This PR makes it so we attach the value from the `User-Agent` header to
the `handle connection` span.
We'll start sending this header in
https://github.com/zed-industries/zed/pull/35280.
Release Notes:
- N/A
Instead of selecting a screen to share arbitrarily, we'll now allow user
to select the screen to share. Note that sharing multiple screens at the
time is still not supported (though prolly not too far-fetched).
Related to #4666
Release Notes:
- Added screen selector dropdown to screen share button
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Cole Miller <cole@zed.dev>
This is following feedback from folks that were searching the "close
others" action, available in the tab's context menu, and not finding it
because it was actually named "close inactive", which was confusing. So,
this PR makes sure the tab's menu item and the action have consistent
naming.
Release Notes:
- Rename "CloseInactiveItems" action to "CloseOtherItems" for naming
consistency.
Closes https://github.com/zed-industries/zed/issues/33980
Closes https://github.com/zed-industries/zed/discussions/33979
- Switches to the debounce task pattern for diagnostic summary
computations, which most importantly lets us do them only once when a
large number of DiagnosticUpdated events are received at once.
- Makes workspace diagnostic requests not time out if a partial result
is received.
- Makes diagnostics from workspace diagnostic partial results get
merged.
There might be some related areas where we're not fully complying with
the LSP spec but they may be outside the scope of what this PR should
include.
Release Notes:
- Added support for streaming LSP workspace diagnostics.
- Fixed editor freeze from large LSP workspace diagnostic responses.
Closes#33445
Fixed the "Close others" context menu action to close tabs relative to
the right-clicked tab instead of the currently active tab. Previously,
when right-clicking on an inactive tab and selecting "Close others", it
would keep the active tab open rather than the right-clicked tab.
## Before/After
https://github.com/user-attachments/assets/d76854c3-c490-4a41-8166-309dec26ba8a
## Changes
- Modified `close_inactive_items()` method to accept an optional
`target_item_id` parameter
- Updated context menu handler to pass the right-clicked tab's ID as the
target
- Maintained backward compatibility by defaulting to active tab when no
target is specified
- Updated all existing call sites to pass `None` for the new parameter
Release Notes:
- Fixed: "Close others" context menu action now correctly keeps the
right-clicked tab open instead of the active tab
Closes#34323Closes#34313
The previous PR #33932 introduced a way to "close" the
`pending_requests` buffer of the `TransportDelegate`, preventing any
more requests from being added. This prevents pending requests from
accumulating without ever being drained during the shutdown sequence;
without it, some of our tests hang at this point (due to using a
single-threaded executor).
The bug occurred because we were closing `pending_requests` whenever we
detected the server side of the transport shut down, and this closed
state stuck around and interfered with the retry logic for SSH+TCP
adapter connections.
This PR fixes the bug by only closing `pending_requests` on session
shutdown, and adds a regression test covering the SSH retry logic.
Release Notes:
- debugger: Fixed a bug causing SSH connections to some adapters
(Python, Go, JavaScript) to fail and restart endlessly.
This fixes an issue where lower-priority language servers cannot provide
contentful responses even when the first capable server returned empty
responses.
Most of the diffs are copypasted since the existing implementations were
also copypasted.
Release Notes:
- Improved Go to Definition / Declaration / Type Definition /
Implementation and Find All References to include all results from
different language servers
The major change in schemars 1.0 is that now schemas are represented as
plain json values instead of specialized datatypes. This allows for more
concise construction and manipulation.
This change also improves how settings schemas are generated. Each top
level settings type was being generated as a full root schema including
the definitions it references, and then these were merged. This meant
generating all shared definitions multiple times, and might have bugs in
cases where there are two types with the same names.
Now instead the schemar generator's `definitions` are built up as they
normally are and the `Settings` trait no longer has a special
`json_schema` method. To handle types that have schema that vary at
runtime (`FontFamilyName`, `ThemeName`, etc), values of
`ParameterizedJsonSchema` are collected by `inventory`, and the schema
definitions for these types are replaced.
To help check that this doesn't break anything, I tried to minimize the
overall [schema
diff](https://gist.github.com/mgsloan/1de549def20399d6f37943a3c1583ee7)
with some patches to make the order more consistent + schemas also
sorted with `jq -S .`. A skim of the diff shows that the diffs come
from:
* `enum: ["value"]` turning into `const: "value"`
* Differences in handling of newlines for "description"
* Schemas for generic types no longer including the parameter name, now
all disambiguation is with numeric suffixes
* Enums now using `oneOf` instead of `anyOf`.
Release Notes:
- N/A
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
Closes #ISSUE
Release Notes:
- N/A
In #32656 I generalized the argument to change selections to allow
controling both the scroll and the nav history (and the completion
trigger).
To avoid conflicting with ongoing debugger cherry-picks I left the
argument as an `impl Into<>`, but I think it's clearer to make callers
specify what they want here.
I converted a lot of `None` arguments to `SelectionEffects::no_scroll()`
to be exactly compatible; but I think many people used none as an "i
don't care" value in which case Default::default() might be more
appropraite
We are collecting billing address and name on checkout now (for tax) but
we're not saving it back to the Customer level. Updating the Checkout
Session code to make`customer_update.address` equal to `auto`, instead
of the default `never`, as well as the same for `customer_update.name`.
Release Notes:
- N/A
Summary
I've successfully implemented the required billing address collection
feature for Stripe Checkout sessions. Here's what was done:
### 1. **Added New Data Structures** (`stripe_client.rs`):
- Added `StripeBillingAddressCollection` enum with `Auto` and `Required`
variants
- Added `billing_address_collection` field to
`StripeCreateCheckoutSessionParams`
### 2. **Updated Stripe Client Implementation**
(`real_stripe_client.rs`):
- Added conversion from `StripeBillingAddressCollection` to Stripe's
`CheckoutSessionBillingAddressCollection`
- Updated the `TryFrom` implementation to map the billing address
collection field when creating checkout sessions
- Added the necessary import
### 3. **Updated Billing Service** (`stripe_billing.rs`):
- Set `billing_address_collection` to `Required` in both
`checkout_with_zed_pro()` and `checkout_with_zed_pro_trial()` methods
- Added the necessary import
### 4. **Updated Test Infrastructure** (`fake_stripe_client.rs`):
- Added `billing_address_collection` field to
`StripeCreateCheckoutSessionCall`
- Updated the `create_checkout_session` implementation to capture the
new field
- Added the necessary import
### 5. **Updated Tests** (`stripe_billing_tests.rs`):
- Added assertions to verify that `billing_address_collection` is set to
`Required` in all three test cases:
- `test_checkout_with_zed_pro`
- `test_checkout_with_zed_pro_trial` (regular trial)
- `test_checkout_with_zed_pro_trial` (extended trial)
- Added the necessary import
The implementation follows the pattern established in the codebase and
ensures that whenever a Stripe Checkout session is created for Zed Pro
subscriptions (both regular and trial), the billing address will be
required from customers. This aligns with the Stripe documentation you
provided, which shows that setting `billing_address_collection=required`
will ensure the billing address is always collected during checkout.
Release Notes:
- N/A
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
This breaks a transitive dependency of `agent` on UI crates. I've also
found and eliminated some dead code in assistant_context_editor.
Release Notes:
- N/A
Follow-up of https://github.com/zed-industries/zed/pull/33028
Due to request races, we cannot predict the amount of result_id s that
we'll get. Ensure their amount grows monotonically each time.
This time, iterations=5000 did not fail for me.
Release Notes:
- N/A
https://github.com/user-attachments/assets/ad0fa304-e4fb-4598-877d-c02141f35d6f
Closes https://github.com/zed-industries/zed/issues/4678
Also adds the code to support `textDocument/colorPresentation`
counterpart that serves as a resolve mechanism for the document colors.
The resolve itself is not run though, and the editor does not
accommodate color presentations in the editor yet — until a well
described use case is provided.
Use `lsp_document_colors` editor settings to alter the presentation and
turn the feature off.
Release Notes:
- Start showing inline previews for LSP document colors
This allows us to support debugging with a debug adapter not managed by
Zed. Note that this is not a user facing change, as DebugAdapterBinary
is used to determine how to spawn a debugger. Thus, this should not
break any configs or anything like that.
Closes #ISSUE
Release Notes:
- N/A
We believe that collab deploys currently cause outages because:
* All clients try to reconnect simultaneously
* This causes very high CPU usage on collab (and to some extent, the
database)
* This means that collab is slow to respond to clients
* So clients timeout and retry, over and over again.
We hope by letting clients in in buckets of 512, we can accept some
minor slowness to avoid
complete downtime, while we rewrite the system.
Release Notes:
- N/A
Closes [#13107](https://github.com/zed-industries/zed/issues/13107)
Enabled pull diagnostics by default, for the language servers that
declare support in the corresponding capabilities.
```
"diagnostics": {
"lsp_pull_diagnostics_debounce_ms": null
}
```
settings can be used to disable the pulling.
Release Notes:
- Added support for the LSP `textDocument/diagnostic` command.
# Brief
This is draft PR that implements the LSP `textDocument/diagnostic`
command. The goal is to receive your feedback and establish further
steps towards fully implementing this command. I tried to re-use
existing method and structures to ensure:
1. The existing functionality works as before
2. There is no interference between the diagnostics sent by a server and
the diagnostics requested by a client.
The current implementation is done via a new LSP command
`GetDocumentDiagnostics` that is sent when a buffer is saved and when a
buffer is edited. There is a new method called `pull_diagnostic` that is
called for such events. It has debounce to ensure we don't spam a server
with commands every time the buffer is edited. Probably, we don't need
the debounce when the buffer is saved.
All in all, the goal is basically to get your feedback and ensure I am
on the right track. Thanks!
## References
1.
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_pullDiagnostics
## In action
You can clone any Ruby repo since the `ruby-lsp` supports the pull
diagnostics only.
Steps to reproduce:
1. Clone this repo https://github.com/vitallium/stimulus-lsp-error-zed
2. Install Ruby (via `asdf` or `mise).
4. Install Ruby gems via `bundle install`
5. Install Ruby LSP with `gem install ruby-lsp`
6. Check out this PR and build Zed
7. Open any file and start editing to see diagnostics in realtime.
https://github.com/user-attachments/assets/0ef6ec41-e4fa-4539-8f2c-6be0d8be4129
---------
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Release Notes:
- Improved the review experience in the agent panel. Now, when you
commit changes (generated by the AI agent) using Git, Zed will
automatically dismiss the agent’s review UI for those changes. This
means you won’t have to manually “keep” or approve changes twice—just
commit, and you’re done.
This PR updates the `sync_subscription` function to use the
`StripeClient` trait instead of using `stripe::Client` directly.
Release Notes:
- N/A
---------
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
This PR moves over the last method on `StripeBilling` to use the
`StripeClient` trait, allowing us to fully mock out Stripe behaviors for
`StripeBilling` in tests.
Release Notes:
- N/A
This PR updates the `StripeBilling::checkout_with_zed_pro` and
`StripeBilling::checkout_with_zed_pro_trial` methods to use the
`StripeClient` trait instead of using `stripe::Client` directly.
Release Notes:
- N/A
This PR updates `StripeBilling` to use the `StripeClient` trait to
retrieve prices and meters from Stripe instead of using the
`stripe::Client` directly.
Release Notes:
- N/A
This PR introduces a new `StripeClient` trait to abstract over
interacting with the Stripe API.
This will allow us to more easily test our billing code.
This initial cut is small and focuses just on making
`StripeBilling::find_or_create_customer_by_email` testable. I'll follow
up with using the `StripeClient` in more places.
Release Notes:
- N/A
This PR replaces some `update()` calls with either `read()` or
`read_with()` when the `update()` call performed read-only operations on
the entity.
Many more likely exist, will follow-up with more PRs.
Release Notes:
- N/A
This PR allows DAPs to define their own schema so users can see
completion items when editing their debug.json files.
Users facing this aren’t the biggest chance, but behind the scenes, this
affected a lot of code because we manually translated common fields from
Zed's config format to be adapter-specific. Now we store the raw JSON
from a user's configuration file and just send that.
I'm ignoring the Protobuf CICD error because the DebugTaskDefinition
message is not yet user facing and we need to deprecate some fields in
it.
Release Notes:
- debugger beta: Show completion items when editing debug.json
- debugger beta: Breaking change, debug.json schema now relays on what
DAP you have selected instead of always having the same based values.
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Cole Miller <cole@zed.dev>
https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
- Adds a new smoke test for the use of the read_file tool by the agent
in an SSH project
- Fixes the SSH shutdown sequence to use a timer from the app's executor
instead of always using a real timer
- Changes the main executor loop for tests to advance the clock
automatically instead of panicking with `parked with nothing left to
run` when there is a delayed task
Release Notes:
- N/A
Adds a new `agent.model_parameters` setting that allows the user to
specify a custom temperature for a provider AND/OR model:
```json5
"model_parameters": [
// To set parameters for all requests to OpenAI models:
{
"provider": "openai",
"temperature": 0.5
},
// To set parameters for all requests in general:
{
"temperature": 0
},
// To set parameters for a specific provider and model:
{
"provider": "zed.dev",
"model": "claude-3-7-sonnet-latest",
"temperature": 1.0
}
],
```
Release Notes:
- agent: Allow customizing temperature by provider/model
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Because we instantiated `ContextServerManager` both in `agent` and
`assistant-context-editor`, and these two entities track the running MCP
servers separately, we were effectively running every MCP server twice.
This PR moves the `ContextServerManager` into the project crate (now
called `ContextServerStore`). The store can be accessed via a project
instance. This ensures that we only instantiate one `ContextServerStore`
per project.
Also, this PR adds a bunch of tests to ensure that the
`ContextServerStore` behaves correctly (Previously there were none).
Closes#28714Closes#29530
Release Notes:
- N/A
Nathan here: I also tacked on a bunch of UI refinement.
Release Notes:
- Introduced the ability to follow the agent around as it reads and
edits files.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
