This removes around 900 unnecessary clones, ranging from cloning a few
ints all the way to large data structures and images.
A lot of these were fixed using `cargo clippy --fix --workspace
--all-targets`, however it often breaks other lints and needs to be run
again. This was then followed up with some manual fixing.
I understand this is a large diff, but all the changes are pretty
trivial. Rust is doing some heavy lifting here for us. Once I get it up
to speed with main, I'd appreciate this getting merged rather sooner
than later.
Release Notes:
- N/A
I also removed a debug assertion that wasn't true when a debug session
was restarting through a request, because there wasn't a booting task
Zed needed to run before the session.
I renamed SessionState::Building to SessionState::Booting as well,
because building implies that we're building code while booting the
session covers more cases and is more accurate.
Release Notes:
- debugger: Filter out more invalid debug configurations from the debug
picker
Co-authored-by: Remco Smits <djsmits12@gmail.com>
The spec says:
> ⬅️ Initialized Event
> This event indicates that the debug adapter is ready to accept
configuration requests (e.g. setBreakpoints, setExceptionBreakpoints).
>
> A debug adapter is expected to send this event when it is ready to
accept configuration requests (but not before the initialize request has
finished).
Previously in tests, `intercept_debug_sessions` was just spawning off a
background task to send the event after setting up the client, so the
event wasn't actually synchronized with the flow of messages in the way
the spec says it should be. This PR makes it so that the `FakeTransport`
injects the event right after a successful response to the initialize
request, and doesn't send it otherwise.
Release Notes:
- N/A
This is mostly setting up the UI for now; I expect it to be the biggest
chunk of work.
Release Notes:
- debugger: Added memory view
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This solves problems where users couldn't shut down sessions while
locators or build tasks are running.
I renamed `debugger::Session::Mode` enum to `SessionState` to be more
clear when it's referenced in other crates. I also embedded the boot
task that is created in `SessionState::Building` variant. This allows
sessions to shut down all created threads in their boot process in a
clean and idiomatic way.
Finally, I added a method on terminal that allows killing the active
task.
Release Notes:
- Debugger: Allow shutting down debug sessions while they're booting up
This PR updates the debugger panel's session list to be more useful in
some cases that are commonly hit when using the JavaScript adapter. We
make two adjustments, which only apply to JavaScript sessions:
- For a child session that's the only child of a root session, we
collapse it with its parent. This imitates what VS Code does in the
"call stack" view for JavaScript sessions.
- When a session has exactly one thread, we label the session with that
thread's name, instead of the session label provided by the DAP. VS Code
also makes this adjustment, which surfaces more useful information when
working with browser sessions.
Closes#33072
Release Notes:
- debugger: Improved the appearance of JavaScript sessions in the debug
panel's session list.
---------
Co-authored-by: Julia <julia@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Restarting sessions was broken in #33273 when we moved away from calling
`kill` in the shutdown sequence. This PR re-adds that `kill` call so
that old debug adapter processes will be cleaned up when sessions are
restarted within Zed. This doesn't re-introduce the issue that motivated
the original changes to the shutdown sequence, because we still send
Disconnect/Terminate to debug adapters when quitting Zed without killing
the process directly.
We also now remove manually-restarted sessions eagerly from the session
list.
Closes#33916
Release Notes:
- debugger: Fixed not being able to restart sessions for Debugpy and
other adapters that communicate over TCP.
- debugger: Fixed debug adapter processes not being cleaned up.
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
There were a couple of things preventing this from working:
- our hack to stop the node REPL from appearing broke in recent versions
of the JS DAP that started passing `--experimental-network-inspection`
by default
- we had lost the ability to create a debug terminal without specifying
a program
This PR fixes those issues. We also fixed environment variables from the
**runInTerminal** request not getting passed to the spawned program.
Release Notes:
- Debugger: Fix RunInTerminal not working for JavaScript debugger.
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Closes#33820
Release Notes:
- Improved performance of debug console when there are lots of output
events.
---------
Co-authored-by: Cole Miller <cole@zed.dev>
As pointed out in https://github.com/probe-rs/probe-rs/issues/3333, we
violate the spec by sending setExceptionBreakpoints even when the
adapter does not define any exceptions.
Release Notes:
- N/A
- **debugger: Update exception breakpoints list on capability update**
- **Do not prefill codelldb sourcelanguages by default**
Release Notes:
- debugger: CodeLLDB no longer enables pretty-printers for Rust by
default. This fixes pretty-printers for C++. This is a breaking change
for user-defined debug scenarios from debug.json; in order to enable
Rust pretty printing when using CodeLLDB, add `"sourceLanguages":
["rust"]` to your debug configuration. This change does not affect
scenarios automatically inferred by Zed.
---------
Co-authored-by: Anthony Eid <anthony@zed.dev>
Follow-up to #32852. This time we'll check if the debug session is
initialized before querying threads.
Release Notes:
- Fix Zed's debugger issuing threads request before it is allowed to do
so per DAP specification.
## Context
To support inline values a language will have to implement their own
provider trait that walks through tree sitter nodes. This is overly
complicated, hard to accurately implement for each language, and lacks
proper extension support.
This PR switches to a singular inline provider that uses a language's
`debugger.scm` query field to capture variables and scopes. The inline
provider is able to use this information to generate inlays that take
scope into account and work with any language that defines a debugger
query file.
### Todos
- [x] Implement a utility test function to easily test inline values
- [x] Generate inline values based on captures
- [x] Reimplement Python, Rust, and Go support
- [x] Take scope into account when iterating through variable captures
- [x] Add tests for Go inline values
- [x] Remove old inline provider code and trait implementations
Release Notes:
- debugger: Generate inline values based on a language debugger.scm file
Before this PR force quitting Zed would leave hanging debug adapter
processes and not allow debug adapters to clean up their sessions
properly.
This PR fixes this problem by sending a disconnect/terminate to all
debug adapters and force shutting down their processes after they
respond.
Co-authored-by: Cole Miller \<cole@zed.dev\>
Release Notes:
- debugger: Shutdown and clean up debug processes when force quitting
Zed
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Custom arguments replace any arguments that we normally pass to the DAP.
For interpreted languages, they are passed to the interpreter after the
DAP path or module. They can be combined with a custom binary, or you
can omit `dap.binary` and just customize the arguments to the DAPs we
download.
This doesn't take care of updating the extension API to support custom
arguments.
Release Notes:
- debugger: Implemented support for passing custom arguments to a debug
adapter binary using the `dap.args` setting.
- debugger: Fixed not being able to use the `dap` setting in
`.zed/settings.json`.
### This PR introduces support for adding watchers to specific
expressions (such as variable names or evaluated expressions).
This feature is useful in scenarios where many variables are in scope,
but only a few are of interest—especially when tracking variables that
change frequently. By allowing users to add watchers, it becomes easier
to monitor the values of selected expressions across stack frames
without having to sift through a large list of variables.
https://github.com/user-attachments/assets/c49b470a-d912-4182-8419-7406ba4c8f1e
------
**TODO**:
- [x] make render variable code reusable for render watch method
- [x] use SharedString for watches because of a lot of cloning
- [x] add tests
- [x] basic test
- [x] test step debugging
Release Notes:
- Debugger Beta: Add support for variable watchers
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Variable list wasn't notified when a set variable value request was
successfully. This caused the variable list and inline values to show
stale data in some cases, which this PR fixes.
Release Notes:
- debugger: Fix bug where setting a variable's value wouldn't update the
variable list or inline values
- [x] Pass in cwd
- [x] Use the appropriate package manager
- [x] Don't mix up package.json and composer.json
Release Notes:
- debugger: Fixed wrong arguments being passed to the DAP when debugging
scripts from package.json.
Release Notes:
- New session modal for a debugger will now show tasks from package.json
as debuggable scenarios
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
- Don't assume all located tasks come from our test runnables
- Run tests from the right working directory
- Scope forking behavior customization for jest and vitest more tightly,
to just our test runnables
- Standardize on `$PACKAGE_MANAGER exec -- $TEST_LIBRARY ...` to fix
runnables not working with npm
Release Notes:
- Debugger Beta: Fixed issues with debugging tasks from package.json and
test runnables.
Before this change, we would see "connection reset" when sending the
initialize
request over SSH in the case that the debug adapter was slow to boot.
(Although we'd have successfully created a connection to the local SSH
port,
trying to read/write from it would not work until the remote end of the
connection had been established)
Fixes #32575
Release Notes:
- debugger: Fix connecting to a Python debugger over SSH
- [x] foreground highlights
- [x] background highlights
- [x] advertise support in DAP capabilities
Closes#31372
Release Notes:
- Debugger Beta: added basic support for highlighting in the console
based on ANSI escape codes.
This PR fixes a common issue where a debug session won't start up and
user's weren't able to get any logs from the debug session. We now do
these three things
1. We know store a history of debug sessions
2. We added a new option to only look at the initialization sequence
3. We default to selecting a session in dap log view in stead of none
Release Notes:
- debugger: Add history to debug session logging
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Lukas Wirth
Umesh Yadav
tidely
Piotr Osiewicz
Conrad Irwin
Anthony EidandRemco Smits
Cole Miller
devjasperwangand张小白
Julia RyanandAnthony Eid
xdBronch
Cathal
