Closes#41125
Release Notes:
- Fixed `SwitchToHelixNormalMode` to keep selection
- Added default keybinds for `SwitchToHelixNormalMode` when in Helix
mode
Closes https://github.com/zed-industries/zed/issues/40047
Closes https://github.com/zed-industries/zed/issues/24798
Closes https://github.com/zed-industries/zed/issues/24788
Before, each editor, even if it's the same buffer split in 2, was
querying for inlay hints separately, and storing the whole inlay hint
twice, in `Editor`'s `display_map` and its `inlay_hint_cache` fields.
Now, instead of `inlay_hint_cache`, each editor maintains a minimal set
of metadata (which area was queried by what task) instead, and all LSP
inlay hint data had been moved into `LspStore`, both local and remote
flavors store the data.
This allows Zed, as long as a buffer is open, to reuse the inlay hint
data similar to how document colors and code lens are now stored and
reused.
Unlike other reused LSP data, inlay hints data is the first one that's
possible to query by document ranges and previous version had issue with
caching and invalidating such ranges already queried for.
The new version re-approaches this by chunking the file into row ranges,
which are queried based on the editors' visible area.
Among the corresponding refactoring, one notable difference in inlays
display are multi buffers: buffers in them are not
[registered](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_didOpen)
in the language server until a caret/selection is placed inside their
excerpts inside the multi buffer.
New inlays code does not query language servers for unregistered
buffers, as servers usually respond with empty responses or errors in
such cases.
Release Notes:
- Reworked inlay hints to be less error-prone
---------
Co-authored-by: Lukas Wirth <lukas@zed.dev>
Co-authored-by: dino <dinojoaocosta@gmail.com>
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
- Add `skip_soft_wrap` field to both `AddSelectionAbove` and
`AddSelectionBelow` actions. When set to `true`, which is now
the default this will skip soft wrapped lines when extending the
selections.
- Move the `start_of_relative_buffer_row` function from the
`vim::motion` module to the `editor::display_map::DisplaySnapshot`
implementation as a method.
- Update the default behavior for both `editor: add selection above` and
`editor: add selection below` commands in order to skip over soft
wrapped lines by default, mirroring VS Code's default behavior.
- Update existing keymaps to specify this `skip_soft_wrap` value for
both `AddSelectionAbove` and `AddSelectionBelow` actions.
Closes#16979
Release Notes:
- Updated both the `editor: add selection above` and `editor: add
selection below` commands to ignore soft wrapped lines. If you wish to
restore the old behavior, add the following to your keymap file:
```
{
"context": "Editor",
"bindings": {
"cmd-alt-up": ["editor::AddSelectionAbove", { "skip_soft_wrap": false
}],
"cmd-alt-down": ["editor::AddSelectionBelow", { "skip_soft_wrap": false
}]
}
}
```
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Update Vim's `%` motion to first attempt finding the exact matching
bracket/tag under the cursor, then fall back to the previous
nearest-enclosing logic if none is found. This prevents accidentally
jumping to nested pairs in languages like TSX and Svelte where `<>`,
`</>`, and `/>` are also treated as brackets.
Closes#39368
Release Notes:
- Fixed an edge case with the `%` motion in vim, where the cursor could
end up in a closing HTML tag instead of the matching bracket
We have unnecessary clones for the fields here as most of the snapshots
contain the others hierarchically.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
These changes fix an issue with vim's visual block mode when soft
wrapping is enabled. In this situation, if one was to move the cursor
either up or down, the selection would be updated to include visual
(wrapped) rows, instead of only the buffer rows. For example, take the
following contents:
```
1 | And here's a very long line that is wrapping
at this exact point.
2 | And another very long line that is will also
wrap at this exact point.
```
If one was to place the cursor at the start of the first line, character
`A`, trigger visual block mode with `ctrl-v` and then move down one line
with `j`, the selection would end up as (with [X] representing the
selected characters):
```
1 | [A]nd here's a very long line that is wrapping
[a]t this exact point.
2 | [A]nd another very long line that is will also
wrap at this exact point.
```
Instead of the expected:
```
1 | [A]nd here's a very long line that is wrapping
at this exact point.
2 | [A]nd another very long line that is will also
wrap at this exact point.
```
With the changes in this commit, `Vim.visual_block_motion` will now
leverage buffer rows in order to navigate to the next or previous row.
Release Notes:
- Fixed handling of soft wrapped lines in vim's visual block mode
Closes#5355
Release Notes:
- Fixed rendering glitches with files with more than 16 million lines
(that occured due to floating number rounding errors).
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Please credit @eliaperantoni, for the original PR (#34136).
Merge after (#34060) to avoid conflicts.
Closes https://github.com/zed-industries/zed/issues/33838
Closes https://github.com/zed-industries/zed/issues/33906
Release Notes:
- Helix will no longer sometimes fall out into "normal" mode, will
remain in "helix normal" (example: vv)
- Added dedicated "helix select" mode that can be targeted by
keybindings
Known issues:
- [ ] Helix motion, especially surround-add will not properly work in
visual mode, as it won't call `helix_move_cursor`. It is possible
however to respect self.mode in change_selection now.
- [ ] Some operations, such as `Ctrl+A` (increment) or `>` (indent) will
collapse selection also. I haven't found a way to avoid it.
---------
Co-authored-by: fantacell <ghub@giggo.de>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
**Summary**
Fixes#29134 - Visual mode cursor incorrectly jumps past empty lines
that contain inlay hints (type hints).
**Problem**
When in VIM visual mode, pressing j to move down from a longer line to
an empty line that contains an inlay hint would cause the cursor to skip
the empty line entirely and jump to the next line. This only occurred
when moving down (not up) and only in visual mode.
**Root Cause**
The issue was introduced by commit f9ee28db5e which added bias-based
navigation for handling multi-line inlay hints. When using Bias::Right
while moving down, the clipping logic would place the cursor past the
inlay hint, causing it to jump to the next line.
**Solution**
Added logic in up_down_buffer_rows to detect when clipping would place
the cursor within an inlay hint position. When detected, it uses the
buffer column position instead of the display column to avoid jumping
past the hint.
**Testing**
- Added comprehensive test case
test_visual_mode_with_inlay_hints_on_empty_line that reproduces the
exact scenario
- Manually verified the fix with the reproduction case from the issue
- All 356 tests pass with `cargo test -p vim`
**Release Notes:**
- Fixed VIM visual mode cursor jumping past empty lines with type hints
when navigating down
This removes around 900 unnecessary clones, ranging from cloning a few
ints all the way to large data structures and images.
A lot of these were fixed using `cargo clippy --fix --workspace
--all-targets`, however it often breaks other lints and needs to be run
again. This was then followed up with some manual fixing.
I understand this is a large diff, but all the changes are pretty
trivial. Rust is doing some heavy lifting here for us. Once I get it up
to speed with main, I'd appreciate this getting merged rather sooner
than later.
Release Notes:
- N/A
In vim and zed (vim and helix modes) typing "tx" will jump before the
next `x`, but typing it again won't do anything. But in helix the cursor
just jumps before the `x` after that. I added that in helix mode.
This also solves another small issue where the selection doesn't include
the first `x` after typing "fx" twice. And similarly after typing "Fx"
or "Tx" the selection should include the character that the motion
startet on.
Release Notes:
- helix: Fixed inconsistencies in the "f" and "t" motions
Closes #ISSUE
Adds a new `documentation` method to actions, that is extracted from doc
comments when using the `actions!` or derive macros.
Additionally, this PR adds doc comments to as many action definitions in
Zed as possible.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
Closes #ISSUE
Release Notes:
- N/A
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
Closes#23527Closes#30183
Closes some Discord chats
Release Notes:
- vim: Motions now push to the jump list using the same logic as vim
(i.e.
`G`/`g g`/`g d` always do, but `j`/`k` always don't). Most non-vim
actions
(including clicking with the mouse) continue to push to the jump list
only
when they move the cursor by 10 or more lines.
Instead of a menagerie of macros for implementing `Action`, now there
are just two:
* `actions!(editor, [MoveLeft, MoveRight])`
* `#[derive(..., Action)]` with `#[action(namespace = editor)]`
In both contexts, `///` doc comments can be provided and will be used in
`JsonSchema`.
In both contexts, parameters can provided in `#[action(...)]`:
- `namespace = some_namespace` sets the namespace. In Zed this is
required.
- `name = "ActionName"` overrides the action's name. This must not
contain "::".
- `no_json` causes the `build` method to always error and
`action_json_schema` to return `None`
and allows actions not implement `serde::Serialize` and
`schemars::JsonSchema`.
- `no_register` skips registering the action. This is useful for
implementing the `Action` trait
while not supporting invocation by name or JSON deserialization.
- `deprecated_aliases = ["editor::SomeAction"]` specifies deprecated old
names for the action.
These action names should *not* correspond to any actions that are
registered. These old names
can then still be used to refer to invoke this action. In Zed, the
keymap JSON schema will
accept these old names and provide warnings.
- `deprecated = "Message about why this action is deprecation"`
specifies a deprecation message.
In Zed, the keymap JSON schema will cause this to be displayed as a
warning. This is a new feature.
Also makes the following changes since this seems like a good time to
make breaking changes:
* In `zed.rs` tests adds a test with an explicit list of namespaces. The
rationale for this is that there is otherwise no checking of `namespace
= ...` attributes.
* `Action::debug_name` renamed to `name_for_type`, since its only
difference with `name` was that it
* `Action::name` now returns `&'static str` instead of `&str` to match
the return of `name_for_type`. This makes the action trait more limited,
but the code was already assuming that `name_for_type` is the same as
`name`, and it requires `&'static`. So really this just makes the trait
harder to misuse.
* Various action reflection methods now use `&'static str` instead of
`SharedString`.
Release Notes:
- N/A
Closes#27998
Also fixed an issue where jumping back from closing to opening tags
didn't work in javascript due to missing brackets in our tree-sitter
query.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This Pull Request attempts to fix an issue where using `d}` in vim mode
would not delete all characters in case there's no blank lines at the
end of the buffer.
When calculating the end point for this motion, if there's no blank
lines at the end of the buffer, Zed was calculating it to be the last
character in the last line. However, if there's a newline at the end of
the buffer, it calculates the end point to be the point at the right of
the last character.
Here's an example, for the following buffer contents:
```
Hello!
Hello!
```
If the `d}` command is run at `(0, 0)`, the end point will be set to
`(1, 5)`. However, fi the same command is run for this buffer instead:
```
Hello!
Hello!
```
The end point will be set to `(1, 6)`, there's a 1 unit difference in
the column, which leads to all characters actually being deleted.
Closes#29393
Release Notes:
- Fixed deleting to the end of paragraph when there's no blank lines
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Taken from:
https://github.com/jeetsukumaran/vim-indentwise?tab=readme-ov-file#movements-by-relative-indent-depth
> [- : Move to previous line of lesser indent than the current line.
> [+ : Move to previous line of greater indent than the current line.
> [= : Move to previous line of same indent as the current line that is
separated from the current line by lines of different indents.
> ]- : Move to next line of lesser indent than the current line.
> ]+ : Move to next line of greater indent than the current line.
> ]= : Move to next line of same indent as the current line that is
separated from the current line by lines of different indents.
Release Notes:
- vim: Added indent-wise motions `] -/+/=`
Closes https://github.com/zed-industries/zed/issues/27619
Fixes issue with right wrapped movement when a multi-byte character is
at the end of the line. This is done by grabbing the last character on
the current row and using that characters size to calculate the
`max_column` variable, which is used to decide if the next right
movement should move down the line or not.
We did notice a bit of code that could be an issue that we wanted to
call out.
[Here](https://github.com/zed-industries/zed/blob/main/crates/editor/src/display_map.rs#L1070)
inside of `clip_at_line_end` it also does a saturating_sub(1), assuming
a single byte character. We didn't run into any issues due to this line
but felt like a similar bug. We can apply a similar fix if wanted to
pose the question first.
Test case: Moving to next line when eol is a multi-byte character
https://github.com/user-attachments/assets/1021ab1f-f49d-4986-8f9a-8cfc7e5c91bc
Release Notes:
- Fixed issue in vim forward spacing when a multi-byte character is at
the eol
---------
Co-authored-by: KyleBarton <kjbarton4@gmail.com>
Before this change we didn't explicitly handle vim's exclusive-linewise
edgecase
(https://neovim.io/doc/user/motion.html#exclusive).
Instead we had hard-coded workarounds in a few places to make our tests
pass.
The most pernicious of these workarounds was that we represented a
visual line
selection as including the trailing newline (or leading newline for
files that
end with no newline), which other code had to undo to get back to what
the user
indended.
Closes#21440
Updates #6900
Release Notes:
- vim: Fixed `d]}` to not delete the closing brace
- vim: Fixed `d}` from the start of the line to not delete the paragraph
separator
- vim: Fixed `d}` from the middle of the line to not delete the final
newline
Closes#26806
Changes: Clips the new point with `Bias::Right` like in
`saturating_right`
Release Notes:
- vim: Fixed `space` not handling non-ascii characters
Closes https://github.com/zed-industries/zed/issues/13111
Release Notes:
- vim: Added global marks `'[A-Z]`
- vim: Added persistence for global (and local) marks. When re-opening
the same workspace your previous marks will be available.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes https://github.com/zed-industries/zed/discussions/25665
> Currently Zed is missing quite an useful Vim motion: <count>% (go to
{count} percentage in the file).
Description:
{count}% - Go to {count} percentage in the file, on the first non-blank
in the line linewise. To compute the new line number this formula is
used: ({count} * number-of-lines + 99) / 100 .
> [Link](https://neovim.io/doc/user/motion.html#N%25).
Release Notes:
- vim: Added `<count>%` motion
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
https://github.com/zed-industries/zed/pull/25663#issuecomment-2686095807
Renamed the `vim::Backspace` and `vim::Space` actions to
`vim::WrappingLeft` and `vim::WrappingRight` respectively. The old names
are still available, but they are marked as deprecated and users are
advised to use the new names.
Also added a paragraph to the docs describing how to enable wrapping
cursor navigation.
Covers part of #5129 by adding `MoveToStartOfExcerpt`,
`MoveToEndOfExcerpt`, `SelectToStartOfExcerpt`, and
`SelectToEndOfExcerpt`.
No default linux bindings yet as it's unclear what to use. Currently,
`ctrl-up` / `ctrl-down` scroll up and down by one line (see #13269).
Considering changing the meaning of those.
Mac:
* Previously `cmd-up` and `cmd-down` were `editor::MoveToBeginning` and
`editor::MoveToEnd`. In singleton editors these will behave the same as
before. In multibuffers, they will now step through excerpts instead of
jumping to the beginning / end of the multibuffer.
* `cmd-home` and `cmd-end`, often typed as `cmd-fn-left` and
`cmd-fn-right` are now `editor::MoveToBeginning` and
`editor::MoveToEnd`. This is useful in multibuffers.
Release Notes:
- Mac: `cmd-up` now moves to the previous
multibuffer excerpt start, and `cmd-down` moves to the next multibuffer
excerpt end. Within normal buffers these behave the same as before, moving
to the beginning or end.
- [x] snake case keymap properties
- [x] flatten actions
- [x] keymap migration + notfication
- [x] settings migration + notification
- [x] inline completions -> edit predictions
### future:
- keymap notification doesn't show up on start up, only on keymap save.
this is existing bug in zed, will be addressed in seperate PR.
Release Notes:
- Added a notification for deprecated settings and keymaps, allowing you
to migrate them with a single click. A backup of your existing keymap
and settings will be created in your home directory.
- Modified some keymap actions and settings for consistency.
---------
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Closes#23877
Co-Authored-By: Ben <ben@zed.dev>
Co-Authored-By: Michael <michael@zed.dev>
Release Notes:
- vim: Fix navigating to end of line with inlay hints
---------
Co-authored-by: Ben <ben@zed.dev>
Co-authored-by: Michael <michael@zed.dev>
Lukas Wirth
Andrew Farkas
Piotr OsiewiczandSmit Barmase
Romans Malinovskis
Adam Mulvany
tidely
Michael Sloan
Julia Ryan
Ben Kunkle
Alex ShenandConrad Irwin
AidanV
Peter Finn
5brian
Asqar Arslanov
CharlesChen0823