Address an issue where, in Vim mode, clicking past the end of a line
after selecting the entire line would place the cursor on the newline
character instead of the last character of the line, which is
inconsistent with Vim's normal mode expectations.
I believe the root cause was that the cursor’s position was updated to
the end of the line before the mode switch from Visual to Normal, at
which point `DisplayMap.clip_at_line_ends` was still set to `false`. As
a result, the cursor could end up in an invalid position for Normal
mode. The fix ensures that when switching between these two modes, and
if the selection is empty, the selection point is properly clipped,
preventing the cursor from being placed past the end of the line.
Related #38049
Release Notes:
- Fixed issue in Vim mode where switching from any mode to normal mode
could end up with the cursor in the newline character
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
When we refactored settings to not pass JSON blobs around, we ended up
needing
to write *a lot* of code that just merged things (like json merge used
to do).
Use a derive macro to prevent typos in this logic.
Release Notes:
- N/A
Co-Authored-By: Ben K <ben@zed.dev>
Co-Authored-By: Anthony <anthony@zed.dev>
Co-Authored-By: Mikayla <mikayla@zed.dev>
Release Notes:
- settings: Major internal changes to settings. The primary user-facing
effect is that some settings which did not make sense in project
settings files are no-longer read from there. (For example the inline
blame settings)
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Anthony <anthony@zed.dev>
serde 1.0.221 introduced serde_core into the build graph, which should
render explicitly depending on serde_derive for faster build times an
obsolote method.
Besides, I'm not even sure if that worked for us. My hunch is that at
least one of our deps would have `serde` with derive feature enabled..
and then, most of the crates using `serde_derive` explicitly were also
depending on gpui, which depended on `serde`.. thus, we wouldn't have
gained anything from explicit dep on `serde_derive`
Release Notes:
- N/A
Please credit @eliaperantoni, for the original PR (#34136).
Merge after (#34060) to avoid conflicts.
Closes https://github.com/zed-industries/zed/issues/33838
Closes https://github.com/zed-industries/zed/issues/33906
Release Notes:
- Helix will no longer sometimes fall out into "normal" mode, will
remain in "helix normal" (example: vv)
- Added dedicated "helix select" mode that can be targeted by
keybindings
Known issues:
- [ ] Helix motion, especially surround-add will not properly work in
visual mode, as it won't call `helix_move_cursor`. It is possible
however to respect self.mode in change_selection now.
- [ ] Some operations, such as `Ctrl+A` (increment) or `>` (indent) will
collapse selection also. I haven't found a way to avoid it.
---------
Co-authored-by: fantacell <ghub@giggo.de>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This is an implementation of matching like "m i (", as well as "] (" and
"[ (" in `helix_mode` with a few supported objects and a basis for more.
Release Notes:
- Added helix operators for selecting text objects
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR separates out the associated constant `KEY` from the `Settings`
trait into a new trait `SettingsKey`. This allows for the key trait to
be derived using attributes to specify the path so that the new
`SettingsUi` derive macro can use the same attributes to determine top
level settings paths thereby removing the need to duplicate the path in
both `Settings::KEY` and `#[settings_ui(path = "...")]`
Co-authored-by: Ben Kunkle <ben@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Closes #ISSUE
Initially, the `SettingsUi` trait was tied to `Settings`, however, given
that the `Settings::FileContent` type (which may be the same as the type
that implements `Settings`) will be the type that more directly maps to
the JSON structure (and therefore have the documentation, correct field
names (or `serde` rename attributes), etc) it makes more sense to have
the deriving of `SettingsUi` occur on the `FileContent` type rather than
the `Settings` type.
In order for this to work a relatively important change had to be made
to the derive macro, that being that it now "unwraps" options into their
inner type, so a field with type `Option<Foo>` where `Foo: SettingsUi`
will treat the field as if it were just `Foo`, expecting there to be a
default set in `default.json`. This imposes some restrictions on what
`Settings::FileContent` can be as seen in 1e19398 where `FileContent`
itself can't be optional without manually implementing `SettingsUi`, as
well as introducing some risk that if the `FileContent` type has
`serde(default)`, the default value will override the default value from
`default.json` in the UI even though it may differ (but it should!).
A future PR should probably replace the other settings with `FileContent
= Option<T>` (all of which currently have `T == bool`) with wrapper
structs and have `KEY = None` so the further niceties
`derive(SettingsUi)` will provide such as path renaming, custom UI, auto
naming and doc comment extraction can be used.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
## Goal
This PR creates the initial settings ui structure with the primary goal
of making a settings UI that is
- Comprehensive: All settings are available through the UI
- Correct: Easy to understand the underlying JSON file from the UI
- Intuitive
- Easy to implement per setting so that UI is not a hindrance to future
settings changes
### Structure
The overall structure is settings layer -> data layer -> ui layer.
The settings layer is the pre-existing settings definitions, that
implement the `Settings` trait. The data layer is constructed from
settings primarily through the `SettingsUi` trait, and it's associated
derive macro. The data layer tracks the grouping of the settings, the
json path of the settings, and a data representation of how to render
the controls for the setting in the UI, that is either a marker value
for the component to use (avoiding a dependency on the `ui` crate) or a
custom render function.
Abstracting the data layer from the ui layer allows crates depending on
`settings` to implement their own UI without having to add additional UI
dependencies, thus avoiding circular dependencies. In cases where custom
UI is desired, and a creating a custom render function in the same crate
is infeasible due to circular dependencies, the current solution is to
implement a marker for the component in the `settings` crate, and then
handle the rendering of that component in `settings_ui`.
### Foundation
This PR creates a macro and a trait both called `SettingsUi`. The
`SettingsUi` trait is added as a new trait bound on the `Settings`
trait, this allows the type system to guarantee that all settings
implement UI functionality. The macro is used to derived the trait for
most types, and can be modified through attributes for unique cases as
well.
A derive-macro is used to generate the settings UI trait impl, allowing
it the UI generation to be generated from the static information in our
code base (`default.json`, Struct/Enum names, field names, `serde`
attributes, etc). This allows the UI to be auto-generated for the most
part, and ensures consistency across the UI.
#### Immediate Follow ups
- Add a new `SettingsPath` trait that will be a trait bound on
`SettingsUi` and `Settings`
- This trait will replace the `Settings::key` value to enable
`SettingsUi` to infer the json path of it's derived type
- Figure out how to render `Option<T> where T: SettingsUi` correctly
- Handle `serde` attributes in the `SettingsUi` proc macro to correctly
get json path from a type's field and identity
Release Notes:
- N/A
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
This removes around 900 unnecessary clones, ranging from cloning a few
ints all the way to large data structures and images.
A lot of these were fixed using `cargo clippy --fix --workspace
--all-targets`, however it often breaks other lints and needs to be run
again. This was then followed up with some manual fixing.
I understand this is a large diff, but all the changes are pretty
trivial. Rust is doing some heavy lifting here for us. Once I get it up
to speed with main, I'd appreciate this getting merged rather sooner
than later.
Release Notes:
- N/A
The Zed Plex fonts were found to violate the OFL by using the word Plex
in the name.
Lilex has better ligatures and box-drawing characters than Zed Plex
Mono, but Zed Plex Sans should be identical
to IBM Plex Sans.
Closes#15542Closeszed-industries/zed-fonts#31
Release Notes:
- The "Zed Plex Sans" and "Zed Plex Mono" fonts have been replaced with
"IBM Plex Sans" and "Lilex". The old names still work for backward
compatibility. Other than fixing line-drawing characters, and improving
the ligatures, there should be little visual change as the fonts are all
of the same family.
- Introduced ".ZedSans" and ".ZedMono" as aliases to allow us to easily
change the default fonts in the future. These currently default to "IBM
Plex Sans" and "Lilex" respectively.
Closes https://github.com/zed-industries/zed/issues/33076
Release Notes:
- Fixed replace command on helix mode: now it actually replaces what was
selected and keeps the replaced text selected to better match helix
Closes#14760
Still TODO:
* Vim actually undoes *many* changes if they're all on the same line.
Release Notes:
- vim: Add `U` to return to the last changed line and undo
Closes #ISSUE
Adds a new `documentation` method to actions, that is extracted from doc
comments when using the `actions!` or derive macros.
Additionally, this PR adds doc comments to as many action definitions in
Zed as possible.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
Closes #ISSUE
Release Notes:
- N/A
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
In helix the `f`, `F`, `t`, `T`, left and right motions wrap lines. I
added that by default.
Release Notes:
- vim: The `use_multiline_find` setting is replaced by binding to the
correct action in the keymap:
```
"f": ["vim::PushFindForward", { "before": false, "multiline": true }],
"t": ["vim::PushFindForward", { "before": true, "multiline": true }],
"shift-f": ["vim::PushFindBackward", { "after": false, "multiline": true
}],
"shift-t": ["vim::PushFindBackward", { "after": true, "multiline": true
}],
```
- helix: `f`/`t`/`shift-f`/`shift-t`/`h`/`l`/`left`/`right` are now
multiline by default (like helix)
Instead of a menagerie of macros for implementing `Action`, now there
are just two:
* `actions!(editor, [MoveLeft, MoveRight])`
* `#[derive(..., Action)]` with `#[action(namespace = editor)]`
In both contexts, `///` doc comments can be provided and will be used in
`JsonSchema`.
In both contexts, parameters can provided in `#[action(...)]`:
- `namespace = some_namespace` sets the namespace. In Zed this is
required.
- `name = "ActionName"` overrides the action's name. This must not
contain "::".
- `no_json` causes the `build` method to always error and
`action_json_schema` to return `None`
and allows actions not implement `serde::Serialize` and
`schemars::JsonSchema`.
- `no_register` skips registering the action. This is useful for
implementing the `Action` trait
while not supporting invocation by name or JSON deserialization.
- `deprecated_aliases = ["editor::SomeAction"]` specifies deprecated old
names for the action.
These action names should *not* correspond to any actions that are
registered. These old names
can then still be used to refer to invoke this action. In Zed, the
keymap JSON schema will
accept these old names and provide warnings.
- `deprecated = "Message about why this action is deprecation"`
specifies a deprecation message.
In Zed, the keymap JSON schema will cause this to be displayed as a
warning. This is a new feature.
Also makes the following changes since this seems like a good time to
make breaking changes:
* In `zed.rs` tests adds a test with an explicit list of namespaces. The
rationale for this is that there is otherwise no checking of `namespace
= ...` attributes.
* `Action::debug_name` renamed to `name_for_type`, since its only
difference with `name` was that it
* `Action::name` now returns `&'static str` instead of `&str` to match
the return of `name_for_type`. This makes the action trait more limited,
but the code was already assuming that `name_for_type` is the same as
`name`, and it requires `&'static`. So really this just makes the trait
harder to misuse.
* Various action reflection methods now use `&'static str` instead of
`SharedString`.
Release Notes:
- N/A
Closes#31728
This PR introduced new setting `"helix_mode"`. Enabling which will
enable the `vim_mode` along with `helix` behavior.
This solves issue where `vim`'s `default_mode` was being used to switch
between mode instead of opening in `default_mode`.
When `helix_mode` is enabled switcing to `Normal mode` will now switch
to `HelixNormal`
Release Notes:
- Fixed - escape key not switching to normal mode when default_mode is
insert
- Added - `helix_mode` setting to enable/disable helix key bindings
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#32787
Follow-up to #27519 and #32408
This PR fixes an issue where the mouse cursor would stay hidden after
typing in the editor.
Before #32408, we would rerender the editor on every mouse move. Now, we
(correctly) only do this if a rerender is actually required. This caused
a small regression for hiding the mouse cursor though: Due to the view
now being cached, we do not neccessarily update the mouse cursor style
so it is shown again. The boolean is updated but the view is not,
resulting in the cursor style being kept until another action is
performed. This is an issue with both Stable and Preview (due to some
other changes, the issue is slightly worse on Preview though, see
https://github.com/zed-industries/zed/pull/32596#issuecomment-2969258800
and
https://github.com/zed-industries/zed/pull/32596#issuecomment-2969357248
for some more context).
This PR ensures that the cursor is shown again by scheduling a redraw of
the editor whenever the boolean is updated.
The change should not cause any performance regressions: In most cases
where we want to hide the mouse, the editor is about to be rerendered
anyway, hence this would not change anything. For cases where we want to
show the cursor again, this ensures that we actually end up doing so by
rerendering the editor once.
Release Notes:
- Fixed an issue where the mouse cursor would sometimes stay hidden
after typing in editors with the `hide_mouse` setting enabled.
Follow-up for https://github.com/zed-industries/zed/pull/30671
Now, when clicking on an existing selection, the cursor will change on
`mouse_up` when `drag_and_drop_selection` is `true`. When
`drag_and_drop_selection` is `false`, it will change on `mouse_down`
(previous default).
Release Notes:
- N/A
Closes#4958
Release Notes:
- Added support for drag and drop text selection. It can be disabled by
setting `drag_and_drop_selection` to `false`.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
## Overview
This PR adds the minimap feature to the Zed editor, closely following
the [design from Visual Studio
Code](https://code.visualstudio.com/docs/getstarted/userinterface#_minimap).
When configured, a second instance of the editor will appear to the left
of the scrollbar. This instance is not interactive and it has a slimmed
down set of annotations, but it is otherwise just a zoomed-out version
of the main editor instance. A thumb shows the line boundaries of the
main viewport, as well as the progress through the document. Clicking on
a section of code in the minimap will jump the editor to that code.
Dragging the thumb will act like the scrollbar, moving sequentially
through the document.
## New settings
This adds a `minimap` section to the editor settings with the following
keys:
### `show`
When to show the minimap in the editor.
This setting can take three values:
1. Show the minimap if the editor's scrollbar is visible: `"auto"`
2. Always show the minimap: `"always"`
3. Never show the minimap: `"never"` (default)
### `thumb`
When to show the minimap thumb.
This setting can take two values:
1. Show the minimap thumb if the mouse is over the minimap: `"hover"`
2. Always show the minimap thumb: `"always"` (default)
### `width`
The width of the minimap in pixels.
Default: `100`
### `font_size`
The font size of the minimap in pixels.
Default: `2`
## Providing feedback
In order to keep the PR focused on development updates, please use the
discussion thread for feature suggestions and usability feedback: #26894
## Features left to add
- [x] fix scrolling performance
- [x] user settings for enable/disable, width, text size, etc.
- [x] show overview of visible lines in minimap
- [x] clicking on minimap should navigate to the corresponding section
of code
- ~[ ] more prominent highlighting in the minimap editor~
- ~[ ] override scrollbar auto setting to always when minimap is set to
always show~
Release Notes:
- Added minimap for high-level overview and quick navigation of editor
contents.
---------
Co-authored-by: MrSubidubi <dev@bahn.sh>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Nathan here: I also tacked on a bunch of UI refinement.
Release Notes:
- Introduced the ability to follow the agent around as it reads and
edits files.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Things this doesn't currently handle:
- [x] ~testing~
- ~we really need an snapshot test that takes a vscode settings file
with all options that we support, and verifies the zed settings file you
get from importing it, both from an empty starting file or one with lots
of conflicts. that way we can open said vscode settings file in vscode
to ensure that those options all still exist in the future.~
- Discussed this, we don't think this will meaningfully protect us from
future failures, and we will just do this as a manual validation step
before merging this PR. Any imports that have meaningfully complex
translation steps should still be tested.
- [x] confirmation (right now it just clobbers your settings file
silently)
- it'd be really cool if we could show a diff multibuffer of your
current settings with the result of the vscode import and let you pick
"hunks" to keep, but that's probably too much effort for this feature,
especially given that we expect most of the people using it to have an
empty/barebones zed config when they run the import.
- [x] ~UI in the "welcome" page~
- we're planning on redoing our welcome/walkthrough experience anyways,
but in the meantime it'd be nice to conditionally show a button there if
we see a user level vscode config
- we'll add it to the UI when we land the new walkthrough experience,
for now it'll be accessible through the action
- [ ] project-specific settings
- handling translation of `.vscode/settings.json` or `.code-workspace`
settings to `.zed/settings.json` will come in a future PR, along with UI
to prompt the user for those actions when opening a project with local
vscode settings for the first time
- [ ] extension settings
- we probably want to do a best-effort pass of popular extensions like
vim and git lens
- it's also possible to look for installed/enabled extensions with `code
--list-extensions`, but we'd have to maintain some sort of mapping of
those to our settings and/or extensions
- [ ] LSP settings
- these are tricky without access to the json schemas for various
language server extensions. we could probably manage to do translations
for a couple popular languages and avoid solving it in the general case.
- [ ] platform specific settings (`[macos].blah`)
- this is blocked on #16392 which I'm hoping to address soon
- [ ] language specific settings (`[rust].foo`)
- totally doable, just haven't gotten to it yet
~We may want to put this behind some kind of flag and/or not land it
until some of the above issues are addressed, given that we expect
people to only run this importer once there's an incentive to get it
right the first time. Maybe we land it alongside a keymap importer so
you don't have to go through separate imports for those?~
We are gonna land this as-is, all these unchecked items at the bottom
will be addressed in followup PRs, so maybe don't run the importer for
now if you have a large and complex VsCode settings file you'd like to
import.
Release Notes:
- Added a VSCode settings importer, available via a
`zed::ImportVsCodeSettings` action
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Closes#4495
Release Notes:
- vim: add cursor shape settings for each vim mode
---
Add cursor shape settings for each vim mode to enable users to specify
them.
Example of `settings.json`:
```json
{
"vim_mode": true,
"vim": {
"cursor_shape": {
"normal": "hollow",
"insert": "bar",
"replace": "block",
"visual": "underline"
}
}
}
```
After this change is applied,
- The cursor shape specified by the user for each mode is used.
- In insert mode, the `vim > cursor_shape > insert` setting takes
precedence over the primary `cursor_shape` setting.
- If `vim > cursor_shape > insert` is not set, the primary
`cursor_shape` will be used in insert mode.
- The cursor shape will remain unchanged before and after this update
when the user does not set the `vim > cursor_shape` setting.
Video:
[screen-record.webm](https://github.com/user-attachments/assets/b87461a1-6b3a-4a77-a607-a340f106def5)
Closes https://github.com/zed-industries/zed/issues/19731
Adds `editor::GoToPreviousChange` and `editor::GoToNextChange` that work
the same as `vim::ChangeListOlder` and `vim::ChangeListNewer` as the
common logic was extracted and reused.
Release Notes:
- Added a way to navigate between changes with
`editor::GoToPreviousChange` and `editor::GoToNextChange`
This PR lightly refactors the `EditorMode::Full` exposing two new
methods: `is_full` and `set_mode`.
Motivation is to expose fields that modify the behavior when the editor
is in `Full` mode. By using is `mode.is_full()` instead of
`EditorMode::Full` we can introduce new fields without breaking other
places in the code.
Release Notes:
- N/A
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
This brings in a bunch of helix bindings (many of them from
infogulch/zed-helix-keymap) and implements helix-style delete.
Release Notes:
- vim: Expanded default helix-style keybindings in HelixNormal mode
Closes#22398
Release Notes:
- vim: Adds `'` and `"` marks (last location jumped from in the current
buffer, and location when last exiting a buffer)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#26884
Release Notes:
- vim: Added `:marks` which brings up list of current marks
- confirming on selected mark in the view jumps to that mark
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes https://github.com/zed-industries/zed/issues/13111
Release Notes:
- vim: Added global marks `'[A-Z]`
- vim: Added persistence for global (and local) marks. When re-opening
the same workspace your previous marks will be available.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#18157
Release Notes:
- vim: Added `:reg[isters]` to show the current values of registers
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
