed in
VSCode.
Release Notes:
- Added faster scrolling in the editor while holding opt/alt
A user on Discord reported an issue where the minimap thumb was fully
opaque:
<img
src="https://github.com/user-attachments/assets/5049c6a3-f89a-4ceb-9d1b-ec06e7fe9151"
height="300">
This can happen because the scrollbar and its thumb might not
neccessarily be transparent at all.
Thus, this PR adds the`minimap.thumb.background` and
`minimap.thumb.border` colors to themes so theme authors can specify
custom colors for both here.
Furthermore, I ensured that the minimap thumb background fallback value
can never be entirely opaque. The values were arbitrarily chosen to
avoid the issue from occuring whilst keeping currently working setups
working. With the new properties added, authors (and users) should be
able to avoid running into this issue altogether so I would argue for
this special casing to be fine. However, open to change it should a
different approach be preferrred.
Release Notes:
- Added `minimap.thumb.background` and `minimap.thumb.border` to themes
to customize the thumb color and background of the minimap.
- Fixed an issue where the minimap thumb could be opaque if the theme
did not specify a color for the thumb.
Editing JSON styles is not very helpful for bringing style changes back
to the actual code. This PR adds a buffer that pretends to be Rust,
applying any style attribute identifiers it finds. Also supports
completions with display of documentation. The effect of the currently
selected completion is previewed. Warning diagnostics appear on any
unrecognized identifier.
https://github.com/user-attachments/assets/af39ff0a-26a5-4835-a052-d8f642b2080c
Adds a `#[derive_inspector_reflection]` macro which allows these methods
to be enumerated and called by their name. The macro code changes were
95% generated by Zed Agent + Opus 4.
Release Notes:
* Added an element inspector for development. On debug builds,
`dev::ToggleInspector` will open a pane allowing inspecting of element
info and modifying styles.
Follow up to https://github.com/zed-industries/zed/pull/30140 and
https://github.com/zed-industries/zed/pull/31236
This PR introduces an inline code action indicator that shows up at the
start of a buffer line when there's enough space. If space is tight, it
adjusts to lines above or below instead. It also adjusts when cursor is
near indicator.
The indicator won't appear if there's no space within about 8 rows in
either direction, and it also stays hidden for folded ranges. It also
won't show up in case there is not space in multi buffer excerpt. These
cases account for very little because practically all languages do have
indents.
https://github.com/user-attachments/assets/1363ee8a-3178-4665-89a7-c86c733f2885
This PR also sets the existing `toolbar.code_actions` setting to `false`
in favor of this.
Release Notes:
- Added code action indicator which shows up inline at the start of the
row. This can be disabled by setting `inline_code_actions` to `false`.
Don't hard wrap interactively; instead, soft wrap in `Bounded` mode
(editor width or 72 chars, whichever is smaller), and then hard wrap
before sending the commit message to git.
This also makes the soft wrap mode and width for commit messages
configurable in language settings.
Previously we didn't support soft wrap modes other than `EditorWidth` in
auto-height editors; I tried to add support for this by analogy with
code that was already there, and it seems to work pretty well.
Closes#27508
Release Notes:
- Fixed confusing wrapping behavior in commit message editors.
Follow-up to #30138
In the linked PR, I enabled the content offset for all editors by
default. However, this introduced a small regression: There are some
editors where we do not want the text to be offset, most notably the
rename and the filename editor.
This PR adds a method to disable the content offset for specific
editors. I specifically decided on an opt-out approach, since I think
that having the small offset for most editors is actually a benefit
instead of a disadvantage. However, open to change that or to disable
the offset for all editors but full mode editors by default if that
should be preferred.
| `main` | This PR |
| --- | --- |
|
|
|
Release Notes:
- N/A
Follow-up to #29625 and #30902
This PR reintroduces auto-intents for brackets in Python and fixes some
cases where an indentation would be triggered if it should not. For
example, upon typing
```python
a = []
```
and inserting a newline after, the next line would be indented although
it shoud not be.
Bracket auto-indentation was tested prior to #29625 but removed there
and the test updated accordingly. #30902 reintroduced this for all
brackets but `()`. I reintroduced this here, reverted the changes to the
test so that indents also happen after typing `()`. This is frequently
used for tuples and multiline statements in Python.
Release Notes:
- Improved auto-indentation when using round brackets in Python.
Follow-up to #30316
This PR adds the `editor: toggle diagnostics` action to the comand
palette so that it can also be invoked that way.
I also ensures this, the `toggle inline diagnostics` and `toggle
minimap` actions are only registered if these are supported by the
current editor instance.
Release Notes:
- N/A
Closes#30756Closes#30729
Follow-up to #28064
The issue arose because GPUI does still propagate mouse events to all
event handlers during dragging actions even if the dragging action does
not belong to the current handler. I forgot about this in the other PR.
This resulted in an incorrect hover being registered for the thumb,
which was sufficient to trigger scrolling in the next frame, since
`dragging_scrollbar_axis` did not consider the actual thumb state (this
was generally sufficient, but not with this incorrectly registered
hover).
Theoretically, either of the both commits would suffice for fixing the
issue. However, I think it is better to fix both issues at hand instead
of just one. Now, we will only start the scroll on actual scrollbar
clicks and not show a hover on the thumb if any other drag is currently
going on.
https://github.com/user-attachments/assets/6634ffa0-78fc-428f-99b2-7bc23a320676
Release Notes:
- Fixed an issue where editor scrollbars would start scrolling when
hovering over the thumb whilst already dragging something else.
Open inspector with `dev: toggle inspector` from command palette or
`cmd-alt-i` on mac or `ctrl-alt-i` on linux.
https://github.com/user-attachments/assets/54c43034-d40b-414e-ba9b-190bed2e6d2f
* Picking of elements via the mouse, with scroll wheel to inspect
occluded elements.
* Temporary manipulation of the selected element.
* Layout info and JSON-based style manipulation for `Div`.
* Navigation to code that constructed the element.
Big thanks to @as-cii and @maxdeviant for sorting out how to implement
the core of an inspector.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-authored-by: Federico Dionisi <code@fdionisi.me>
Closes#31138
Fix edge case where adding newline if there is text afterwards end
delimiter of multiline comment, would continue the comment prefix. This
is fixed by checking for end delimiter on whole line instead of just
assuming it would always be at end.
- [x] Tests
Release Notes:
- Fixed the issue where in some cases the block comment continues to the
next line even though the comment block is already closed.
This includes the following data:
- Where we spawned the session from (gutter, scenario list, custom form
filled by the user)
- Which debug adapter was used
- Which dock the debugger is in
Closes #ISSUE
Release Notes:
- debugger: Added telemetry for new session experience that includes
data about:
- How a session was spawned (gutter, scenario list or custom form)
- Which debug adapter was used
- Which dock the debugger is in
---------
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
- Remove the modules list and loaded sources list from the default
layout
- Move the console to the center pane so it's visible initially
Release Notes:
- Debugger Beta: changed the default layout of the debugger panel,
hiding the modules list and loaded sources list by default and making
the console more prominent.
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
- Add missing handler for `debugger::Continue` so `f5` works
- Add bindings based on VS Code for `debugger::Restart` and
`debug_panel::ToggleFocus`
- Remove breakpoint-related buttons from the debug panel's top strip,
and surface the bindings for `editor::ToggleBreakpoint` in gutter
tooltip instead
Release Notes:
- Debugger Beta: Added keybindings for `debugger::Continue`,
`debugger::Restart`, and `debug_panel::ToggleFocus`.
- Debugger Beta: Removed breakpoint-related buttons from the top of the
debug panel.
- Compatibility note: on Linux, `ctrl-shift-d` is now bound to
`debug_panel::ToggleFocus` by default, instead of
`editor::DuplicateLineDown`.
Closes#31115
This fixes regression caused by
https://github.com/zed-industries/zed/pull/30824 while keeping that fix.
- [x] Test
Release Notes:
- Fixed the issue where adding a newline after the `///` comment would
extend it with `//` instead of `///` in Rust and other similar
languages.
Closes#5255, #1046, #28322, #15728
This PR makes `AddSelectionBelow` and `AddSelectionAbove` not skip lines
that are shorter than the current cursor column. This follows the same
behavior as VSCode and Sublime.
This change is only applicable in the case of an empty selection; if
there is a non-empty selection, it continues to skip empty and shorter
lines to create a Vim-like column selection, which is the better default
for that case.
- [x] Tests
The empty selection no longer skips shorter lines:
https://github.com/user-attachments/assets/4bde2357-20b6-44f2-a9d9-b595c12d3939
Non-empty selection continues to skip shorter lines.
https://github.com/user-attachments/assets/4cd47c9f-b698-40fc-ad50-f2bf64f5519b
Release Notes:
- Improved `AddSelectionBelow` and `AddSelectionAbove` to no longer skip
shorter lines when the selection is empty, aligning with VSCode and
Sublime behavior.
This PR changes it so we only create a snapshot and get the syntax tree
for a buffer if we didn't detect that auto_close is enabled.
<img width="1205" alt="Screenshot 2025-05-16 at 21 10 28"
src="https://github.com/user-attachments/assets/1ada445f-77bc-4c7c-bffe-953f34ee5384"
/>
Release Notes:
- Improved project search performance
https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
This PR hides hover info/diagnostic popovers when code action menu is
shown. We already hide hover info/diagnostic popover on code completion
menu trigger (handled on input).
Note: It is still possible to see hover popover if code completion or
code action menu is already open. This is intended behavior.
- [x] Test hover popover hides when code action is triggered
Release Notes:
- Fixed issue where info and diagnostic hover popovers were still
visible when code action menu is triggered.
This PR fixes a bug where comments don't extend when cursor is right
next to the second slash. We added `// ` as a prefix character to
correctly position the cursor after a new line, but this broke comment
validation by including that trailing space, which it shouldn't.
Now both line comments and block comments (already handled in JSDoc PR)
can extend right after the prefix without needing an additional space.
Before:
https://github.com/user-attachments/assets/ca4d4c1b-b9b9-4f1b-b47a-56ae35776f41
After:
https://github.com/user-attachments/assets/b3408e1e-3efe-4787-ba68-d33cd2ea8563
Release Notes:
- Fixed issue where comments weren't extending when adding new line
immediately after comment prefix (`//`).
Follow up for https://github.com/zed-industries/zed/pull/30768
This PR makes JSDoc auto comment on new line lot better by:
- Inserting delimiters regardless of whether previous delimiters have
trailing spaces or not
- When on start tag, auto-indenting both prefix and end tag upon new
line
This makes it correct as per convention out of the box. No need to
manually adjust spaces on every new line.
https://github.com/user-attachments/assets/81b8e05a-fe8a-4459-9e90-c8a3d70a51a2
Release Notes:
- Improved JSDoc auto-commenting on newline which now correctly indents
as per convention.
