Before this change it was using the same multibuffer point ranges in
every buffer, which only worked correctly for singleton buffers.
Release Notes:
- Fixed handling of selection ranges when formatting selections within a
multibuffer.
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This changes the behaviour of `<tab>` when inline completion is visible.
When the cursor is before the suggested indentation level, accepting a
completion should just indent.
cc @nathansobo @maxdeviant
Release Notes:
- Changed the behavior of `<tab>` at start of line when an inline
completion (Copilot, Supermaven, ...) is visible. If the cursor is
before the suggested indentation, `<tab>` now indents the line instead
of accepting the visible completion.
Co-authored-by: Antonio <antonio@zed.dev>
This fixes the issue described in this comment:
https://github.com/zed-industries/zed/pull/22439#issuecomment-2563896422
Essentially, we'd clip in the wrong direction when there were multi-line
inlay hints.
It also fixes inline completions for non-Zeta-providers showing up in
normal mode.
Release Notes:
- N/A
Closes#22720
Release Notes:
- `ExpandExcerpts` (`shift+enter` by default) now expands all excerpts
that have selected text, rather than just excerpts that contain the end
of a selection.
No need to find or store the primary range ahead of time as it's found
by `activate_diagnostics`.
Not entirely sure we should still even have the special case when the
popover is visible. It does support the keyboard interaction of opening
hover followed by jumping to the primary position, but that seems pretty
undiscoverable.
Support for clicking the hover to navigate to the primary diagnostic was
removed in https://github.com/zed-industries/zed/pull/3408
Release Notes:
- N/A
In #22620 `diagnostic_group` was modified to return results for
multibuffers, but was returning singleton buffer points. `hover_popover`
uses it to find the jump target for clicking the popup - which doesn't
seem to be working right now but that's a separate issue. Now that
`diagnostic_group` is returning values in multibuffers converting these
to anchors was crashing.
Also resolves a potential bug - if folding in multibuffers was supported
then "Go To Diagnostics" would not properly skip diagnostics from folded
regions.
Release Notes:
- N/A
- [x] Rewrite worktree git handling
- [x] Fix tests
- [x] Fix `test_propagate_statuses_for_repos_under_project`
- [x] Replace `WorkDirectoryEntry` with `WorkDirectory` in
`RepositoryEntry`
- [x] Add a worktree event for capturing git status changes
- [x] Confirm that the local repositories are correctly updating the new
WorkDirectory field
- [x] Implement the git statuses query as a join when pulling entries
out of worktree
- [x] Use this new join to implement the project panel and outline
panel.
- [x] Synchronize git statuses over the wire for collab and remote dev
(use the existing `worktree_repository_statuses` table, adjust as
needed)
- [x] Only send changed statuses to collab
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.com>
Co-authored-by: Nathan <nathan@zed.dev>
Clicking buffer headers and line numbers would sometimes take you to a
disorienting scroll position. This PR improves that so the destination
line is roughly at the same Y position as it appeared in the
multibuffer.
https://github.com/user-attachments/assets/3ad71537-cf26-4136-948f-c5a96df57178
**Note**: The alignment won't always be perfect because the multibuffer
and target buffer might start at a different absolute Y position
(because of open search, breadcrumbs, etc). I wanted to compensate for
that, but that requires a fundamental change that I'd prefer to make
separately.
Release Notes:
- Fix vertical alignment when jumping from multibuffers
Changes:
- [x] Increase expand affordance surface area
- [x] Ensure expand buttons have tooltips with keybindings
- [x] Make line numbers clickable to jump you to location (only in
multibuffers)
- [x] Hide the "Jump To File" element in not-focused excerpts
Before merging it:
- [x] Fix off-by-one header focus styles glitch
Improvements to consider for follow-up PRs:
1. Experiment with increasing the width of the clickable surface area
for line numbers
2. Don't show (or disable) the "expand excerpt" button when at the top
or bottom edge of the file
3. Once you jump to location, centralize the cursor scroll position
Release Notes:
- Improved multibuffer's "expand excerpt" affordance
- Fixed "jump to file/location" and "expand excerpt" keybinding display
- Made clicking on line numbers in multibuffers jump you to cursor
location in file
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Agus Zubiaga <hi@aguz.me>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Agus Zubiaga <agus@zed.dev>
* Remove unnecessary WindowContext and ViewContext '_ lifetimes
* Removed some cases where WindowContext has a different name than `cx`.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/19214
Closes https://github.com/zed-industries/zed/pull/22443
Adds `resolved` property into Zed completion item data, to ensure we
resolve every completion item exactly once.
There are 2 paths for singplayer Zed, and corresponding 2 analogues for
multi player code, where resolve may happen:
* completions menu display & selection, that ends up using
`resolve_completions` in `lsp_store.rs`
* applying a completion menu entry, that ends up using
`apply_additional_edits_for_completion` in `lsp_store.rs`
Now, all local counterparts check `enabled` field before resolving and
set it to true afterwards, and reuse the same `resolve_completion_local`
method for resolving the items.
A logic for re-generating docs and item labels was moved out from the
`resolve_completion_local` method into a separate method, as
`apply_additional_edits_for_completion` does not need that, but needs
the rest of the logic for resolving.
During the extraction, I've noted that multiplayer clients are not
getting the item labels, regenerated after the resolve — as the Zed
protocol-based flow is not the exact copy of the local resolving.
To improve that, `resolve_completion_remote` needs to be adjusted, but
this change is omitted to avoid bloating the PR.
Release Notes:
- Fixed autocomplete inserting multiple imports
* Now more often displayed to the right. Resizes docs width if more
space than min width is available.
* If constrained in horizontal space and so displayed above/below resize
docs height to fit.
* Makes space for scrollbar and gap.
Layout is imperfect for viewport sizes smaller than the context menu,
left TODOs in the code for handling this. Wanted to get this change out
for feedback first.
Release Notes:
- N/A
Makes a first pass over git panel UI, making it more interactive.
* every item can be selected, the selection is shown in the panel
* every item can be clicked, which changes the selection and
creates/focuses the editor with a project changes multi buffer
* the editor is scrolled so that the clicked item is in the center
* it's possible to nagivate up and down the panel, selecting
next/previous items in it, triggering the editor scroll
Known issues:
* entries are updated oddly sometimes (should become better after
DiffMap improvements land?)
* only unstaged diffs are shown currently (entry status storage should
help with this)
* no deleted files are displayed (the underlying work is done by others
now)
* added files have no diff hunks shown (DiffMap will have it?)
* performance story has not improved (again, DiffMap and status storage
should help with this)
Release Notes:
- N/A
This is quite experimental and untested in languages other than Rust.
It's written to attempt to do something sensible in many languages. Due
to its experimental nature, just releasing to staff, and so not
including it in release notes. Future release note might be "Improved
diagnostic excerpts by using syntactic info to determine the context
lines to show."
Release Notes:
- N/A
Leaving release notes as N/A because it had release notes in the past in
#21705
In #21286, documentation resolution was made more efficient by only
resolving the current completion. However, this meant that single line
documentation shown inline in the menu was missing until scrolled
to. This also meant that it would wait for navigation to resolve
completion docs, leading to lag for displaying documentation.
This change resolves this by attempting to fetch all the completions
that will be shown. It also mostly avoids re-resolving completions. It
intentionally re-resolves the current selection on navigation, as some
language servers will respond with more information later on.
Release Notes:
- N/A
Closes #ISSUE
Still TODO to make this feature good is better command history
Release Notes:
- vim: Add support for `:g/<pattern>/<cmd>` and `:v/<pattern>/<cmd>`
If an inline completion isn't shown in a menu, we highlight text in the
editor as deleted.
But if it's shown in the menu, we didn't even show deleted text, which
makes it hard to understand what's going on.
This fixes it.
Release Notes:
- N/A
This changes #22093 by making the change only have an effect for the
supported provider: Zeta.
Made the change because the UX is still experimental and I don't want to
break existing workflows for Copilot/Supermaven users.
Even Zeta users can opt-out of it by setting
`"show_inline_completions_in_menu": false` in their settings, in case
they want the old show-inline-completion-or-show-lsp-completion behavior
back.
Release Notes:
- N/A
Possible panic here in case we can't find the excerpt in the
multibuffer.
I thought this could happen when the inline completion references an
excerpt that disappeared from the multibuffer, but looking at the code
I'm not sure anymore - we use the same multibuffer snapshot in this
whole function and the `anchor_in_excerpt` method clips the anchors.
Still, let's be safe here.
Release Notes:
- N/A
We were committing the cardinal sin of subtracting one from a column
without clipping
Closes #ISSUE
Release Notes:
- Fixed a panic in linked editing ranges
* Presence of the aside no longer affects position or size of the
context menu.
* Prefers to fit to the right, then on same side of line, then other
side of line, within the following preference order:
- Max possible size within text area.
- Max possible size within window.
- Actual size within window. This is the only case that could cause it
to jump around with less stability.
A further enhancement atop this might be to dynamically resize aside
height to fit.
Release notes are N/A as they are covered by the notes for #22102.
Closes#8523
Release Notes:
* N/A
* Now decides whether the menu is above or below the target position
before rendering it. This causes its position to no longer vary
depending on the length of completions
* When the text area is height constrained (< 12) lines, now chooses the
side which has the most space. Before it would always display above if
height constrained below.
* Misc code cleanups
Release Notes:
- Improved completions menu layout to be more stable and use available
space better.
Follow-up of https://github.com/zed-industries/zed/pull/22004
* Reuse center terminals for tasks, when requested
* Extend task templates with `RevealTarget`, moving it from
`TaskSpawnTarget` into the core library
* Use `reveal_target` instead of `target` to avoid misinterpretations in
the task template context
* Do not expose `SpawnInTerminal` to user interface, avoid it
implementing `Serialize` and `Deserialize`
* Remove `NewCenterTask` action, extending `task::Spawn` interface
instead
* Do not require any extra unrelated parameters during task resolution,
instead, use task overrides on the resolved tasks on the modal side
* Add keybindings for opening the task modal in the
`RevealTarget::Center` mode
Release Notes:
- N/A
This is related to #22069 and #21858: before both of these PRs, we would
only ever show inline completions OR completions, never both at the same
time.
Now we show both at the same, but we still had this piece of logic here,
that prevented non-inline completions from showing up if there was
already an inline completion.
With this change, it's possible to get LSP completions without having to
dismiss inline completions before.
Release Notes:
- Inline completions (Copilot, Supermaven, ...) don't stop other
completions from showing up anymore. Both can now be visible at the same
time.
---------
Co-authored-by: Bennet <bennet@zed.dev>
I'm not sure about this yet.
On one hand: it's nice that the completion doesn't just disappear when I
hit escape because I was typing and in the flow.
On the other hand: no other inline completion provider keeps the
suggestion when leaving insert mode.
I'm going to merge this so we can get it into nightly and try it out for
the next couple of days. cc @ConradIrwin
Release Notes:
- vim: Do not dismiss inline completions when leaving insert/replace
mode with `<esc>`.
`CodeContextMenu` is always accessed on one thread, so only `Rc`s and
`Rc<RefCell<_>>` are needed. There should be tiny performance benefits
from this. The main benefit of this is that when seeing code accessing a
`RwLock` it would be reasonable to wonder whether it will block. The
only potential downside is the potential for panics due to overlapping
borrows of the RefCells. I think this is an acceptable risk because most
errors of this nature will be local or will be caught by clippy via the
check for holding a RefCell reference over an `await`.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/4925https://github.com/user-attachments/assets/e7b87375-893f-41ae-a2d9-d501499e40d1
Allows to fold any buffer inside multi buffers, either by clicking the
chevron icon on the header, or by using
`editor::Fold`/`editor::UnfoldLines`/`editor::ToggleFold`/`editor::FoldAll`
and `editor::UnfoldAll` actions inside the multi buffer (those were noop
there before).
Every fold has a fake line inside it, so it's possible to navigate into
that via the keyboard and unfold it with the corresponding editor
action.
The state is synchronized with the outline panel state: any fold inside
multi buffer folds the corresponding file entry; any file entry fold
inside the outline panel folds the corresponding buffer inside the multi
buffer, any directory fold inside the outline panel folds the
corresponding buffers inside the multi buffer for each nested file entry
in the panel.
Release Notes:
- Added a possibility to fold buffers inside multi buffers
---------
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Cole Miller <cole@zed.dev>
Closes#20060Closes#20720Closes#19873Closes#9445
Release Notes:
- Fixed a bug where tasks would be spawned with their working directory
set to a file in some cases
- Added the ability to spawn tasks in the center pane, when spawning
from a keybinding:
```json5
[
{
// Assuming you have a task labeled "echo hello"
"ctrl--": [
"task::Spawn",
{ "task_name": "echo hello", "target": "center" }
]
}
]
```
Improves the new `Editor::DuplicateSelection` @CharlesChen0823 added in
https://github.com/zed-industries/zed/pull/21154.
- Merge `duplicate_selection` and `duplicate_line` into single function.
- Add keyboard shortcuts to JetBrains and SublimeText keymaps.
- If the selection is empty (e.g. just a cursor) make
`Editor::DuplicateSelection` fallback to being the same as
`Editor::DuplicateLineDown`.
- Tested with multiple cursors and for multiple selections.
| Editor | Action | macOS | Linux |
| ----------- | ------------------- | ----------- | ------------ |
| VSCode | Duplicate Selection | | |
| JetBrains | Duplicate Selection | cmd-d | ctrl-d |
| XCode | Duplicate | cmd-d | N/A |
| SublimeText | duplicate_line | cmd-shift-d | ctrl-shift-d |
This matches behavior of the `duplicate` functionality in all other
major editors, with one exception: other editors change the selection so
that the newly duplicated object, current Zed behavior leaves the
original selection unchanged (TODO?)
- Adds the Switch component
- Updates `Selected`, `Selectable` -> `ToggleState`, `Toggleable`
- Adds `checkbox` and `switch` functions to align better with other
elements in our layout system.
We decided not to merge Switch and Checkbox. However, in a followup I'll
introduce a Toggle or AnyToggle enum so we can update
`CheckboxWithLabel` -> `ToggleWithLabel` as this component will work
exactly the same with either a Checkbox or a Switch.
Release Notes:
- N/A
Closes#21718
Just like in Vim, if a URL is selected, it opens exactly that portion of
the URL. Otherwise, if only the cursor is on a URL, it opens the entire
URL.
Zed currently does the latter. This PR also adds support for the former.
https://github.com/user-attachments/assets/8bdd2952-ceec-487c-b27a-5cea4258eb03
Release Notes:
- Updated the `editor: open url` to also handle the selected portion of
a URL.
This change allows defining keybindings that are active when there is a
text selection.
This is especially useful, as an example, for Emacs-like keybindings
where movement keybindings expand the selection.
Here is a snippet from my keymap.json that implements Emacs movements
when selection is active:
```json
{
"context": "Editor && selection",
"bindings": {
"ctrl-f": "editor::SelectRight",
"ctrl-b": "editor::SelectLeft",
"ctrl-n": "editor::SelectDown",
"ctrl-p": "editor::SelectUp",
"ctrl-a": "editor::SelectToBeginningOfLine",
"ctrl-e": "editor::SelectToEndOfLine",
"alt-f": "editor::SelectToNextWordEnd",
"alt-b": "editor::SelectToPreviousWordStart",
"alt-<": "editor::SelectToBeginning",
"alt->": "editor::SelectToEnd"
}
}
```
What do you think about inclusion of this feature? Should I add more granular `selection=single` `selection=multi`?
Release Notes:
- Added "selection" context for keybindings that are active when there is a text selection.
Closes https://github.com/zed-industries/zed/issues/6843
I don't see where is the logic to remove old document highlight when new
one applies,
ideally, old highlight should be cleared as soon as possible when cursor
moves if the new position does not
sits in old highlight ranges to avoid linger highlights described in
https://github.com/zed-industries/zed/issues/13682#issuecomment-2498368680.
So current solution is still not ideal, because only when lsp responses
highlight ranges (even is a empty set) can we clear the old one.
Release Notes:
- Added a setting `lsp_highlight_debounce` to configure delay for
querying highlights from language server.
---------
Co-authored-by: mgsloan@gmail.com <michael@zed.dev>
Still TODO:
* [x] Factor out `start_language_server` so we can call it on register
(instead of on detect language)
* [x] Only call register in singleton editors (or when
editing/go-to-definition etc. in a multibuffer?)
* [x] Refcount on register so we can unregister when no buffer remain
* [ ] (maybe) Stop language servers that are no longer needed after some
time
Release Notes:
- Fixed language servers starting when doing project search
- Fixed high CPU usage when ignoring warnings in the diagnostics view
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Cole <cole@zed.dev>
Michael SloanandThorsten Ball
Antonio ScandurraandThorsten
0x2CAandConrad Irwin
Cole Miller
Agus Zubiaga
Peter Tripp
Nate Butler
tims
CharlesChen0823
Ozan
xzbdmwandmgsloan@gmail.com <michael@zed.dev>
