Since `WindowsDispatcher` requires a minimum Windows version of Windows
10 Fall Creators Update (10.0.16299), and the `alacritty_terminal`
dependency relies on conPTY, an API introduced in the same version,
additionally, `DirectWriteTextSystem` also relies on Windows 10 Fall
Creators Update (10.0.16299), so it seems reasonable to make
`CosmicTextSystem` Linux-only. And we can use `DirectWriteTextSystem` on
the Windows platform exclusively. I hope this approach makes sense.
Release Notes:
- N/A
Release Notes:
- linux: Added GPU information to `editor: Copy System Specs to
Clipboard`
- linux: Show a prominant warning before running under llvmpipe and
similar.
This restores https://github.com/zed-industries/zed/pull/13943 which was
reverted in #13974 because it was possible to get in a state where focus
could not be restored on a window.
In this PR there's an additional change: `FocusIn` and `FocusOut` events
are always handled, even if the `event.mode` is not "NORMAL". In my
testing, `alt-tabbing` between windows didn't produce `FocusIn` and
`FocusOut` events when we had that check. Now, with the check removed,
it's possible to switch focus between two windows again with `alt-tab`.
Release Notes:
- N/A
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Added a more detailed message in place of the generic `checking...`
messages when Rust-analyzer is running.
- Added a rate limit for language server status messages, to reduce
noisiness of those updates.
- Added a `cancel language server work` action which will cancel
long-running language server tasks.
---------
Co-authored-by: Richard <richard@zed.dev>
Note:
- We have disabled all tests that rely on Postgres in the Linux CI. We
only really need to test these once, and as macOS is our team's primary
platform, we'll only enable them on macOS for local reproduction.
- We have disabled all tests that rely on the font metrics. We
standardized on Zed Mono in many fonts, but our CoreText Text System and
Cosmic Text System proved to be very different in effect. We should
revisit if we decide to standardize our text system across platforms
(e.g. using Harfbuzz everywhere)
- Extended the condition timeout significantly. Our CI machines are slow
enough that this is causing spurious errors in random tests.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
On most platforms, things were working correctly, but had the wrong
type. On X11, there were some problems with window and display size
calculations.
Release Notes:
- Fixed issues with window positioning on X11
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Mikayla <mikayla@zed.dev>
TODO:
- [x] Finish GPUI changes on other operating systems
This is a largely internal change to how we report data to our
diagnostics and telemetry. This PR also includes an update to our blade
backend which allows us to report errors in a more useful way when
failing to initialize blade.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
When running the tests for linux, I found a lot of benign errors getting
logged. This PR cuts down some of the noise from unnecessary workspace
serialization and SVG renders
Release Notes:
- N/A
Running the tests on windows currently fails for every gpui test using
the `TestPlatform` with
```rs
called `Result::unwrap()` on an `Err` value: CoInitialize has not been called. (0x800401F0)
```
trying to call `CoCreateInstance`in the `DirectWriteComponent`.
The `WindowsPlatform` calls
[`OleInitialize`](https://learn.microsoft.com/de-de/windows/win32/api/ole2/nf-ole2-oleinitialize)
which internally calls `CoInitializeEx` so I just copied that to the
`TestPlatform`.
Release Notes:
- N/A
The previous implementation relied on a background thread to wake up the
main thread,
which was prone to priority inversion under heavy load.
In a synthetic test, where we spawn 200 git processes while doing a 5ms
timeout, the old version blocked for 5-80ms, the new version blocks for
5.1-5.4ms.
Release Notes:
- Improved responsiveness of the main thread under high system load
This fixes restart after updates not working on Linux.
On Linux we can't reliably get the binary path after an update, because
the original binary was deleted and the path will contain ` (deleted)`.
See: https://github.com/rust-lang/rust/issues/69343
We *could* strip ` (deleted)` off, but that feels nasty. So instead we
save the original binary path, before we do the installation, then
restart.
Later on, we can also change this to be a _new_ binary path returned by
the installers, which we then have to start.
Release Notes:
- N/A
Now, regardless of how the Zed window is closed, Zed can remember the
window's restore size.
- [x] Windows implementation
- [x] macOS implementation
- [x] Linux implementation (partial)
- [x] update SQL data base (mark column `fullscreen` as deprecated)
The current implementation on Linux is basic, and I'm not sure if it's
correct.
The variable `fullscreen` in SQL can be removed, but I'm unsure how to
do it.
edit: mark `fullscreen` as deprecated
### Case 1
When the window is closed as maximized, reopening it will open in the
maximized state, and returning from maximized state will restore the
position and size it had when it was maximized.
https://github.com/zed-industries/zed/assets/14981363/7207752e-878a-4d43-93a7-41ad1fdb3a06
### Case 2
When the window is closed as fullscreen, reopening it will open in
fullscreen mode, and toggling fullscreen will restore the position and
size it had when it entered fullscreen (note that the fullscreen
application was not recorded in the video, showing a black screen, but
it had actually entered fullscreen mode).
https://github.com/zed-industries/zed/assets/14981363/ea5aa70d-b296-462a-afb3-4c3372883ea3
### What's more
- As English is not my native language, some variable and struct names
may need to be modified to match their actual meaning.
- I am not familiar with the APIs related to macOS and Linux, so
implementation for these two platforms has not been done for now.
- Any suggestions and ideas are welcome.
Release Notes:
- N/A
Notable things I've had to fix due to 1.78:
- Better detection of unused items
- New clippy lint (`assigning_clones`) that points out places where assignment operations with clone rhs could be replaced with more performant `clone_into`
Release Notes:
- N/A
fixes https://github.com/zed-industries/zed/issues/9132
By setting the app id, window managers like `sway` can apply custom
configuration like `for_window [app_id="zed"] floating enable`.
Tested using `wlprop`/`hyprctl activewindow` for wayland, `xprop` for
x11.
Release Notes:
- Zed now sets the window app id / class, which can be used e.g. in
window managers like `sway`/`i3` to define custom rules
@SomeoneToIgnore This code should 100% work for future Zed users, but
for current Zed users, Zed's internal list of recents may not be synced
w/ macOS' Recent Documents at first. If needed this can be fixed by
calling `cx.refresh_recent_documents` on startup, but that feels a bit
unnecessary.
Release Notes:
- Fixes behavior of Recent Documents list on macOS
Sharing a project displays a notification (window) on every screen.
Previously there was an issue with the positioning of windows on all
screens except the primary screen.
As you can see here:
Now:
@mikayla-maki and I also decided to refactor the `WindowOptions` a bit.
Previously you could specify bounds which controlled the positioning and
size of the window in the global coordinate space, while also providing
a display id (which screen to show the window on). This can lead to
unusual behavior because you could theoretically specify a global bound
which does not even belong to the display id which was provided.
Therefore we changed the api to this:
```rust
struct WindowOptions {
/// The bounds of the window in screen coordinates
/// None -> inherit, Some(bounds) -> set bounds.
pub bounds: Option<Bounds<DevicePixels>>,
/// The display to create the window on, if this is None,
/// the window will be created on the main display
pub display_id: Option<DisplayId>,
}
```
This lets you specify a display id, which maps to the screen where the
window should be created and bounds relative to the upper left of the
screen.
Release Notes:
- Fixed positioning of popup windows (e.g. when sharing a project) when
using multiple external displays.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Separate from #9451
On Windows, a new window may already active immediate after creation.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
This reverts #9053 and #9375 because they introduced a regression on
`main` that broke the titlebars on macOS:
Two things are off:
- Left padding is missing
- Titlebar height is less than it was before, which means the
traffic-light buttons are not centered vertically
What @as-cii and I noticed while looking into this: the `cfg!(macos)`
macros that were used don't work like that. You need to check for
`cfg!(target = "macos")` etc. Means that on macOS we never used the
macOS-specific code because the condition was always false.
Overall height, we're not sure about.
Release Notes:
- N/A
This PR changes GPUI to open windows with a default size and location,
and to otherwise inherit from their spawning window.
Note: The linux build now crashes on startup.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Ezekiel Warren <zaucy@users.noreply.github.com>
See https://zed.dev/channel/gpui-536
Fixes https://github.com/zed-industries/zed/issues/9010
Fixes https://github.com/zed-industries/zed/issues/8883
Fixes https://github.com/zed-industries/zed/issues/8640
Fixes https://github.com/zed-industries/zed/issues/8598
Fixes https://github.com/zed-industries/zed/issues/8579
Fixes https://github.com/zed-industries/zed/issues/8363
Fixes https://github.com/zed-industries/zed/issues/8207
### Problem
After transitioning Zed to GPUI 2, we started noticing that interacting
with the mouse on many UI elements would lead to a pretty annoying
flicker. The main issue with the old approach was that hover state was
calculated based on the previous frame. That is, when computing whether
a given element was hovered in the current frame, we would use
information about the same element in the previous frame.
However, inspecting the previous frame tells us very little about what
should be hovered in the current frame, as elements in the current frame
may have changed significantly.
### Solution
This pull request's main contribution is the introduction of a new
`after_layout` phase when redrawing the window. The key idea is that
we'll give every element a chance to register a hitbox (see
`ElementContext::insert_hitbox`) before painting anything. Then, during
the `paint` phase, elements can determine whether they're the topmost
and draw their hover state accordingly.
We are also removing the ability to give an arbitrary z-index to
elements. Instead, we will follow the much simpler painter's algorithm.
That is, an element that gets painted after will be drawn on top of an
element that got painted earlier. Elements can still escape their
current "stacking context" by using the new `ElementContext::defer_draw`
method (see `Overlay` for an example). Elements drawn using this method
will still be logically considered as being children of their original
parent (for keybinding, focus and cache invalidation purposes) but their
layout and paint passes will be deferred until the currently-drawn
element is done.
With these changes we also reworked geometry batching within the
`Scene`. The new approach uses an AABB tree to determine geometry
occlusion, which allows the GPU to render non-overlapping geometry in
parallel.
### Performance
Performance is slightly better than on `main` even though this new
approach is more correct and we're maintaining an extra data structure
(the AABB tree).
Release Notes:
- Fixed a bug that was causing popovers to flicker.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Thorsten <thorsten@zed.dev>
This adds a GPUI fallback for window prompts. Linux does not support
this feature by default, so we have to implement it ourselves.
This implementation also makes it possible for GPUI clients to override
the platform prompts with their own implementations.
This is just a first pass. These alerts are not keyboard accessible yet,
does not reflect the prompt level, they're implemented in-window, rather
than as popups, and the whole feature need a pass from a designer.
Regardless, this gets us one step closer to Linux support :)
<img width="650" alt="Screenshot 2024-03-06 at 5 58 08 PM"
src="https://github.com/zed-industries/zed/assets/2280405/972ebb55-fd1f-4066-969c-a87f63b22a6f">
Release Notes:
- N/A
This PR adds an `zed: Install Local Extension` action, which lets you
select a path to a folder containing a Zed extension, and install that .
When you select a directory, the extension will be compiled (both the
Tree-sitter grammars and the Rust code for the extension itself) and
installed as a Zed extension, using a symlink.
### Details
A few dependencies are needed to build an extension:
* The Rust `wasm32-wasi` target. This is automatically installed if
needed via `rustup`.
* A wasi-preview1 adapter WASM module, for building WASM components with
Rust. This is automatically downloaded if needed from a `wasmtime`
GitHub release
* For building Tree-sitter parsers, a distribution of `wasi-sdk`. This
is automatically downloaded if needed from a `wasi-sdk` GitHub release.
The downloaded artifacts are cached in a support directory called
`Zed/extensions/build`.
### Tasks
UX
* [x] Show local extensions in the Extensions view
* [x] Provide a button for recompiling a linked extension
* [x] Make this action discoverable by adding a button for it on the
Extensions view
* [ ] Surface errors (don't just write them to the Zed log)
Packaging
* [ ] Create a separate executable that performs the extension
compilation. We'll switch the packaging system in our
[extensions](https://github.com/zed-industries/extensions) repo to use
this binary, so that there is one canonical definition of how to
build/package an extensions.
### Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Also adds a new command `cli: Register Zed Scheme` that will cause URLs
to be opened in the current zed version, and we call this implicitly if
you install the CLI
Also add some status reporting to install cli
Fixes: #8857
Release Notes:
- Added success/error reporting to `cli: Install Cli`
([#8857](https://github.com/zed-industries/zed/issues/8857)).
- Removed `zed-{preview,nightly,dev}:` url schemes (used by channel
links)
- Added `cli: Register Zed Scheme` to control which zed handles the
`zed://` scheme (defaults to the most recently installed, or
the version that you last used `cli: Install Cli` with)
This practice makes it difficult to locate todo!s in my code when I'm
working. Let's take out the bang if we want to keep doing this.
Release Notes:
- N/A
This reverts commit 0cebf68306.
Although this thing is very cool, it is a top source of crashes.
Example crash:
```
Segmentation fault: 11 on thread 26
objc_retain +16
invocation function for block in Overlay::onCommandBufferCommit(id<MTLCommandBuffer>) +60
MTLDispatchListApply +52
```
Release Notes:
- Removed "Toggle Graphics Profiler" as it crashes too much.
张小白
Piotr Osiewicz
Conrad Irwin
apricotbucket28
Jakob Hellermann
Ezekiel Warren
Daniel Zhu
白山風露
Bennet Bo FennerandConrad Irwin
Rom Grk
