Just like with diagnostics, adding a configurable padding to inline
blame
Release Notes:
- Added configurable padding to inline blame
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Diagnostics updates were programmed in Zed based off the r-a LSP push
diagnostics, with all related updates happening per file.
https://github.com/zed-industries/zed/pull/19230 and especially
https://github.com/zed-industries/zed/pull/32269 brought in pull
diagnostics that could produce results for thousands files
simultaneously.
It was noted and addressed on the local side in
https://github.com/zed-industries/zed/pull/34022 but the remote side was
still not adjusted properly.
This PR
* removes redundant diagnostics pull updates on remote clients, as
buffer diagnostics are updated via buffer sync operations separately
* batches all diagnostics-related updates and proto messages, so
multiple diagnostic summaries (per file) could be sent at once,
specifically, 1 (potentially large) diagnostics summary update instead
of N*10^3 small ones.
Buffer updates are still sent per buffer and not updated, as happening
separately and not offending the collab traffic that much.
Release Notes:
- Improved diagnostics performance in the collaborative mode
* Straightens out the `*_ext.rs` workflow for clangd and rust-analyzer:
no need to asynchronously query for the language server, as we sync that
information already.
* Fixes inlay hints editor menu toggle not being shown in the remote
sessions
Release Notes:
- Fixed inlay hints editor menu toggle not being shown in the remote
sessions
Before, each time any LSP feature was used on client remote, it always
produced a `proto::` request that always had been sent to the host, from
where returned as an empty response.
Instead, propagate more language server-related data to the client,
`lsp::ServerCapability`, so Zed client can omit certain requests if
those are not supported.
On top of that, rework the approach Zed uses to query for the data
refreshes: before, editors tried to fetch the data when the server start
was reported (locally and remotely).
Now, a later event is selected: on each `textDocument/didOpen` for the
buffer contained in this editor, we will query for new LSP data, reusing
the cache if needed.
Before, servers could reject unregistered files' LSP queries, or process
them slowly when starting up.
Now, such refreshes are happening later and should be cached.
This requires a collab DB change, to restore server data on rejoin.
Release Notes:
- Fixed excessive LSP requests sent during remote sessions
Add more logging to collab in order to help diagnose throughput issues.
IMPORTANT: Do not deploy this PR without pinging me.
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This pull request should be idempotent, but lays the groundwork for
avoiding to connect to collab in order to interact with AI features
provided by Zed.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
This PR reworks authentication for developing Zed against a local
version of Cloud and/or Collab.
You will still connect the same way—using the `zed-local` script—but
will need to be running an instance of Cloud locally.
Release Notes:
- N/A
This PR polishes and adds functionality to the onboarding UI with a
focus on the basic page. It added theme preview tiles, got the Vim,
telemetry, crash reporting, and sign-in button working.
The theme preview component was moved to the UI crate and it now can
have a click handler on it.
Finally, this commit also changed `client::User.github_login` and
`client::UserStore.by_github_login` to use `SharedStrings` instead of
`Strings`. This change was made because user.github_login was cloned in
several areas including the UI, and was cast to a shared string in some
cases too.
Release Notes:
- N/A
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
This PR updates the user menu in the title bar to show the plan from the
`CloudUserStore` instead of the `UserStore`.
We're still leveraging the RPC connection to listen for `UpdateUserPlan`
messages so that we can get live-updates from the server, but we are
merely using this as a signal to re-fetch the information from Cloud.
Release Notes:
- N/A
This PR temporarily adds back the `GET /user` endpoint to Collab since
we're still using it for local development.
Will remove it again once we update the local development process to
leverage Cloud.
Release Notes:
- N/A
Previously, we would pick an exponent between 0.5 and 2.5, which would
cause a lot of clients to try reconnecting in rapid succession,
overwhelming the server as a result.
This pull request always doubles the previous delay and introduces a
jitter that can, at most, double it.
As part of this, we're also increasing the maximum reconnection delay
from 10s to 30s: this gives us more space to spread out the reconnection
requests.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This PR adds two kill switches for syncing data to and from Stripe using
Collab.
The `cloud-stripe-events-polling` and `cloud-stripe-usage-meters-sync`
feature flags control whether we use Cloud for polling Stripe events and
updating Stripe meters, respectively.
When we're ready to hand off the syncing to Cloud we can enable the
feature flag to do so.
Release Notes:
- N/A
This PR makes it so we attach the value from the `User-Agent` header to
the `handle connection` span.
We'll start sending this header in
https://github.com/zed-industries/zed/pull/35280.
Release Notes:
- N/A
Discussed this with @ConradIrwin. The problem we're having with collab
is that a bunch of LSP requests take a really long time to resolve,
particularly `RefreshCodeLens`. But Those requests are sharing a limited
amount of concurrency that we've allocated for all message traffic on
one connection. That said, there's not _that_ many concurrent requests
made at any one time. The burst traffic seems to top out in the low
hundreds for these requests. So let's just expand the amount of space in
the queue to accommodate these long-running requests while we work on
upgrading our cloud infrastructure.
Release Notes:
- N/A
Co-authored-by: finn <finn@zed.dev>
This PR removes the caching of Stripe price IDs by meter ID on the
`StripeBilling` object, as we weren't actually reading them anywhere.
Release Notes:
- N/A
Instead of selecting a screen to share arbitrarily, we'll now allow user
to select the screen to share. Note that sharing multiple screens at the
time is still not supported (though prolly not too far-fetched).
Related to #4666
Release Notes:
- Added screen selector dropdown to screen share button
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Cole Miller <cole@zed.dev>
This is following feedback from folks that were searching the "close
others" action, available in the tab's context menu, and not finding it
because it was actually named "close inactive", which was confusing. So,
this PR makes sure the tab's menu item and the action have consistent
naming.
Release Notes:
- Rename "CloseInactiveItems" action to "CloseOtherItems" for naming
consistency.
Closes https://github.com/zed-industries/zed/issues/33980
Closes https://github.com/zed-industries/zed/discussions/33979
- Switches to the debounce task pattern for diagnostic summary
computations, which most importantly lets us do them only once when a
large number of DiagnosticUpdated events are received at once.
- Makes workspace diagnostic requests not time out if a partial result
is received.
- Makes diagnostics from workspace diagnostic partial results get
merged.
There might be some related areas where we're not fully complying with
the LSP spec but they may be outside the scope of what this PR should
include.
Release Notes:
- Added support for streaming LSP workspace diagnostics.
- Fixed editor freeze from large LSP workspace diagnostic responses.
Kirill Bulatov