Completes #7228.
Adds back Backspace as the main delete key binding and makes Linux
bindings consistent with macOS
Release Notes:
- ⌘-Delete/⌘-Backspace will now suppress deletion confirmation prompts
in project panel
([#7228](https://github.com/zed-industries/zed/issues/7228)).
For #4440, I've only added support for normal, if it's visual mode,
would we like this to delete the current selection row and enter insert
mode?
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
The important change here is to ensure that undo never lands you in
visual mode; but we also take care to restore the selection the same way
vim does (visual line goes to beginning of line, visual block to the top
left, etc.).
To help make this behaviour feel right we also group any deletions that
started insert mode with the first text inserted.
Fixes: #7521
Release Notes:
- vim: Improved undo. It will now restore you to normal mode in the same
position as vim, and group deletions caused by `c` or `s` with the
concomitant insert.
([#7521](https://github.com/zed-industries/zed/issues/7521)).
`[x` will select the larger syntax node, `]x` the smaller one. Inspired
by https://github.com/tpope/vim-unimpaired.
Release Notes:
- Added `[x` and `]x` as default keybindings in Vim mode to select
larger and smaller syntax nodes respectively.
This PR adds support for `ap`/`ip` text objects in Vim mode and allows
users to perform paragraph-based operations.
Cases where compatibility with Neovim's behavior is checked, cases where
there are known differences in behavior with Neovim (cases where the
landing position is other than the beginning of the line), and cases
where the Neovim behavior in the test suite seems strange are separated
in the test code so that they can be identified.
Release Notes:
- Added support for `ap` and `ip` paragraph text objects in Vim mode
([#7359](https://github.com/zed-industries/zed/issues/7359)).
`z.` is similar to zz but moves the cursor to the first non-blank
character.
From the documentation:
```
z. Redraw, line [count] at center of window (default cursor line). Put cursor at first non-blank in the line.
zz Like "z.", but leave the cursor in the same column.
```
Release Notes:
- Support the `z.` vim keybinding: Center cursor in window and put
cursor at first non-blank
This solves a major usability problem in Zed, that there's no way to
temporarily disable auto formatting without toggling the whole feature
off.
fixes https://github.com/zed-industries/zed/issues/5230
Release Notes:
- Added a new `workspace::SaveWithoutFormatting`, bound to `cmd-k s`, to
save a file without invoking the auto formatter.
Follow-up of
https://github.com/zed-industries/zed/issues/8651#issuecomment-1973411072
Zed current default is still to reuse the current window, but now it's
possible to do
```json
"alt-cmd-o": [
"projects::OpenRecent",
{
"create_new_window": true
}
]
```
and change this.
menu::Secondary confirm does the action with opposite window creation
strategy.
Release Notes:
- Improved open recent projects flexibility: settings can change whether
`menu::Confirm` opens a new window or reuses the old one
This practice makes it difficult to locate todo!s in my code when I'm
working. Let's take out the bang if we want to keep doing this.
Release Notes:
- N/A
Even though I use Vim mode, I'd love to have this in the command
palette/fuzzy finder. It's an Emacs keybinding, but also supported by
macOS nearly everywhere.
Release Notes:
- N/A
I would like to keep diagnostics open on one side, and process them on
the other.
Release Notes:
- Added `editor::OpenExcerptsSplit` (bound to `cmd-k enter`) to open the
selected excerpts in the adjacent pane
- vim: Added `ctrl-w d`, `ctrl-w shift-d` and `ctrl-w space` for
`editor::GoTo{,Type}Definition` and `editor::OpenExcerptsSplit`
a simple code for html tag support, I've only done the basics, and if
it's okay, I'll optimize and organize the code, and adapt other parts
like `is_multiline`, `always_expands_both_ways`, `target_visual_mode`,
etc
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR formats the JSON files in the `assets/` directory with Prettier.
This should help avoid some of the changes in formatting when these
files are touched by contributors.
Release Notes:
- N/A
This PR adds a new `argument` vim text object, inspired by
[targets.vim](https://github.com/wellle/targets.vim).
As it's the first vim text object to use the syntax tree, it needed to
operate on the `Buffer` level, not the `MultiBuffer` level, then map the
buffer coordinates to `DisplayPoint` as necessary.
This required two main changes:
1. `innermost_enclosing_bracket_ranges` and `enclosing_bracket_ranges`
were moved into `Buffer`. The `MultiBuffer` implementations were updated
to map to/from these.
2. `MultiBuffer::excerpt_containing` was made public, returning a new
`MultiBufferExcerpt` type that contains a reference to the excerpt and
methods for mapping to/from `Buffer` and `MultiBuffer` offsets and
ranges.
Release Notes:
- Added new `argument` vim text object, inspired by
[targets.vim](https://github.com/wellle/targets.vim).
I really think storybook is a cool standalone app but there are some
usability issues that are getting in the way of making this a fun tool
to use.
Currently it is not easy to gracefully exit out of storybook.
In fact even trying to Ctrl-c out of storybook seems currently broken to
me...
So the only real way to exit out of storybook is to kill the process
after a Ctrl-z.
This PR attempts to make this much easier by adding a simple app_menu
with a menu item called quit along with the ability to *Cmd-q* out of
storybook as well...
Both the menu item quit and *Cmd-q* gracefully exit storybook.
There are still a bunch of issues with storybook which I plan on
addressing in future PR's but this is a start and something that to me
is the highest priority to make storybook more functional and easy to
use moving forward.
One of my longer term goals of storybook is to have it be a nice stand
alone application similar to
[Loungy](https://github.com/MatthiasGrandl/Loungy) which can be used as
a nice tutorial application for how to develop a real world *gpui* app.
For that reason I added a *assets/keymaps/storybook.json* file as well.
Release Notes:
- vim: Added a setting to control default clipboard behaviour. `{"vim":
{"use_system_clipboard": "never"}}` disables writing to the clipboard.
`"on_yank"` writes to the system clipboard only on yank, and `"always"`
preserves the current behavior. ([#4390
](https://github.com/zed-industries/zed/issues/4390))
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Undoubtedly not perfect, but this should be something we can work off
of.
Note that matching keybindings with ctrl in them is currently broken on
linux (or at least x11). This keymap might just manage to be less useful
than using the macos one on linux until that is fixed... the proximate
cause of this is that the `key` field of the `Keystroke` struct looks
like `"\u{e}"` instead of `"n"` when `ctrl-n` is pressed.
Release Notes:
- N/A
This adds one feature I've been missing a lot in Vim mode: `gx` to open
the URL under the cursor.
Technically, in Vim, `gx` opens more "paths", not just URLs, but I think
this is a good start.
Release Notes:
- Added `gx` to Vim mode to open the URL under the cursor.
Demo:
https://github.com/zed-industries/zed/assets/1185253/6a19490d-b61d-40b7-93e8-4819599f6977
Activated by keystrokes g-e.
Release Notes:
- vim: Added `ge` and `gE` for go to Previous Word End.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Previously it wasn't possible to create a keybinding for this action
because it required an argument.
Now the action takes the active item of the pane and if it's a
multi-buffer the first one.
This also adds a default keybinding for Vim mode: `-` will reveal the
file in the project panel.
Fixes#7485.
Release Notes:
- Added `pane::RevealInProjectPanel` as an action in the command
palette. ([#7485](https://github.com/zed-industries/zed/issues/7485)).
Co-authored-by: Antonio <antonio@zed.dev>
Release Notes:
- Improved Jetbrains keybindings to include cmd+alt+left/right to go
back and forwards between panes rather than the default previous / next
pane
Signed-off-by: James Gee <1285296+geemanjs@users.noreply.github.com>
This fixes `cmd+k` in the terminal taking 1s to have an effect. It is
now immediate.
It also fixes#7270 by ensuring that we don't set a bad state when
matching keybindings.
It matches keybindings per context and if it finds a match on a lower
context it doesn't keep pending keystrokes. If it finds two matches on
the same context level, requiring more keystrokes, then it waits.
Release Notes:
- Fixed `cmd-k` in terminal taking 1s to have an effect. Also fixed
sporadic non-matching of keybindings if there are overlapping
keybindings.
([#7270](https://github.com/zed-industries/zed/issues/7270)).
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Turns out that these keybindings are active in Vim *and* in non-Vim mode
and they shadow `Ctrl-w` in terminals.
We should fix `Ctrl-w` being shadowed, but until then let's remove the
default keybindings.
Release Notes:
- N/A
Co-authored-by: Kirill <kirill@zed.dev>
Co-authored-by: Conrad <Conrad@zed.dev>
This adds the ability to navigate to/from docks (Terminal, Project,
Collaboration, Assistant) via keybindings.
When using the `ActivatePaneInDirection` keybinding from the
left/bottom/right dock, we check whether the movement is towards the
center panel. If it is, we focus the last active pane.
Fixes https://github.com/zed-industries/zed/issues/6833 and it came up
in a few other tickes/discussions.
Release Notes:
- Added ability to navigate to docks and back to the editor using the
`workspace::ActivatePaneInDirection` action (by default bound to `Ctrl-w
[hjkl]` in Vim mode).
([#6833](https://github.com/zed-industries/zed/issues/6833)).
## Drawback
There's this weird behavior: if you start Zed and no files are opened,
you focus terminal, go left (project panel), then back to right to
terminal, the terminal isn't focused. Even though we focus it in the
code.
Maybe this is a bug in the current focus handling code?
## Demo
https://github.com/zed-industries/zed/assets/1185253/5d56db40-36aa-4758-a3bc-7a0de20ce5d7
---------
Co-authored-by: Piotr <piotr@zed.dev>
This fixes#6815 by implementing `<space>` in normal mode in Vim. Turns
out that `<space>` behaves like a reverse `<backspace>` (which we
already had): it goes to the right and, if at end of line, to the next
line.
That means I had to touch `movement::right`, which is used in a few
places, but it's documentation said that it would go to the next line,
which it did *not*. So I changed the behaviour.
But I would love another pair of eyes on this, because I don't want to
break non-Vim behaviour.
Release Notes:
- Added support for `<space>` in Vim normal mode: `<space>` goes to the
right and to next line if at end of line.
([#6815](https://github.com/zed-industries/zed/issues/6815)).
This fixes `t` not being repeatable with `,` and `;` in normal mode.
Release Notes:
- Fixed `t` in Vim mode not being repeatable with `,` or `;`.
---------
Co-authored-by: Conrad <conrad@zed.dev>
This change implements the vim
[motion](https://github.com/vim/vim/blob/master/runtime/doc/motion.txt)
commands to move the cursor to the top, middle and bottom of the visible
view. This feature is requested in
https://github.com/zed-industries/zed/issues/4941.
This change takes inspiration from
[crates/vim/src/normal/scroll.rs](https://github.com/zed-industries/zed/blob/main/crates/vim/src/normal/scroll.rs).
A note on the behavior of these commands: Because
`NeovimBackedTestContext` requires compatibility with nvim, the current
implementation causes slightly non-standard behavior: it causes the
editor to scroll a few lines. The standard behavior causes no scrolling.
It is easy enough to account for the margin by adding
`VERTICAL_SCROLL_MARGIN`. However, doing so will cause test failures due
to the disparity between nvim and zed states. Perhaps
`NeovimBackedTestContext` should have a switch to be more tolerant for
such cases.
Release Notes:
- Added support for moving to top, middle and bottom of the screen in
vim mode (`H`, `M`, and `L`)
([#4941](https://github.com/zed-industries/zed/issues/4941)).
Mayfield