This PR fixes an issue where `/` and `!` in Rust doc comments were being
incorrectly highlighted as operators after #17734.
We solve this by removing them from the operators list and using more
scoped queries to highlight them.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
This PR is the beginning of an evaluation framework for our AI features.
Right now, we're evaluating our semantic search feature against the
[CodeSearchNet](https://github.com/github/CodeSearchNet) code search
dataset. This dataset is very limited (for the most part, only 1 known
good search result per repo) but it has surfaced some problems with our
search already.
Release Notes:
- N/A
---------
Co-authored-by: Jason <jason@zed.dev>
Co-authored-by: Jason Mancuso <7891333+jvmncs@users.noreply.github.com>
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Richard <richard@zed.dev>
This PR fixes a panic when expanding an excerpt within a multibuffer
that could occur when the cursor was at the end of the buffer.
You can reproduce this by opening a multibuffer, putting your cursor at
the very end of that buffer, and then expanding the excerpt (Shift +
Enter).
Release Notes:
- Fixed a panic that could occur when expanding an excerpt within a
multibuffer when the cursor was at the end of the excerpt.
Co-authored-by: Antonio <antonio@zed.dev>
Closes#14100
Release Notes:
- Fixed unable to open file with a colon from Zed CLI
-----
I didn't make change to tests for the first two commits. I changed them
to easily find offending test cases. Behavior changes are in last commit
message.
In the last commit, I changed how `PathWithPosition` should intreprete
file paths. If my assumptions are off, please advise so that I can make
another approach.
I also believe further constraints would be better for
`PathWithPosition`'s intention. But people can make future improvements
to `PathWithPosition`.
Release Notes:
- Added a new `/delta` command to re-insert changed files that were
previously included in a context.
---------
Co-authored-by: Roy <roy@anthropic.com>
This fixes the regression introduced here:
https://github.com/zed-industries/zed/pull/17572#issuecomment-2355632615
Essentially: instead of always setting the value when saving settings,
we don't set it by default, but fall back to the default value if it's
not set.
That fixes Vim mode's cursor being overwritten when settings change.
Release Notes:
- N/A
I found tab switcher file icons to be missing. They were mentioned in
the [initial tab switcher
issue](https://github.com/zed-industries/zed/issues/7653), but left to
be added later (mentioned in
https://github.com/zed-industries/zed/pull/7987).
I also noticed that the project search icon went missing, but I'm not
sure if that's intentional. These changes re-introduce it, as it's
provided by the generic `tab_icon()` function.
There's a small difference between the terminal item and everything
else, because terminal's `tab_content` returns a slightly different
layout, which adds a little more space between the icon and text. I'll
look into resolving this withouth changing too much stuff around in the
terminal crate. If you have any ideas on how to do this well, please
comment.
The new `tab_switcher` config section only has a single boolean option -
`show_icons`. It toggles between icons and not icons, but doesn't
disable the terminal icon. Implementing this would probably also require
some refactoring in terminal's `tab_content` function.
Release Notes:
- Added file icons to the tab switcher
Screenshot:
Came across this code while investigating something else and I think we
should use the same method. As far as I know, it does the same thing,
except that `buffer_snapshot_for_lsp_version` also cleans up the stored
snapshots.
Release Notes:
- N/A
Release Notes:
- Add Python venv activation support for Windows and PowerShell
Additional:
I discovered a related bug on my Windows system. When first opening the
project, it fails to detect the virtual environment folder `.venv`.
After expanding the .venv folder in the Project Panel, it then becomes
able to detect the virtual environment folder. However, I don't know how
to fix it.
This is a follow-up to https://github.com/zed-industries/zed/pull/17885,
which is reverted and fixed in this PR.
This PR actually enables the behavior by default.
Release Notes:
- Changed `rust-analyzer` support to lookup `rust-analyzer` binaries by
default in `$PATH`. That changes the default value to something users
requested.
Appologies if this PR is off base, I'm still not super familiar with the
Zed codebase.
I was trying to integrate with
https://github.com/zed-industries/zed/pull/12940
and found it awkward to hook up global bindings to adjust the UI font
size due to the fact it takes a WindowContext. Looking at the API, it
seemed odd that it took a WindowContext, yet the editor font methods
take an AppContext.
I couldn't find a compelling reason for this to be tied to a
WindowContext, so I personally think it makes sense to switch it.
This does have a behavior change, which hopefully is actually desirable:
Currently, if you have two open and visible Zed windows, and trigger a
UI font adjustment in one, the non-active windows won't update. However,
once you switch focus to the second one it will snap to the new UI font
size. This is inconsistent with adjusting the editor font size, which
applies to all open windows immediately.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [rodio](https://redirect.github.com/RustAudio/rodio) | dependencies |
minor | `0.17.1` -> `0.19.0` |
---
### Release Notes
<details>
<summary>RustAudio/rodio (rodio)</summary>
###
[`v0.19.0`](https://redirect.github.com/RustAudio/rodio/blob/HEAD/CHANGELOG.md#Version-0190-2024-06-29)
[Compare
Source](https://redirect.github.com/RustAudio/rodio/compare/v0.18.1...v0.19.0)
##### Added
- Adds a new source `track_position`. It keeps track of duration since
the
beginning of the underlying source.
##### Fixed
- Mp4a with decodable tracks after undecodable tracks now play. This
matches
VLC's behaviour.
###
[`v0.18.1`](https://redirect.github.com/RustAudio/rodio/blob/HEAD/CHANGELOG.md#Version-0181-2024-05-23)
[Compare
Source](https://redirect.github.com/RustAudio/rodio/compare/v0.18.0...v0.18.1)
##### Fixed
- Seek no longer hangs if the sink is empty.
###
[`v0.18.0`](https://redirect.github.com/RustAudio/rodio/blob/HEAD/CHANGELOG.md#Version-0180-2024-05-05)
[Compare
Source](https://redirect.github.com/RustAudio/rodio/compare/v0.17.3...v0.18.0)
##### Changed
- `Source` trait is now also implemented for `Box<dyn Source>` and `&mut
Source`
- `fn new_vorbis` is now also available when the `symphonia-vorbis`
feature is enabled
##### Added
- Adds a new method `try_seek` to all sources. It returns either an
error or
seeks to the given position. A few sources are "unsupported" they return
the
error `Unsupported`.
- Adds `SpatialSink::clear()` bringing it in line with `Sink`
##### Fixed
- channel upscaling now follows the 'WAVEFORMATEXTENSIBLE' format and no
longer
repeats the last source channel on all extra output channels.
Stereo content playing on a 5.1 speaker set will now only use the front
left
and front right speaker instead of repeating the right sample on all
speakers
except the front left one.
- `mp3::is_mp3()` no longer changes the position in the stream when the
stream
is mp3
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC41OS4yIiwidXBkYXRlZEluVmVyIjoiMzguNTkuMiIsInRhcmdldEJyYW5jaCI6Im1haW4iLCJsYWJlbHMiOltdfQ==-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Updates the inline completion provider to return a completion proposal
which is then converted to a completion state. This completion proposal
includes more detailed information about which inlays specifically
should be rendered.
Release Notes:
- Added support for fill-in-the-middle style inline completions
Closes#15833
Related to [#12495
comment](https://github.com/zed-industries/zed/pull/12495#issuecomment-2328356125)
Destroying and recreating the Input context was the only way to reset
the IME but it's making the keyboard unresponsive sometimes due to a XIM
error.
The keyboard will still be unresponsive if you close your IME while
using zed, but I don't know how to fix this.
* Fixed preedit drawing for CJK
* Fixed unresponsive keyboard by properly implementing reset_ic in
`xim-rs`
Release Notes:
- N/A
This PR adds a rewrap command to the editor.
Executing this command will rewrap the text in the selection to the
maximum line width:
https://github.com/user-attachments/assets/69aa9428-17fd-4315-89f1-f354d0f5f459
If there isn't an active selection, the selection will be expanded to
contiguous text from the cursor's location.
Rewrapping only works in Markdown, Plain Text, and within comments for
any other language.
Release Notes:
- Added an `editor: rewrap` command for rewrapping text to the maximum
line width.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Bennet <bennet@zed.dev>
Release Notes:
- Fixed a performance problem that happened when using vim mode after
opening and closing many editors
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Nathan <nathan@zed.dev>
This PR marks the RunPod environment variables as optional in the
Kubernetes template so that we can deploy without them being present.
Collab is already accounting for their absence.
Release Notes:
- N/A
This is a highly and frequently requested change. Users are confused why
rust-analyzer isn't used if it's on their `$PATH`.
Previously I didn't enable this by default, because rust-analyzer would
complain about an "Unknown binary", like this
Unknown binary 'rust-analyzer' in official toolchain
'1.81-aarch64-apple-darwin'.\n
But turns out that only happens when you have installed rust-analyzer
via the rustup toolchain, it's in your `$PATH`, and the
`rust-toolchain.toml` of the repository doesn't mention it.
The fix is to delete `~/.cargo/bin/rust-analyzer` and, if preferred, use
`rust-analyzer` by installing the binary manually.
Release Notes:
- Changed rust-analyzer support to lookup `rust-analyzer` binaries by
default in `$PATH`. That changes the default value to something users
requested.
