Follows on from
https://github.com/zed-industries/zed/pull/37716#pullrequestreview-3195695110
by @SomeoneToIgnore
After this the doctests will be run in CI to check that the examples are
still accurate.
Note that doctests aren't run by Nextest: you can run them locally with
`cargo test --doc`.
Summary:
* Run tests from CI
* Loosen an exact float comparison to match approximately (otherwise it
fails)
* Fixed one actual bug in the tests for `dilate` where the test code
assumed that `dilate` mutates `self` rather than returning a new object
* Add some `must_use` on some functions that seemed at risk of similar
bugs, following the Rust stdlib style to add it where ignoring the
result is almost certainly a bug.
* Fix some cases where the doc examples seem to have gone out of date
with the code
* Add imports to doctests that need them
* Add some dev-dependencies to make the tests build
* Fix the `key_dispatch` module docstring, which was accidentally
attached to objects within that module
* Skip some doctest examples that seem like they need an async
environment or that just looked hard to get running
AI usage: I asked Claude to do some of the repetitive tests. I checked
the output and fixed up some things that seemed to not be in the right
spirit of the test, or too longwinded.
I think we could reasonably run the tests on only Linux to save CI
CPU-seconds and latency, but I haven't done that yet, partly because of
how it's implemented in the action.
Release Notes:
- N/A
Note that (at least for now) this only works for creases in the "new
message" editor, not when editing past messages. That's because we don't
have the original image available when putting together the creases for
past messages, only the base64-encoded language model content.
Release Notes:
- N/A
This PR improves the toggle button group to be more responsive across
different layouts. This is accomplished by ensuring each button takes up
the same amount of space in the parent containers layout.
Ideally, this should be done with grids instead of a flexbox container,
as this would be much better suited for this purpose. Yet, since we lack
support for this, we go with this route for now.
| Before | After |
| --- | --- |
| <img width="1608" height="1094" alt="Bildschirmfoto 2025-08-13 um 11
24 26"
src="https://github.com/user-attachments/assets/2a4b5a59-6483-4f79-8fcb-e26e22071795"
/> | <img width="1608" height="1094" alt="Bildschirmfoto 2025-08-13 um
11 29 36"
src="https://github.com/user-attachments/assets/e6402729-6a8f-4a44-b79e-a569406edfff"
/> |
Release Notes:
- N/A
Closes #ISSUE
Allows tabbing through everything in all three pages. Until #35075 is
merged it is not possible to actually "click" tab focused buttons with
the keyboard.
Additionally adds an action `onboarding::Finish` and displays the
keybind. The action corresponds to both the "Skip all" and "Start
Building" buttons, with the keybind displayed similar to how it is for
the page nav buttons
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: MrSubidubi <finn@zed.dev>
This PR polishes and adds functionality to the onboarding UI with a
focus on the basic page. It added theme preview tiles, got the Vim,
telemetry, crash reporting, and sign-in button working.
The theme preview component was moved to the UI crate and it now can
have a click handler on it.
Finally, this commit also changed `client::User.github_login` and
`client::UserStore.by_github_login` to use `SharedStrings` instead of
`Strings`. This change was made because user.github_login was cloned in
several areas including the UI, and was cast to a shared string in some
cases too.
Release Notes:
- N/A
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
This change cleans up the toggle button component a bit by utilizing
const parameters instead and also removes some clones by consuming the
values where possible instead.
Release Notes:
- N/A
Making icons consistent, adjusting spacing, and moving the "Leave Call"
button to be the very last, which makes more sense to me than the
"Share" button being the last. Sharing your project is still part of the
call, so in the left edge of the button strip is where, conceptually,
the option to end the call should be, I think!
Release Notes:
- N/A
Instead of selecting a screen to share arbitrarily, we'll now allow user
to select the screen to share. Note that sharing multiple screens at the
time is still not supported (though prolly not too far-fetched).
Related to #4666
Release Notes:
- Added screen selector dropdown to screen share button
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Cole Miller <cole@zed.dev>
This includes making sure that both the agent panel and Zed's edit
prediction have a consistent narrative when it comes to onboarding users
into the AI features, considering the possible different plans and
conditions (such as being signed in/out, account age, etc.)
Release Notes:
- N/A
---------
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
### This PR introduces support for adding watchers to specific
expressions (such as variable names or evaluated expressions).
This feature is useful in scenarios where many variables are in scope,
but only a few are of interest—especially when tracking variables that
change frequently. By allowing users to add watchers, it becomes easier
to monitor the values of selected expressions across stack frames
without having to sift through a large list of variables.
https://github.com/user-attachments/assets/c49b470a-d912-4182-8419-7406ba4c8f1e
------
**TODO**:
- [x] make render variable code reusable for render watch method
- [x] use SharedString for watches because of a lot of cloning
- [x] add tests
- [x] basic test
- [x] test step debugging
Release Notes:
- Debugger Beta: Add support for variable watchers
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Open inspector with `dev: toggle inspector` from command palette or
`cmd-alt-i` on mac or `ctrl-alt-i` on linux.
https://github.com/user-attachments/assets/54c43034-d40b-414e-ba9b-190bed2e6d2f
* Picking of elements via the mouse, with scroll wheel to inspect
occluded elements.
* Temporary manipulation of the selected element.
* Layout info and JSON-based style manipulation for `Div`.
* Navigation to code that constructed the element.
Big thanks to @as-cii and @maxdeviant for sorting out how to implement
the core of an inspector.
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-authored-by: Federico Dionisi <code@fdionisi.me>
This is desirable for when we want to use a `ButtonLike` to show a
tooltip over an icon, and we don't want it to show the "not allowed"
cursor on hover.
Release Notes:
- N/A
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
This PR cleans up some color & elevation misc.
### Don't allow deriving Color from Hsla
The point of the [ui::Color] enum is to encourage consistent color
usage, and the the Color::Custom case is really only meant for cases
where we have no other choice.
`impl From<Hsla> for Color` encourages blindly passing colors into
`Color::Custom` – with this in place we might as well remove the entire
`Color` enum.
The usages that were updated due to this removal were for colors that
already exist in the Color enum, making it even more clear that it
didn't make sense to have this.
### `ElevationIndex` -> `Elevation`
This name would make more sense if we had an `Elevation` in the first
place. The new name is more clear.
#### `Button::elevation`
As part of this change I also updated button's `layer` method to
`elevation`, since it takes an elevation. This method still has the
following issue:
You want to use `Button::elevation` when it's default colors are
invisible on the layer you are rendering the button on. However, current
this method uses the elevation's `bg` color, rather than it's
`on_elevation_bg`.
Ideally when you use `Button::elevation` you want to pass the elevation
you are _on_, not choosing one that will show up the elevation you are
on.
This change will be in a separate PR, as it likely will have widespread
visual impact across the app.
Release Notes:
- N/A
https://github.com/user-attachments/assets/b16e32e6-46c6-41dc-ab68-1824d288c8c2
This PR adds the first part of our planned extended notification system:
StatusToasts.
It also makes various updates to ComponentPreview and adds a `Styled`
extension in `ui::style::animation` to make it easier to animate styled
elements.
_**Note**: We will be very, very selective with what elements are
allowed to be animated in Zed. Assume PRs adding animation to elements
will all need to be manually signed off on by a designer._
## Status Toast
These are designed to be used for notifying about things that don't
require an action to be taken or don't need to be triaged. They are
designed to be ignorable, and dismiss themselves automatically after a
set time.
They can optionally include a single action.
Example: When the user enables Vim Mode, that action might let them undo
enabling it.
Status Toasts should _not_ be used when an action is required, or for
any binary choice.
If the user must provide some input, this isn't the right component!
### Out of scope
- Toasts should fade over a short time (like AnimationDuration::Fast or
Instant) when dismissed
- We should visually show when the toast will dismiss. We'll need to
pipe the `duration_remaining` from the toast layer -> ActiveToast to do
this.
- Dismiss any active toast if another notification kind is created, like
a Notification or Alert.
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
This PR updates the ui of the git panel. It removes the header from the
panel and unifies the repository, branch and commit controls in the
bottom section.
It also adds a secondary menu to the primary button giving access to a
variety of actions for managing local and remote changes:
Known issues (will be fixed in a later pr)
- Spinner showing git operation progress was removed, will be re-added
- Clicking expand with the panel editor focused will commit (due to
shared action name. Already tracked)
Before | After
(Also adds `component`, `linkme` to cargo-machete ignore as they are
used in the `IntoComponent` proc-macro and will always be incorrectly
flagged as unused)
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Cole Miller <53574922+cole-miller@users.noreply.github.com>
Co-authored-by: Cole Miller <cole@zed.dev>
This PR formalizes design components with the Component and
ComponentPreview traits.
You can open the preview UI with `workspace: open component preview`.
Component previews no longer need to return `Self` allowing for more
complex previews, and previews of components like `ui::Tooltip` that
supplement other components rather than are rendered by default.
`cargo-machete` incorrectly identifies `linkme` as an unused dep on
crates that have components deriving `IntoComponent`, so you may need to
add this to that crate's `Cargo.toml`:
```toml
# cargo-machete doesn't understand that linkme is used in the component macro
[package.metadata.cargo-machete]
ignored = ["linkme"]
```
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
In one of the recent changes to the edit predictions status bar menu, we
lost the red dot that is displayed when the user has Zed as the provider
but hasn't accepted terms of service. Note: All the checks were still in
place, just the visual indicator was missing.
Release Notes:
- N/A
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
This PR removes the `SwitchWithLabel` component because we're adding
`label` as a method to `Switch`. Thus, we no longer need an extra
component just to append a label. Additionally, we're also adding
`keybinding` as a method.
Release Notes:
- N/A
---------
Co-authored-by: Agus Zubiaga <hi@aguz.me>
TODO:
- [ ] Investigate incorrect hit target for `stage all` button
- [ ] Add top level context menu
- [ ] Add entry context menus
- [x] Show paths in list view
- [ ] For now, `enter` can just open the file
- [ ] 🐞: Hover deadzone in list caused by scrollbar
- [x] 🐞: Incorrect status/nothing shown when multiple worktrees are
added
---
This PR continues work on the feature flagged git panel.
Changes:
- Defines and wires up git panel actions & keybindings
- Re-scopes some actions from `git_ui` -> `git`.
- General git actions (StageAll, CommitChanges, ...) are scoped to
`git`.
- Git panel specific actions (Close, FocusCommitEditor, ...) are scoped
to `git_panel.
- Staging actions & UI are now connected to git!
- Unify more reusable git status into the GitState global over being
tied to the panel directly.
- Uses the new git status codepaths instead of filtering all workspace
entries
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <53574922+cole-miller@users.noreply.github.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Previously, to use a green and red shade with `TintColor` you'd need to
pass `Positive` and `Negative`, respectively. This terminology always
tripped me up, because, for example, I'd often try to use something
like:
```
Button::new("icon_color", "Negative")
style(ButtonStyle::Tinted(TintColor::Negative))
.color(Color::Error)
.icon_color(Color::Error)
.icon(IconName::Trash),
)
```
...and due to `icon_color` taking `Color::Error`, I'd always get
`TintColor` wrong at a first try, because I would, out of muscle memory,
write `TintColor::Error`, which wouldn't compile. That's exactly the
change in this PR—`TintColor` now takes `Success` and `Error` instead of
`Positive` and `Negative`, for more consistency.
Release Notes:
- N/A
Jason LeeandDanilo Leal
Martin Pool
Ben KunkleandAnthony
Piotr Osiewicz
Cole Miller
Finn Evers
Danilo Leal
Anthony EidandRemco Smits
Richard Feldman
Smit BarmaseandCole Miller
Nate Butler
lydiandy
Agus ZubiagaandDanilo Leal
k4leg
