Follow-up to #29625 and #30902
This PR reintroduces auto-intents for brackets in Python and fixes some
cases where an indentation would be triggered if it should not. For
example, upon typing
```python
a = []
```
and inserting a newline after, the next line would be indented although
it shoud not be.
Bracket auto-indentation was tested prior to #29625 but removed there
and the test updated accordingly. #30902 reintroduced this for all
brackets but `()`. I reintroduced this here, reverted the changes to the
test so that indents also happen after typing `()`. This is frequently
used for tuples and multiline statements in Python.
Release Notes:
- Improved auto-indentation when using round brackets in Python.
Closes#31138
Fix edge case where adding newline if there is text afterwards end
delimiter of multiline comment, would continue the comment prefix. This
is fixed by checking for end delimiter on whole line instead of just
assuming it would always be at end.
- [x] Tests
Release Notes:
- Fixed the issue where in some cases the block comment continues to the
next line even though the comment block is already closed.
Closes#31115
This fixes regression caused by
https://github.com/zed-industries/zed/pull/30824 while keeping that fix.
- [x] Test
Release Notes:
- Fixed the issue where adding a newline after the `///` comment would
extend it with `//` instead of `///` in Rust and other similar
languages.
Closes#5255, #1046, #28322, #15728
This PR makes `AddSelectionBelow` and `AddSelectionAbove` not skip lines
that are shorter than the current cursor column. This follows the same
behavior as VSCode and Sublime.
This change is only applicable in the case of an empty selection; if
there is a non-empty selection, it continues to skip empty and shorter
lines to create a Vim-like column selection, which is the better default
for that case.
- [x] Tests
The empty selection no longer skips shorter lines:
https://github.com/user-attachments/assets/4bde2357-20b6-44f2-a9d9-b595c12d3939
Non-empty selection continues to skip shorter lines.
https://github.com/user-attachments/assets/4cd47c9f-b698-40fc-ad50-f2bf64f5519b
Release Notes:
- Improved `AddSelectionBelow` and `AddSelectionAbove` to no longer skip
shorter lines when the selection is empty, aligning with VSCode and
Sublime behavior.
This PR hides hover info/diagnostic popovers when code action menu is
shown. We already hide hover info/diagnostic popover on code completion
menu trigger (handled on input).
Note: It is still possible to see hover popover if code completion or
code action menu is already open. This is intended behavior.
- [x] Test hover popover hides when code action is triggered
Release Notes:
- Fixed issue where info and diagnostic hover popovers were still
visible when code action menu is triggered.
This PR fixes a bug where comments don't extend when cursor is right
next to the second slash. We added `// ` as a prefix character to
correctly position the cursor after a new line, but this broke comment
validation by including that trailing space, which it shouldn't.
Now both line comments and block comments (already handled in JSDoc PR)
can extend right after the prefix without needing an additional space.
Before:
https://github.com/user-attachments/assets/ca4d4c1b-b9b9-4f1b-b47a-56ae35776f41
After:
https://github.com/user-attachments/assets/b3408e1e-3efe-4787-ba68-d33cd2ea8563
Release Notes:
- Fixed issue where comments weren't extending when adding new line
immediately after comment prefix (`//`).
Follow up for https://github.com/zed-industries/zed/pull/30768
This PR makes JSDoc auto comment on new line lot better by:
- Inserting delimiters regardless of whether previous delimiters have
trailing spaces or not
- When on start tag, auto-indenting both prefix and end tag upon new
line
This makes it correct as per convention out of the box. No need to
manually adjust spaces on every new line.
https://github.com/user-attachments/assets/81b8e05a-fe8a-4459-9e90-c8a3d70a51a2
Release Notes:
- Improved JSDoc auto-commenting on newline which now correctly indents
as per convention.
Closes#26274
Adjust the end position of indent guides to prevent them from extending
through empty space.
Also corrected old test values that seemed to have adapted to the
indentation's behavior.
Release Notes:
- Fixed indentation guides extending beyond the final scope in a file.
## Overview
This PR adds the minimap feature to the Zed editor, closely following
the [design from Visual Studio
Code](https://code.visualstudio.com/docs/getstarted/userinterface#_minimap).
When configured, a second instance of the editor will appear to the left
of the scrollbar. This instance is not interactive and it has a slimmed
down set of annotations, but it is otherwise just a zoomed-out version
of the main editor instance. A thumb shows the line boundaries of the
main viewport, as well as the progress through the document. Clicking on
a section of code in the minimap will jump the editor to that code.
Dragging the thumb will act like the scrollbar, moving sequentially
through the document.
## New settings
This adds a `minimap` section to the editor settings with the following
keys:
### `show`
When to show the minimap in the editor.
This setting can take three values:
1. Show the minimap if the editor's scrollbar is visible: `"auto"`
2. Always show the minimap: `"always"`
3. Never show the minimap: `"never"` (default)
### `thumb`
When to show the minimap thumb.
This setting can take two values:
1. Show the minimap thumb if the mouse is over the minimap: `"hover"`
2. Always show the minimap thumb: `"always"` (default)
### `width`
The width of the minimap in pixels.
Default: `100`
### `font_size`
The font size of the minimap in pixels.
Default: `2`
## Providing feedback
In order to keep the PR focused on development updates, please use the
discussion thread for feature suggestions and usability feedback: #26894
## Features left to add
- [x] fix scrolling performance
- [x] user settings for enable/disable, width, text size, etc.
- [x] show overview of visible lines in minimap
- [x] clicking on minimap should navigate to the corresponding section
of code
- ~[ ] more prominent highlighting in the minimap editor~
- ~[ ] override scrollbar auto setting to always when minimap is set to
always show~
Release Notes:
- Added minimap for high-level overview and quick navigation of editor
contents.
---------
Co-authored-by: MrSubidubi <dev@bahn.sh>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Closes#28699
Fixes two cases in the `editor::SelectLargerSyntaxNode` action:
1. When cursor is at the end of a word, it now selects that word first
instead of selecting the whole line.
2. When cursor is at the end of a line, it now selects that line first
instead of selecting the whole code block.
Before and After:
https://github.com/user-attachments/assets/233b891e-15f1-4f10-a51f-75693323c2bd
Release Notes:
- Fixed `editor::SelectLargerSyntaxNode` to properly select nodes when
the cursor is positioned at the end of words or lines.
When starting a selection from only carets, the action
`editor::SelectPrevious` behaved in a manner inconsistent with
`editor::SelectNext` as well as equivalent keybinds in editors such as
VSCode, by selecting substrings of whole words matching the initially
selected string on subsequent triggers.
This fix brings the `select_previous` function in line with
`select_next_internal`by calling `select_match_ranges` (previously an
internal function of `select_next_internal`) in the same way it was
previously used in the function that exhibited expected behavior.
Furthermore, the relevant test was adapted to bring it in line with the
equivalent test for the `editor::SelectNext` action
Closes#24346
Release Notes:
- Fixed inconsistent SelectPrevious behavior
Nathan here: I also tacked on a bunch of UI refinement.
Release Notes:
- Introduced the ability to follow the agent around as it reads and
edits files.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Closes#29544
Fixes an issue where accepting an HTML completion would correctly edit
the start tag but incorrectly update the end tag due to incorrect linked
edit ranges.
I want to handle multi cursor case (as it barely works now), but seems
like this should go first. As, it might need whole `do_completions`
overhaul.
Todo:
- [x] Tests for completion aceept on linked edits
Before:
https://github.com/user-attachments/assets/917f8d2a-4a0f-46e8-a004-675fde55fe3d
After:
https://github.com/user-attachments/assets/84b760b6-a5b9-45c4-85d8-b5dccf97775f
Release Notes:
- Fixes an issue where accepting an HTML completion would correctly edit
the start tag but incorrectly update the end tag.
This PR implements the `ToolCard` for the edit file tool, which allow us
to display an editor with a diff in the thread view with the changes
performed by the model.
- [x] Fix buffer sometimes displaying empty
- [x] Stop buffer from scrolling together with the thread
- [x] Fix multibuffer header sometimes appearing
- [x] Fix buffer height issue
- [x] Implement "full height" expand button
- [x] Add "Jump To File" functionality
- [x] Polish and refine styles
Release Notes:
- agent: Added diff preview cards in the thread view for edits performed
by the agent.
---------
Co-authored-by: João Marcos <marcospb19@hotmail.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Before this change, when syncing a multibuffer (such as
find-all-references) to a remote, we would renumber the excerpts from 1.
This did not matter in the past because the buffers' list of excerpts
could not change. In #27876, I added the ability for excerpts to merge,
which meant that the excerpt list could change. This manifested as
people seeing "invalid excerpt id" panics when syncing.
The initial fix to this (to re-use the excerpt ids from the host) ran
into problems because `insert_excerpts_with_ids_after` assumes that you
call it in excerpt-id order. This change de-optimizes that code to
insert the excerpts 1-by-1 in excerpt-id order, but with the
insert_after set to preserve the correct UI order.
I hope to soon remove this code path and use something more like
set-excerpts-for-path for syncing, but in the meantime we should not
panic.
Release Notes:
- Fix a panic when joining a project with a multibuffer with merged
excerpts
Closes#27994, #29050, #27352, #27616
This PR implements new logic for code completions, which improve cases
where local variables, etc LSP based hints are not shown on top of code
completion menu. The new logic is explained in comment of code.
This new sort is similar to VSCode's completions sort where order of
sort is like:
Fuzzy > Snippet > LSP sort_key > LSP sort_text
whenever two items have same value, it proceeds to use next one as tie
breaker. Changing fuzzy score from float to int based makes it possible
for two items two have same fuzzy int score, making them get sorted by
next criteria.
Release Notes:
- Improved code completions to prioritize LSP hints, such as local
variables, so they appear at the top of the list.
Closes#28787
The context menu appears before the modal because it is a Deferred
element, which is always displayed above normal elements.
Release Notes:
Previously, the editor context menu appeared before the Command Palette.
This commit ensures the editor context menu is hidden when a modal,
including the Command Palette, is opened.
Close#28519
Release Notes:
Update `editor: copy and trim` command:
1. Ignore empty lines in the middle:
```
Line 1
Line 2
```
Will copy text to clipboard:
```
Line 1
Line 2
```
Before this commit trim not performed
1. Fix select use vim line selections, trim not works
Closes#27995
For strings in any language and Markdown, `select_larger_syntax_node`
will first select the word and then expand from there if:
- The cursor is on the word.
- The selection is inside the word.
It will not select the word and will directly proceed to expand if:
- The word is already selected.
- Multiple partial words are selected.
Todo:
- [x] Tests
Release Notes:
- Fixed `select_larger_syntax_node` to first expand to the word within a
string, and then to the larger syntax node.
Release Notes:
- Fixed completions with multiple cursors leaving duplicated prefixes.
- Fixed crash when accepting a completion in a multibuffer with multiple
cursors.
- Vim: improved `single-repeat` after accepting a completion, now
pressing `.` to replay the completion will re-insert the completion text
at the cursor position.
This PR lightly refactors the `EditorMode::Full` exposing two new
methods: `is_full` and `set_mode`.
Motivation is to expose fields that modify the behavior when the editor
is in `Full` mode. By using is `mode.is_full()` instead of
`EditorMode::Full` we can introduce new fields without breaking other
places in the code.
Release Notes:
- N/A
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Closes#22692
Makes it so when undoing a format operation, the selections are set to
where they were at the last edit.
Release Notes:
- Made it so the cursor position is reset to where it was after the last
edit when undoing a format operation. This will only result in different
behavior when you make an edit, scroll away, initiate formatting (either
by saving or manually) and then undo the format.
---------
Co-authored-by: Zed AI <ai@zed.dev>
Closes#25941
Release Notes:
- Corrected SoftTab indentation handling for lines with mixed spaces and
tabs across .go files and other file types.
- Renamed the editor test `test_tab_with_mixed_whitespace` to
`test_tab_with_mixed_whitespace_rust` as it only tested this behavior
for Rust buffers, which have auto-indentation support. This change
clarifies that the test does not cover default files without
language-specific features.
- Added a new editor test `test_tab_with_mixed_whitespace_txt` to ensure
proper coverage for files with no associated language.
While investigating the issue — initially thought to be Go-related — I
discovered that the underlying problem was how soft tabs were calculated
in `Editor::tab`, given that the problem could also be observed on
`.txt` files
The correct soft tab indentation is now determined by treating all `\t`
characters before the cursor (on the same row) as new indentation
levels, resetting the remainder counter accordingly.
https://github.com/user-attachments/assets/78192e98-2b81-43cb-ae6f-7c48cd17d168
A small addition for those coming from JetBrain's IDEs. A behavioral
detail: when any upper case character is detected, the command defaults
to toggling to lower case.
> Note that when you apply the toggle case action to the CamelCase name
format, IntelliJ IDEA converts the name to the lower case.
https://www.jetbrains.com/help/idea/working-with-source-code.html#edit_code_fragments
Release Notes:
- Added an `editor: toggle case` command. Use `cmd-shift-u` for macOS
and `ctrl-shift-u` for Linux, when using the `JetBrains` keymap.
Adds actions so you can have customized keybindings for `insert` and
`replace` modes.
And add `shift-enter` as a default for `replace`, this will override the
default setting
`completions.lsp_insert_mode` which is set to `replace_suffix`, which
tries to "smartly"
decide whether to replace or insert based on the surrounding text.
For those who come from VSCode, if you want to mimic their behavior, you
only have to
set `completions.lsp_insert_mode` to `insert`.
If you want `tab` and `enter` to do different things, you need to remap
them, here is
an example:
```jsonc
[
// ...
{
"context": "Editor && showing_completions",
"bindings": {
"enter": "editor::ConfirmCompletionInsert",
"tab": "editor::ConfirmCompletionReplace"
}
},
]
```
Closes#24577
- [x] Make LSP completion insertion mode decision in guest's machine
(host is currently deciding it and not allowing guests to have their own
setting for it)
- [x] Add shift-enter as a hotkey for `replace` by default.
- [x] Test actions.
- [x] Respect the setting being specified per language, instead of using
the "defaults".
- [x] Move `insert_range` of `Completion` to the Lsp variant of
`.source`.
- [x] Fix broken default, forgotten after
https://github.com/zed-industries/zed/pull/27453#pullrequestreview-2736906628,
should be `replace_suffix` and not `insert`.
Release Notes:
- LSP completions: added actions `ConfirmCompletionInsert` and
`ConfirmCompletionReplace` that control how completions are inserted,
these override `completions.lsp_insert_mode`, by default, `shift-enter`
triggers `ConfirmCompletionReplace` which replaces the whole word.
(and any other LSP server in theory, if it exposes any LSP-ext endpoint
for the same)
Closes https://github.com/zed-industries/zed/issues/16160
* adds a way to disable tree-sitter tasks (the ones from the plugins,
enabled by default) with
```json5
"languages": {
"Rust": "tasks": {
"enabled": false
}
}
}
```
language settings
* adds a way to disable LSP tasks (the ones from the rust-analyzer
language server, enabled by default) with
```json5
"lsp": {
"rust-analyzer": {
"enable_lsp_tasks": false,
}
}
```
* adds rust-analyzer tasks into tasks modal and gutter:
<img width="1728" alt="modal"
src="https://github.com/user-attachments/assets/22b9cee1-4ffb-4c9e-b1f1-d01e80e72508"
/>
<img width="396" alt="gutter"
src="https://github.com/user-attachments/assets/bd818079-e247-4332-bdb5-1b7cb1cce768"
/>
Release Notes:
- Added tasks from rust-analyzer
I wanted this for CONL (https://conl.dev )'s nascent langauge server,
and it seems like most of the support was already wired up on the LSP
side, so this surfaces it into the editor.
Release Notes:
- Added support for the `insert_text_mode` field of completions from the
language server protocol.
A "Near" block acts similarly to a "Below" block, but can (if it's
height is <= one line height) be shown on the end of the preceding line
instead of adding an entire blank line to the editor.
You can test it out by pasting this into `go_to_diagnostic_impl` and
then press `F8`
```
let buffer = self.buffer.read(cx).snapshot(cx);
let selection = self.selections.newest_anchor();
self.display_map.update(cx, |display_map, cx| {
display_map.insert_blocks(
[BlockProperties {
placement: BlockPlacement::Near(selection.start),
height: Some(1),
style: BlockStyle::Flex,
render: Arc::new(|_| {
div()
.w(px(100.))
.h(px(16.))
.bg(gpui::hsla(0., 0., 1., 0.5))
.into_any_element()
}),
priority: 0,
}],
cx,
)
});
return;
```
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
This PR adds `completions.lsp_insert_mode` and effectively changes the
default from `"replace"` to `"replace_suffix"`, which automatically
detects whether to use the LSP `replace` range instead of `insert`
range.
`"replace_suffix"` was chosen as a default because it's more
conservative than `"replace_subsequence"`, considering that deleting
text is usually faster and less disruptive than having to rewrite a long
replaced word.
Fixes#27197Fixes#23395 (again)
Fixes#4816 (again)
Release Notes:
- Added new setting `completions.lsp_insert_mode` that changes what will
be replaced when an LSP completion is accepted. The default is
`"replace_suffix"`, but it accepts 4 values: `"insert"` for replacing
only the text before the cursor, `"replace"` for replacing the whole
text, `"replace_suffix"` that acts like `"replace"` when the text after
the cursor is a suffix of the completion, and `"replace_subsequence"`
that acts like `"replace"` when the text around your cursor is a
subsequence of the completion (similiar to a fuzzy match). Check [the
documentation](https://zed.dev/docs/configuring-zed#LSP-Insert-Mode) for
more information.
---------
Co-authored-by: João Marcos <marcospb19@hotmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
