Closes#26902
- We used to serialize SSH remote only when opened via recent entries,
and not on first time. This broke restore, when opening same folder for
second time from recent entries. Once opened for second time, restoring
used to. work correctly. This PR fixes this by serializing when opened
for first time.
- We didn't handle window replace post worktree creation in first time
flow, this resulted in project panel not opening automatically like it
does with recent entries, or local projects. This PR fixes it by
following same flow as recent entries.
Release Notes:
- Fixed SSH remote not restoring when opening for second time.
- Fixed project panel not opening when opening new SSH remote folder.
This PR fixes two bugs that cause unexpected behavior with breakpoints.
The first bug made it impossible to delete the last breakpoint in a file
in the workspace's database. This caused deleted breakpoints to remain
in the database and added to new projects.
The second bug was an edge case in the breakpoint context menu where
disabling/enabling a breakpoint would sometimes set a new breakpoint on
top of the old breakpoint.
Release Notes:
- N/A
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/11626
Part of https://github.com/zed-industries/zed/issues/12853
`"restore_on_file_reopen": true` in workspace settings can now be used
to enable and disable editor data between file reopens in the same pane:
https://github.com/user-attachments/assets/8d938ee1-d854-42a8-bbc3-2a4e4d7d5933
The settings are generic and panes' data store can be extended for
further entities, beyond editors.
---------------
Impl details:
Currently, the project entry IDs seem to be stable across file reopens,
unlike BufferIds, so those were used.
Originally, the DB data was considered over in-memory one as editors
serialize their state anyway, but managing and exposing PaneIds out of
the DB is quite tedious and joining the DB data otherwise is not
possible.
Release Notes:
- Started to restore editor state on reopen
Swift bindings BEGONE
Release Notes:
- Switched from using the Swift LiveKit bindings, to the Rust bindings,
fixing https://github.com/zed-industries/zed/issues/9396, a crash when
leaving a collaboration session, and making Zed easier to build.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Michael Sloan <michael@zed.dev>
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Part of #27171
Follows-up the change in
https://github.com/zed-industries/zed/pull/22346 to consider the case
where the assistant-panel is disabled via settings (as also noted in
[this
comment](https://github.com/zed-industries/zed/pull/22346#issuecomment-2558372412),
Notably, only the explicit case is considered here. Can extend this
change to also cover the implicit case where the button is disabled if
requested.).
Currently, if the user toggles the right dock, the assistant panel will
be shown even if it is disabled via settings, because it has the highest
priority (see
https://github.com/zed-industries/zed/pull/22346#issuecomment-2564890493).
With this change, the assistant panel is no longer activated when
disabled and the dock with the next highest activation order is
activated instead.
I did not opt in to make the priority configurabe, as I agree with
https://github.com/zed-industries/zed/pull/22346#issuecomment-2564890493
that this will most likely rarely be used (the active panel is only none
on the first toggle of the dock, afterwards it remains set for the
remainder of the session).
Release Notes:
- `workspace::ToggleRightDock` will no longer open the assistant panel
when it is disabled via settings.
Closes#4461
Take 2 on https://github.com/zed-industries/zed/pull/25040.
Fixes panic caused due to using `setHiddenUntilMouseMoves` return type
to `set` cursor on macOS.
Release Notes:
- Now cursor hides when the user is typing in editor. It will stay
hidden until it is moved again. This behavior is `true` by default, and
can be configured with `hide_mouse_while_typing` in settings.
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
Co-authored-by: Thomas Mickley-Doyle <thomas@zed.dev>
Co-authored-by: Agus <agus@zed.dev>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Angelk90 <angelo.k90@hotmail.it>
This fixes a rare bug where a breakpoint isn't saved in the database
when a user toggles a breakpoint and immediately exits out of zed.
Release Notes:
- N/A
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
This PR adds an action that clears all breakpoints and notifies any
active DAPs.
todo
- [x] Implement clear functionality
- [x] Write an integration test for this
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
The notifications from git output could take up variable amounts of
screen space, and they were quite obnoxious when a git command printed
lots of output, such as fetching many new branches or verbose push
hooks.
This change makes the push/pull/fetch buttons trigger a small
notification toast, based on the output of the command that was ran. For
errors or commands with more output the user may want to see, there's an
"Open Log" button which opens a new buffer with the output of that
command.
It also uses this behavior for long error notifications for other git
commands like `commit` and `checkout`. The output of those commands can
be quite long due to arbitrary githooks running.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This reduces the number of multibuffer syncs from 100,000 to 20,000.
Before this change each editor individually observed the project, so
literally any project change was amplified by the number of editors you
had open.
Now editors listen to their buffers instead of the project, and other
users of `cx.observe` on the project have been updated to use specific
events to reduce churn.
Follow up to #26237
Release Notes:
- Improved performance of Zed in large repos with lots of file system
events.
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Modified version of #25950. We still use worktree paths, but repo paths
with a status that lie outside the worktree are not excluded; instead,
we relativize them by adding `..`. This makes the list in the git panel
match what you'd get from running `git status` (with the repo's worktree
root as the working directory).
- [x] Implement + test new unrelativization logic
- [x] ~~When collecting repositories, dedup by .git abs path, so
worktrees can share a repo at the project level~~ dedup repos at the
repository selector layer, with repos coming from larger worktrees being
preferred
- [x] Open single-file worktree with diff when activating a path not in
the worktree
Release Notes:
- N/A
This reduces the number of multibuffer syncs when starting the editor
with 80
files open in the Zed repo from 10,000,000 to 100,000 by avoiding
O(n**2)
dirtyness checks.
Release Notes:
- Fixed a beachball when restarting in a large repo with a large number
open files
https://github.com/user-attachments/assets/b16e32e6-46c6-41dc-ab68-1824d288c8c2
This PR adds the first part of our planned extended notification system:
StatusToasts.
It also makes various updates to ComponentPreview and adds a `Styled`
extension in `ui::style::animation` to make it easier to animate styled
elements.
_**Note**: We will be very, very selective with what elements are
allowed to be animated in Zed. Assume PRs adding animation to elements
will all need to be manually signed off on by a designer._
## Status Toast
These are designed to be used for notifying about things that don't
require an action to be taken or don't need to be triaged. They are
designed to be ignorable, and dismiss themselves automatically after a
set time.
They can optionally include a single action.
Example: When the user enables Vim Mode, that action might let them undo
enabling it.
Status Toasts should _not_ be used when an action is required, or for
any binary choice.
If the user must provide some input, this isn't the right component!
### Out of scope
- Toasts should fade over a short time (like AnimationDuration::Fast or
Instant) when dismissed
- We should visually show when the toast will dismiss. We'll need to
pipe the `duration_remaining` from the toast layer -> ActiveToast to do
this.
- Dismiss any active toast if another notification kind is created, like
a Notification or Alert.
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
This PR adds toasts for reporting success and errors from remote git
operations. This PR also adds a focus handle to notifications, in
anticipation of making them keyboard accessible.
Release Notes:
- N/A
---------
Co-authored-by: julia <julia@zed.dev>
This PR fixes a bug where using the project diff editor to restore hunks
from a file that's not open in its own buffer would cause those reverts
to be lost once the project diff drops its excerpts for that file.
The fix is to save the buffers after restoring them but before the
excerpts are (potentially) dropped. This is done for the project diff
editor only. If we fail to save the affected files, we add their buffers
to the active workspace, so that the reverted contents are preserved and
the user can try again to save them.
- [x] Get it working
- [x] Test
- [ ] ~~Clean up boolean soup~~
Co-authored-by: Max <max@zed.dev>
Release Notes:
- N/A
Closes#7145
Currently, terminal persistence is global, i.e. split configurations are
restored across all workspaces.
This PR changes it to per-workspace, so configurations are restored only
within the same workspace. Opening a new window will start with a fresh
terminal.
https://github.com/user-attachments/assets/d43fe747-9f28-4723-b409-e8dbb3a23912
Release Notes:
- Improved terminal reopening to be per workspace instead of global.
Release Notes:
- Added an `on_last_window_closed` setting, that allows users to quit
the app when the last window is closed
---------
Co-authored-by: Richard <richard@zed.dev>
This reverts commit 9ef0501853 due to a
panic.
```
{
"thread": "main",
"payload": "9 is not a valid char boundary in path \"crates/…/LiveKitBridge/\"",
"location_data": {
"file": "crates/file_finder/src/file_finder.rs",
"line": 646
}
}
```
Release Notes:
- N/A
Done automatically with
> ast-grep -p '$A.background_executor().spawn($B)' -r
'$A.background_spawn($B)' --update-all --globs "\!crates/gpui"
Followed by:
* `cargo fmt`
* Unexpected need to remove some trailing whitespace.
* Manually adding imports of `gpui::{AppContext as _}` which provides
`background_spawn`
* Added `AppContext as _` to existing use of `AppContext`
Release Notes:
- N/A
This PR makes progress on #7711 by identifying any common prefix of the
paths in the file finder's search results, and replacing the "interior"
of that prefix---every path segment but the first and last---with `...`,
when a heuristic indicates that the longest path would otherwise
overflow the modal.
The elision is not applied to any segment that contains a match for the
search query.
There may be more work to do on #7711 in the case of long result paths
that do not share a significant common prefix.
Release Notes:
- Improved display of long paths in the file finder modal
Co-authored-by: Max <max@zed.dev>
Follow-up of https://github.com/zed-industries/zed/pull/24307
Brings back the PR and fixes the issue with the git status not
propagated, if computed too slow.
Now, git repo update
* waits in the background for all `scan_dir` repo status updates and
triggers another status update send afterwards
* ensures that the update sent is reported correctly (`scanning = true`)
if either FS or status scan is running still
* during worktree's git statuses updates, bumps `status_scan_id` to
ensure the repo update is reported to all subscribers
Release Notes:
- Improved project panel's speed in large projects
I spent an hour with @marcospb19 this morning debugging an issue with
adding `Copy Path` and `Copy Relative Path` actions to the editor
context menu. Turned out that the problem was using
`workspace::CopyPath` in the menu and `editor::CopyPath` in the action
handler.
This is an easy mistake to make, so let's fix it for everyone.
Release Notes:
- N/A
Supercedes #24561Closes#21059
Before this change we would skip saving multibuffers regardless of the
save intent. Now we correctly save them.
Along the way:
* Prompt to save when closing the last singleton copy of an item (even
if it's still open in a multibuffer).
* Update our file name prompt to pull out dirty project items from
multibuffers instead of counting multibuffers as untitled files.
* Fix our prompt test helpers to require passing the button name instead
of the index. A few tests were passing invalid responses to save
prompts.
* Refactor the code a bit to hopefully clarify it for the next bug.
Release Notes:
- Fixed edge-cases when closing multiple items including multibuffers.
Previously no prompt was generated when closing an item that was open in
a multibuffer, now you will be prompted.
- vim: Fix :wq in a multibuffer
Closes#10232
Context:
We have three ways to open files or dirs in Zed: `zed`, `zed --new`, and
`zed --add`. `--new` forces the project to open in a new window, while
`--add` forces it to open in an existing window (even if the dir isn’t a
subdir of an existing project or the file isn’t part of it).
Using just `zed` tries to open it in an existing window based on similar
logic of `--add`, but if no related project is found the dir, opens in a
new window.
Problem:
Right now, subdirs that are part of an existing project open in the
existing window when using `zed`. By default, subdirs should open in a
new window instead. If someone wants to open it in the existing window,
they can explicitly use `--add`. After this PR, only root dir and files
will focus on existing window, when `zed ` is used.
Fix:
For the `zed` case, we’ve filtered out subdirs in the logic that assigns
them to an existing window.
Release Notes:
- Fixed an issue where subdirectories of an already opened project, when
opened via the terminal, would open in the existing project instead of a
new window.
This PR adds support for configuring both a light and dark icon theme in
`settings.json`.
In addition to accepting just an icon theme name, the `icon_theme` field
now also accepts an object in the following form:
```jsonc
{
"icon_theme": {
"mode": "system",
"light": "Zed (Default)",
"dark": "Zed (Default)"
}
}
```
Both `light` and `dark` are required, and indicate which icon theme
should be used when the system is in light mode and dark mode,
respectively.
The `mode` field is optional and indicates which icon theme should be
used:
- `"system"` - Use the icon theme that corresponds to the system's
appearance.
- `"light"` - Use the icon theme indicated by the `light` field.
- `"dark"` - Use the icon theme indicated by the `dark` field.
Closes https://github.com/zed-industries/zed/issues/24695.
Release Notes:
- Added support for configuring both a light and dark icon theme and
switching between them based on system preference.
This PR formalizes design components with the Component and
ComponentPreview traits.
You can open the preview UI with `workspace: open component preview`.
Component previews no longer need to return `Self` allowing for more
complex previews, and previews of components like `ui::Tooltip` that
supplement other components rather than are rendered by default.
`cargo-machete` incorrectly identifies `linkme` as an unused dep on
crates that have components deriving `IntoComponent`, so you may need to
add this to that crate's `Cargo.toml`:
```toml
# cargo-machete doesn't understand that linkme is used in the component macro
[package.metadata.cargo-machete]
ignored = ["linkme"]
```
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes#22247
- [x] Do not close pinned tab on keyboard shortcuts like `ctrl+w` or
`alt+f4`
- [x] Close pinned tab on context menu action, menu bar action, or vim
bang
- [x] While closing pinned tab via shortcut (where it won't close),
instead activate any other non-pinned tab in same pane
- [x] Else, if any other pane contains non-pinned tab, activate that
- [x] Tests
Co-authored-by: uncenter <47499684+uncenter@users.noreply.github.com>
Release Notes:
- Pinned tab now stay open when using close shortcuts, auto focuses to
any other non-pinned tab instead.
- [x] snake case keymap properties
- [x] flatten actions
- [x] keymap migration + notfication
- [x] settings migration + notification
- [x] inline completions -> edit predictions
### future:
- keymap notification doesn't show up on start up, only on keymap save.
this is existing bug in zed, will be addressed in seperate PR.
Release Notes:
- Added a notification for deprecated settings and keymaps, allowing you
to migrate them with a single click. A backup of your existing keymap
and settings will be created in your home directory.
- Modified some keymap actions and settings for consistency.
---------
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
- Adds the `panel` crate for defining UI shared between panels, like
common button and header designs, etc
- Starts to update the git ui to be more consistent with other panels
Release Notes:
- N/A
This PR makes adding icons to the primary and secondary actions, in the
`MessageNotification` component, optional. Also took the opportunity to
remove a probably unnecessary "third action" from it; streamlining the
component API (we had added that for a design that we're not using
anymore). I did keep the "more info" possibility, which may be useful in
the future, though.
Release Notes:
- N/A
I believe this takes care of the remaining events running through the
old flow that requires transformation at the collab server level. I
think all events are now going through `telemetry::event!()`.
For anyone curious where the new telemetry names are coming from, you
can check the `for_snowflake` function within
`crates/collab/src/api/events.rs`, to see how collab is currently
transforming the events going through the old flow.
Release Notes:
- N/A
Closes#23334
This does not follow the exact way that windows are resized in vim.
Normally the command is `ctrl-w >` however this PR uses just `ctrl->`.
This is because I could not find a good way to read in a count like `10
ctrl-w ctrl->`. This is not really a problem since `ctrl->` can be held
down, which, in my opinion, speeds up resizing. I think this is a good
compromise since it improves usability; however, I am concerned that
this is not intuitive. I am looking forward to feedback.
Release Notes:
- Added the following commands
- vim::ResizeLeftDock
- vim::ResizeRightDock
- vim::ResizeBottomDock
- Added keybinds
- `ctrl->` for widening left dock
- `ctrl-<` for narrowing left dock
Smit Barmase
Anthony Eid
Piotr Osiewicz
Kirill Bulatov
Finn Evers
CharlesChen0823andConrad Irwin
Julia RyanandMikayla Maki
Cole Miller
Nate ButlerandCole Miller
smit
Danilo Leal
Joseph T. Lyons
AidanV