Release Notes:
- N/A
Fixes#9207
Known Issues:
- [ ] ~~After launching Zed and immediately trying to change input
method, the input panel will appear at Point{0, 0}~~
- [ ] ~~`ime_handle_preedit` should not trigger `write_to_primary`~~
Move to other PR
- [ ] ~~Cursor is visually stuck at the end.~~ Move to other PR
Currently tested with KDE & fcitx5.
This PR adds a new `WithRemSize` element to the `ui` crate.
This element can be used to create an element tree that has a different
rem size than the base window.
`WithRemSize` can be nested, allowing for subtrees that have a different
rem size than their parent and their children.
<img width="912" alt="Screenshot 2024-05-16 at 2 25 28 PM"
src="https://github.com/zed-industries/zed/assets/1486634/f599cd9f-c101-496b-93e8-06e570fbf74f">
Release Notes:
- N/A
This PR adds some ergonomic improvements when working with GPUI
`Global`s.
Two new traits have been added—`ReadGlobal` and `UpdateGlobal`—that
provide associated functions on any type that implements `Global` for
accessing and updating the global without needing to call the methods on
the `cx` directly (which generally involves qualifying the type).
I looked into adding `ObserveGlobal` as well, but this seems a bit
trickier to implement as the signatures of `cx.observe_global` vary
slightly between the different contexts.
Release Notes:
- N/A
Adding `proxy` keyword to configure proxy while using zed. After setting
the proxy, restart Zed to acctually use the proxy.
Example setting:
```rust
"proxy" = "socks5://localhost:10808"
"proxy" = "http://127.0.0.1:10809"
```
Closes#9424, closes#9422, closes#8650, closes#5032, closes#6701,
closes#11890
Release Notes:
- Added settings to configure proxy in Zed
---------
Co-authored-by: Jason Lee <huacnlee@gmail.com>
Currently , on Windows 10, we used a `Timer` to trigger the vsync event,
but the `Timer`'s time precision is only about 15ms, which means a
maximum of 60FPS. This PR introduces a new function to allow for higher
frame rates on Windows 10.
And after reading the codes, I found that zed triggers a draw after
handling mouse or keyboard events, so we don't need to call draw again
when we handle `WM_*` messages. Therefore, I removed the
`invalidate_client_area` function.
Release Notes:
- N/A
This PR brings support for all `OpenType` font features to
`macOS(v10.10+)`. Now, both `Windows`(with #10756 ) and `macOS` support
all font features.
Due to my limited familiarity with the APIs on macOS, I believe I have
made sure to call `CFRelease` on all variables where it should be
called.
Close#11486 , and I think the official website's
[documentation](https://zed.dev/docs/configuring-zed) can be updated
after merging this PR.
> Zed supports a subset of OpenType features that can be enabled or
disabled for a given buffer or terminal font. The following OpenType
features can be enabled or disabled too: calt, case, cpsp, frac, liga,
onum, ordn, pnum, ss01, ss02, ss03, ss04, ss05, ss06, ss07, ss08, ss09,
ss10, ss11, ss12, ss13, ss14, ss15, ss16, ss17, ss18, ss19, ss20, subs,
sups, swsh, titl, tnum, zero.
https://github.com/zed-industries/zed/assets/14981363/44e503f9-1496-4746-bc7d-20878c6f8a93
Release Notes:
- Added support for **all** `OpenType` font features to macOS.
Previously, we had an instance buffer pool that could only allocate
buffers with a fixed size (hardcoded to 2mb). This caused certain scenes
to render partially, e.g. when showing tens of thousands of glyphs on a
big screen.
With this commit, when `MetalRenderer` detects that a scene would be too
large to render using the current instance buffer size, it will:
- Clear the existing instance buffers
- Allocate new instance buffers that are twice as large
- Retry rendering the scene that failed with the newly-allocated buffers
during the same frame.
This fixes#11615.
Release Notes:
- Fixed rendering issues that could arise when having large amounts of
text displayed on a large display. Fixed by dynamically increasing the
size of the buffers used on the GPU.
([#11615](https://github.com/zed-industries/zed/issues/11615)).
Before:
https://github.com/zed-industries/zed/assets/1185253/464463be-b61c-4149-a417-01701699decb
After:
https://github.com/zed-industries/zed/assets/1185253/4feacf5a-d862-4a6b-90b8-317ac74e9851
Co-authored-by: Antonio <me@as-cii.com>
Fixes: #11715
(also apply alpha of the color to wavy ones while we're at it)
Release Notes:
- Fixed display of straight underlines when using the blade renderer
(#11715)
If you go to the file tree and press "x" (which is
"project_panel::RevealInFinder"). It will open the default file
manager(in my case nautilus). But on Linux it makes Zed unresponsive.
This fixes that.
Release Notes:
- Fixed Zed blocked after opening file manager in the file tree on
Linux.
Zed can detect changes in monitor connections and disconnections and
provide corresponding feedback. For example, if the current window's
display monitor is disconnected, the window will be moved to the primary
monitor. And now Zed always opens on the monitor specified in
`WindowParams`.
Release Notes:
- N/A
The previous implementation relied on a background thread to wake up the
main thread,
which was prone to priority inversion under heavy load.
In a synthetic test, where we spawn 200 git processes while doing a 5ms
timeout, the old version blocked for 5-80ms, the new version blocks for
5.1-5.4ms.
Release Notes:
- Improved responsiveness of the main thread under high system load
While these would match how macOS handles this scenario, they crash on
Catalina, and require mouse clicks to interact.
cc @bennetbo
Release Notes:
- N/A
This PR leverages a more modern Windows API to implement
`WindowsDispatcher`, aligning its implementation more closely with that
of the `macOS` platform. The following improvements have been made:
1. Similar to `macOS`, there is no longer a need to use `sender` and
`receiver` to dispatch a `Runnable` on the main thread.
2. There is also no longer a need to use an `Event` for synchronization.
3. Consistent with #7506 and #11269, `Runnable` is now executed with
high priority.
However, this PR raises the minimum Windows version requirement of
`GPUI` to Windows 10, specifically Windows 10 Fall Creators Update
(10.0.16299). However, the `alacritty_terminal` dependency in Zed relies
on `conPTY` on Windows, an API introduced in the Windows 10 Fall
Creators Update. Therefore, the impact of this PR on Zed should be
minimal. I'd like to hear your voices about this PR, especially about
the minimum Windows version bumping.
Release Notes:
- N/A
A minor thing I've spotted and decided to fix on the spot.
It was being cloned twice within the body of that function (one of which
was redundant even without this PR); now in most cases we go down from 2
clones to 0.
Release Notes:
- N/A
This pull request introduces a new `markdown` crate which is capable of
parsing and rendering a Markdown source. One of the key additions is
that it enables text selection within a `Markdown` view. Eventually,
this will replace `RichText` but for now the goal is to use it in the
assistant revamped assistant in the spirit of making progress.
<img width="711" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/b56c777b-e57c-42f9-95c1-3ada22f63a69">
Note that this pull request doesn't yet use the new markdown renderer in
`assistant2`. This is because we need to modify the assistant before
slotting in the new renderer and I wanted to merge this independently of
those changes.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Alp <akeles@umd.edu>
Co-authored-by: Zachiah Sawyer <zachiah@proton.me>
It seems that on the first frame after the system resumes from sleep,
`dcomp_vsync_fn` mistakenly detects the `timer_stop_event` triggering
and exits the loop.
Release Notes:
- N/A
Release Notes:
- N/A
## What
Addresses a long-standing issue of doing the blending operations in sRGB
space. Currently, the input HSL colors are provided in sRGB space and
converted to linear in the vertex shader. Conversion back to sRGB, which
is required on most platforms today, happens at the very end of the
pipeline when writing into sRGB render target.
Note-1: in the future we may consider doing HSL -> sRGB -> Linear
transform on CPU before feeding into shaders. However, I don't expect
any significant difference here given that we are likely bound by fill
rate and pixel shaders, anyway.
Note-2: the graphics stack is programmed to detect if the platform
supports presenting in linear color space and avoids converting to sRGB
at the end in this case. However, on my Z13 laptop this isn't supported
by the RADV driver.
Closes#7684Closes#11462
@jansol please confirm if you can!
## Comparison
Screenshot of the Glazier theme before the change:
Same theme after the change:
Previously, `DirectWrite` had been following the text system
implementation on `macOS`, using the font's postscript name to
differentiate between different font faces. However, I noticed
occasional rendering issues, such as fonts incorrectly rendering as
italics. Later, I discovered that on `Windows`, the postscript name is
**not** unique. Surprisingly, even the same font can have different
postscript names on macOS and Windows! It's hard to believe! The
postscript name of a font face should be obtained from the same font
table. Why would the same font face have different names?
For example, the postscript name of ZedMono on `macOS` is
`Zed-Mono-Bold-Extended-Italic`, while on `Windows`, it is
`Zed-Mono-Extended`, missing weight and style information, leading to
incorrect rendering.
This PR introduces a `FontIdentifier` struct to uniquely identify font
faces.
Release Notes:
- N/A
As per Microsoft documentation, positive values scroll right, not left.
GPUI was incorrectly assuming it perfectly mirrored vertical scrolling.
Fixes#11515
Release Notes:
- N/A
This fixes restart after updates not working on Linux.
On Linux we can't reliably get the binary path after an update, because
the original binary was deleted and the path will contain ` (deleted)`.
See: https://github.com/rust-lang/rust/issues/69343
We *could* strip ` (deleted)` off, but that feels nasty. So instead we
save the original binary path, before we do the installation, then
restart.
Later on, we can also change this to be a _new_ binary path returned by
the installers, which we then have to start.
Release Notes:
- N/A
Now, regardless of how the Zed window is closed, Zed can remember the
window's restore size.
- [x] Windows implementation
- [x] macOS implementation
- [x] Linux implementation (partial)
- [x] update SQL data base (mark column `fullscreen` as deprecated)
The current implementation on Linux is basic, and I'm not sure if it's
correct.
The variable `fullscreen` in SQL can be removed, but I'm unsure how to
do it.
edit: mark `fullscreen` as deprecated
### Case 1
When the window is closed as maximized, reopening it will open in the
maximized state, and returning from maximized state will restore the
position and size it had when it was maximized.
https://github.com/zed-industries/zed/assets/14981363/7207752e-878a-4d43-93a7-41ad1fdb3a06
### Case 2
When the window is closed as fullscreen, reopening it will open in
fullscreen mode, and toggling fullscreen will restore the position and
size it had when it entered fullscreen (note that the fullscreen
application was not recorded in the video, showing a black screen, but
it had actually entered fullscreen mode).
https://github.com/zed-industries/zed/assets/14981363/ea5aa70d-b296-462a-afb3-4c3372883ea3
### What's more
- As English is not my native language, some variable and struct names
may need to be modified to match their actual meaning.
- I am not familiar with the APIs related to macOS and Linux, so
implementation for these two platforms has not been done for now.
- Any suggestions and ideas are welcome.
Release Notes:
- N/A
This aligns the Windows platform implementation with a code style
similar to macOS platform, eliminating most of the `Cell`s and
`Mutex`es. This adjustment facilitates potential future porting to a
multi-threaded implementation if required.
Overall, this PR made the following changes: it segregated all member
variables in `WindowsPlatform` and `WindowsWindow`, grouping together
variables that remain constant throughout the entire app lifecycle,
while placing variables that may change during app runtime into
`RefCell`.
Edit:
During the code refactoring process, a bug was also fixed.
**Before**:
Close window when file has changed, nothing happen:
https://github.com/zed-industries/zed/assets/14981363/0bcda7c1-808c-4b36-8953-a3a3365a314e
**After**:
Now `should_close` callback is properly handled
https://github.com/zed-industries/zed/assets/14981363/c8887b72-9a0b-42ad-b9ab-7d0775d843f5
Release Notes:
- N/A
This implements `app_version` on Linux by using an optional,
compile-time `RELEASE_VERSION` env var that can be set.
We settled on the `RELEASE_VERSION` as the name, since it's similar to
`RELEASE_CHANNEL` which we use in Zed.
cc @ConradIrwin @mikayla-maki
Release Notes:
- N/A
Co-authored-by: Bennet <bennetbo@gmx.de>
This fixes a race-condition that showed up when trying to restart
Nightly/Preview/...
When running with these release channels, Zed tries to ensure that
there's only one instance of Zed running.
It does that by listening on a TCP socket to which other instances can
connect on start. If the other instance receives a message, it knows
that another Zed instance is running and exits.
On Linux, though, we ran into a race condition:
1. `kill -0`, which checks whether a process is still running, returns
an error, signalling that the old Zed process has exited
2. BUT: the process was still listening on the TCP port.
It seems like that on Linux, process resources aren't guaranteed to be
cleaned up as soon as signal handling stops working for a process.
The fix is to wait until the process is no longer listening on any TCP
sockets.
There's a slight downside to this: GPUI processes that never listen on
any TCP sockets now have to pay the cost of an additional `lsof` call
when restarting. We do think that it's a reasonable tradeoff for now
though, since the other options (extending the platform interface to
provide callbacks, sharing the listening port in the framework, ...)
seem wider-reaching only to fix a very local bug.
Release Notes:
- N/A
Co-authored-by: Bennet <bennetbo@gmx.de>
Fixed various small issues on Linux, mainly on Wayland.
Apart from the first commit (which should be self-describing), the other
commits have a description explaining the issue and what they do.
caadc58bead6cb654d7e1da25faaba72be79cd27 should fix
https://github.com/zed-industries/zed/issues/11037
Release Notes:
- N/A
This PR replaces all pointer events on X11 with their XI2 equivalents,
which fixes problems with scroll events not being reported when a mouse
button is down. Additionally it closes#11206 by resetting the tracked
global scroll valulator position with `None` on a leave event to prevent
a large scroll delta if scrolling is done outside the window. Lastly, it
resolves the bad window issue kvark was having.
Release Notes:
- Fixed X11 Scroll snapping (#11206 ).
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Release Notes:
- N/A
This changes the first click detection in Wayland by requiring first
click after the keyboard loses focus, and after a `wl_pointer` enters a
window that has keyboard focus
This PR makes the `border` methods require an explicit width instead of
defaulting to 1px.
This breaks convention with Tailwind, but it makes GPUI more consistent
with itself. We already have an edge case where the parameterized method
had to be named `border_width`, since `border` was taken up by an alias
for the 1px variant.
### Before
```rs
div()
.border()
.border_t()
.border_r()
.border_b()
.border_l()
.border_width(px(7.))
```
### After
```rs
div()
.border_1()
.border_t_1()
.border_r_1()
.border_b_1()
.border_l_1()
.border(px(7.))
```
Release Notes:
- N/A
Fernando Tagawa
Marshall Bowers
张小白andJason Lee
Thorsten BallandAntonio
jansol
Flafy
Mikayla Maki
apricotbucket28andAkilan Elango
Conrad Irwin
Piotr Osiewicz
CharlesChen0823
Dzmitry Malyshau
LoganDark
Soroush MirzaeiandMikayla
Owen LawandMikayla Maki