This is a bit of a readability improvement IMHO; I often find myself
confused when dealing when dimension pairs, as there's no easy way to
jump to the implementation of a dimension for tuples to remind myself
for the n-th time how exactly that impl works. Now it should be possible
to jump directly to that impl.
Another bonus is that Dimension supports 3-ary tuples as well - by using
a () as a default value of a 3rd dimension.
Release Notes:
- N/A
This gets rid of the need to pass context to all cursor functions. In
practice context is always immutable when interacting with cursors.
A nicety of this is in the follow-up PR we will be able to implement
Iterator for all Cursors/filter cursors (hell, we may be able to get rid
of filter cursor altogether, as it is just a custom `filter` impl on
iterator trait).
Release Notes:
- N/A
This PR aims to improve the minimap performace. This is primarily
achieved by disabling/removing stuff that is not shown in the minimal as
well as by assuring the display map is not updated during minimap
prepaint.
This should already be much better in parts, as the block map as well as
the fold map will be less frequently updated due to the minimap
prepainting (optimally, they should never be, but I think we're not
quite there yet).
For this, I had to remove block rendering support for the minimap, which
is not as bad as it sounds: Practically, we were currently not rendering
most blocks anyway, there were issues due to this (e.g. scrolling any
visible block offscreen in the main editor causes scroll jumps
currently) and in the long run, the minimap will most likely need its
own block map or a different approach anyway. The existing
implementation caused resizes to occur very frequently for practically
no benefit. Can pull this out into a separate PR if requested, most
likely makes the other changes here easier to discuss.
This is WIP as we are still hitting some code path here we definitely
should not be hitting. E.g. there seems to be a rerender roughly every
second if the window is unfocused but visible which does not happen when
the minimap is disabled.
While this primarily focuses on the minimap, it also touches a few other
small parts not related to the minimap where I noticed we were doing too
much stuff during prepaint. Happy for any feedback there aswell.
Putting this up here already so we have a place to discuss the changes
early if needed.
Release Notes:
- Improved performance with the minimap enabled.
- Fixed an issue where interacting with blocks in the editor would
sometimes not properly work with the minimap enabled.
Closes https://github.com/zed-industries/zed/issues/33575
* Fixes inlay colors spoiled after document color displayed
* Optimizes the query pattern for large multi buffers
Release Notes:
- Fixed document colors issues with other inlays and multi buffers
https://github.com/user-attachments/assets/ad0fa304-e4fb-4598-877d-c02141f35d6f
Closes https://github.com/zed-industries/zed/issues/4678
Also adds the code to support `textDocument/colorPresentation`
counterpart that serves as a resolve mechanism for the document colors.
The resolve itself is not run though, and the editor does not
accommodate color presentations in the editor yet — until a well
described use case is provided.
Use `lsp_document_colors` editor settings to alter the presentation and
turn the feature off.
Release Notes:
- Start showing inline previews for LSP document colors
- [x] foreground highlights
- [x] background highlights
- [x] advertise support in DAP capabilities
Closes#31372
Release Notes:
- Debugger Beta: added basic support for highlighting in the console
based on ANSI escape codes.
Closes#31919
Release Notes:
- Fixed a panic that could sometimes occur when the agent panel was too
narrow and contained context included via `@`.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
* Adds a `diagnostics_max_severity: null` editor settings that has
previous hardcoded default, `warning`
* Make inline diagnostics to inherit this setting by default (can be
overridden with its own max_severity setting)
* Allows to toggle diagnostics in the editor menu and via new action,
`editor::ToggleDiagnostics`
Closes https://github.com/zed-industries/zed/issues/4686
Release Notes:
- N/A *or* Added/Fixed/Improved ...
## Overview
This PR adds the minimap feature to the Zed editor, closely following
the [design from Visual Studio
Code](https://code.visualstudio.com/docs/getstarted/userinterface#_minimap).
When configured, a second instance of the editor will appear to the left
of the scrollbar. This instance is not interactive and it has a slimmed
down set of annotations, but it is otherwise just a zoomed-out version
of the main editor instance. A thumb shows the line boundaries of the
main viewport, as well as the progress through the document. Clicking on
a section of code in the minimap will jump the editor to that code.
Dragging the thumb will act like the scrollbar, moving sequentially
through the document.
## New settings
This adds a `minimap` section to the editor settings with the following
keys:
### `show`
When to show the minimap in the editor.
This setting can take three values:
1. Show the minimap if the editor's scrollbar is visible: `"auto"`
2. Always show the minimap: `"always"`
3. Never show the minimap: `"never"` (default)
### `thumb`
When to show the minimap thumb.
This setting can take two values:
1. Show the minimap thumb if the mouse is over the minimap: `"hover"`
2. Always show the minimap thumb: `"always"` (default)
### `width`
The width of the minimap in pixels.
Default: `100`
### `font_size`
The font size of the minimap in pixels.
Default: `2`
## Providing feedback
In order to keep the PR focused on development updates, please use the
discussion thread for feature suggestions and usability feedback: #26894
## Features left to add
- [x] fix scrolling performance
- [x] user settings for enable/disable, width, text size, etc.
- [x] show overview of visible lines in minimap
- [x] clicking on minimap should navigate to the corresponding section
of code
- ~[ ] more prominent highlighting in the minimap editor~
- ~[ ] override scrollbar auto setting to always when minimap is set to
always show~
Release Notes:
- Added minimap for high-level overview and quick navigation of editor
contents.
---------
Co-authored-by: MrSubidubi <dev@bahn.sh>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Closes #ISSUE
Co-authored-by: Bennet <bennet@zed.dev>
Release Notes:
- Added support for context `@mentions` in the inline prompt editor and
when editing past messages in the agent panel.
---------
Co-authored-by: Bennet Bo Fenner <bennet@zed.dev>
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
This PR uses Tree Sitter to show inline values while a user is in a
debug session.
We went with Tree Sitter over the LSP Inline Values request because the
LSP request isn't widely supported. Tree Sitter is easy for
languages/extensions to add support to. Tree Sitter can compute the
inline values locally, so there's no need to add extra RPC messages for
Collab. Tree Sitter also gives Zed more control over how we want to show
variables.
There's still more work to be done after this PR, namely differentiating
between global/local scoped variables, but it's a great starting point
to start iteratively improving it.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Kirill <kirill@zed.dev>
A "Near" block acts similarly to a "Below" block, but can (if it's
height is <= one line height) be shown on the end of the preceding line
instead of adding an entire blank line to the editor.
You can test it out by pasting this into `go_to_diagnostic_impl` and
then press `F8`
```
let buffer = self.buffer.read(cx).snapshot(cx);
let selection = self.selections.newest_anchor();
self.display_map.update(cx, |display_map, cx| {
display_map.insert_blocks(
[BlockProperties {
placement: BlockPlacement::Near(selection.start),
height: Some(1),
style: BlockStyle::Flex,
render: Arc::new(|_| {
div()
.w(px(100.))
.h(px(16.))
.bg(gpui::hsla(0., 0., 1., 0.5))
.into_any_element()
}),
priority: 0,
}],
cx,
)
});
return;
```
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Previously, when comparing a block with an empty range to an empty query
range in non-inclusive mode, our binary search logic could end up
computing an inverted range, causing a panic.
This commit adds special casing when comparing empty blocks with empty
ranges.
cc @as-cii: I'm realizing that the approach to searching for the
intersecting replacement blocks makes some invalid assumptions about the
ordering of replace decorations. They aren't ordered at all by their end
range. @maxbrunsfeld and I are wondering if long term, we should remove
replace decorations and find another solution for folding buffers in
multi buffers.
Release Notes:
- Fixed an occasional panic that would occur when navigating to the next
change hunk with a pending inline transformation present.
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Release Notes:
- Fixed a rendering bug that caused context in the agent to not wrap
properly.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Zed AI <ai+claude-3.7@zed.dev>
This PR adds functionality for loading the diff for an arbitrary git
commit, and displaying it in a tab. To retrieve the diff for the commit,
I'm using a single `git cat-file --batch` invocation to efficiently load
both the old and new versions of each file that was changed in the
commit.
Todo
* Features
* [x] Open the commit view when clicking the most recent commit message
in the commit panel
* [x] Open the commit view when clicking a SHA in a git blame column
* [x] Open the commit view when clicking a SHA in a commit tooltip
* [x] Make it work over RPC
* [x] Allow buffer search in commit view
* [x] Command palette action to open the commit for the current blame
line
* Styling
* [x] Add a header that shows the author, timestamp, and the full commit
message
* [x] Remove stage/unstage buttons in commit view
* [x] Truncate the commit message in the tab
* Bugs
* [x] Dedup commit tabs within a pane
* [x] Add a tooltip to the tab
Release Notes:
- Added the ability to show past commits in Zed. You can view the most
recent commit by clicking its message in the commit panel. And when
viewing a git blame, you can show any commit by clicking its sha.
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
Release Notes:
- Multibuffers now use less vertical space for excerpt boundaries.
Additionally the expand up/down arrows are hidden at the start and end
of the buffers
---------
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Zed AI <claude-3.5-sonnet@zed.dev>
Closes#18157
Release Notes:
- vim: Added `:reg[isters]` to show the current values of registers
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Give the inline file crease inside of `assistant2`'s editor a
selection background when there is a selection over it
Release Notes:
- N/A
---------
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
This reverts commit 9ef0501853 due to a
panic.
```
{
"thread": "main",
"payload": "9 is not a valid char boundary in path \"crates/…/LiveKitBridge/\"",
"location_data": {
"file": "crates/file_finder/src/file_finder.rs",
"line": 646
}
}
```
Release Notes:
- N/A
Done automatically with
> ast-grep -p '$A.background_executor().spawn($B)' -r
'$A.background_spawn($B)' --update-all --globs "\!crates/gpui"
Followed by:
* `cargo fmt`
* Unexpected need to remove some trailing whitespace.
* Manually adding imports of `gpui::{AppContext as _}` which provides
`background_spawn`
* Added `AppContext as _` to existing use of `AppContext`
Release Notes:
- N/A
This PR makes progress on #7711 by identifying any common prefix of the
paths in the file finder's search results, and replacing the "interior"
of that prefix---every path segment but the first and last---with `...`,
when a heuristic indicates that the longest path would otherwise
overflow the modal.
The elision is not applied to any segment that contains a match for the
search query.
There may be more work to do on #7711 in the case of long result paths
that do not share a significant common prefix.
Release Notes:
- Improved display of long paths in the file finder modal
Co-authored-by: Max <max@zed.dev>
Lukas Wirth
Piotr Osiewicz
Michael Sloan
Finn Evers
Richard Feldman
Danilo Leal
Kirill Bulatov
Cole Miller
Conrad Irwin
Remco Smits
Nathan SoboandPeter Tripp
Max Brunsfeld
Mikayla Maki
AidanVandConrad Irwin
张小白andMikayla