Instead of a menagerie of macros for implementing `Action`, now there
are just two:
* `actions!(editor, [MoveLeft, MoveRight])`
* `#[derive(..., Action)]` with `#[action(namespace = editor)]`
In both contexts, `///` doc comments can be provided and will be used in
`JsonSchema`.
In both contexts, parameters can provided in `#[action(...)]`:
- `namespace = some_namespace` sets the namespace. In Zed this is
required.
- `name = "ActionName"` overrides the action's name. This must not
contain "::".
- `no_json` causes the `build` method to always error and
`action_json_schema` to return `None`
and allows actions not implement `serde::Serialize` and
`schemars::JsonSchema`.
- `no_register` skips registering the action. This is useful for
implementing the `Action` trait
while not supporting invocation by name or JSON deserialization.
- `deprecated_aliases = ["editor::SomeAction"]` specifies deprecated old
names for the action.
These action names should *not* correspond to any actions that are
registered. These old names
can then still be used to refer to invoke this action. In Zed, the
keymap JSON schema will
accept these old names and provide warnings.
- `deprecated = "Message about why this action is deprecation"`
specifies a deprecation message.
In Zed, the keymap JSON schema will cause this to be displayed as a
warning. This is a new feature.
Also makes the following changes since this seems like a good time to
make breaking changes:
* In `zed.rs` tests adds a test with an explicit list of namespaces. The
rationale for this is that there is otherwise no checking of `namespace
= ...` attributes.
* `Action::debug_name` renamed to `name_for_type`, since its only
difference with `name` was that it
* `Action::name` now returns `&'static str` instead of `&str` to match
the return of `name_for_type`. This makes the action trait more limited,
but the code was already assuming that `name_for_type` is the same as
`name`, and it requires `&'static`. So really this just makes the trait
harder to misuse.
* Various action reflection methods now use `&'static str` instead of
`SharedString`.
Release Notes:
- N/A
Closes#31728
This PR introduced new setting `"helix_mode"`. Enabling which will
enable the `vim_mode` along with `helix` behavior.
This solves issue where `vim`'s `default_mode` was being used to switch
between mode instead of opening in `default_mode`.
When `helix_mode` is enabled switcing to `Normal mode` will now switch
to `HelixNormal`
Release Notes:
- Fixed - escape key not switching to normal mode when default_mode is
insert
- Added - `helix_mode` setting to enable/disable helix key bindings
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
- [x] foreground highlights
- [x] background highlights
- [x] advertise support in DAP capabilities
Closes#31372
Release Notes:
- Debugger Beta: added basic support for highlighting in the console
based on ANSI escape codes.
Release Notes:
- Added initial support for both `z l` and `z h` in vim mode
These changes relate to #17219 but don't yet close the issue, as this
Pull Request is simply adding support for horizontal scrolling in vim
mode and actually moving the cursor to the correct column in the current
row will be handled in a different Pull Request.
Some notes on these changes:
- 2 new default keybindings added to vim's keymap
- `z l` which triggers the new `vim::ColumnRight` action
- `z h` which triggers the new `vim::ColumnLeft` action
- Introduced a new `ScrollAmount` variant, `ScrollAmount::Column(f32)`
to represent horizontal scrolling
- Replaced usage of `em_width` with `em_advance` to actually scroll by
the width of the cursor, instead of the width of the character
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Reland of #30345 to fix merge conflicts with the new skip-completions
option
Fixes#29431Fixes#17592
Release Notes:
- vim: Scrolls are no longer added to the jumplist
Update the `vim::normal::search::Vim.search` method in order to
correctly set the search bar's case sensitive search option if the
`search.case_sensitive` setting is enabled.
Closes#32172
Release Notes:
- vim: Fixed a bug where the `search.case_sensitive` setting was not respected when activating search with <kbd>/</kbd> (`vim::Search`)
This Pull Request fixes the current paste behavior in vim mode, when in
visual mode, and the cursor is at a newline character. Currently this
joins the pasted contents with the line right below it, but in vim this
does not happen, so these changes make it so that Zed's vim mode behaves
the same as vim for this specific case.
Closes#29270
Release Notes:
- Fixed pasting in vim's visual line mode when cursor is on a newline
character
This Pull Request attempts to fix an issue where using `d}` in vim mode
would not delete all characters in case there's no blank lines at the
end of the buffer.
When calculating the end point for this motion, if there's no blank
lines at the end of the buffer, Zed was calculating it to be the last
character in the last line. However, if there's a newline at the end of
the buffer, it calculates the end point to be the point at the right of
the last character.
Here's an example, for the following buffer contents:
```
Hello!
Hello!
```
If the `d}` command is run at `(0, 0)`, the end point will be set to
`(1, 5)`. However, fi the same command is run for this buffer instead:
```
Hello!
Hello!
```
The end point will be set to `(1, 6)`, there's a 1 unit difference in
the column, which leads to all characters actually being deleted.
Closes#29393
Release Notes:
- Fixed deleting to the end of paragraph when there's no blank lines
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
When using 'c' with line-wise motions like j/k, operate like cc to fix
indentation issues.
Closes#28933
Release Notes:
- `c j` and `c k` now respect indentation
Update the `Vim::replace_command` method so as to reset the range in the
`BufferSearchBar` after running the replacement in order to fix the
issue where the number of matches in the search bar would be incorrect
after the replacement was done, as it would only take into consideration
the range in which the replacement happened, instead of the whole
buffer.
In order to get this working a new
`BufferSearchBar::clear_search_within_ranges` method is introduced in
these changes.
Release Notes:
- Fixed the number of matches displayed in the search bar after running
vim's substitute command.
This Pull Request updates the default behavior of the substitute (`s`)
command in vim mode to only replace the next match by default, instead
of all, and replace all matches only when the `g` flag is provided,
making it more similar to NeoVim's behavior.
In order to achieve this, the following changes were introduced:
- Update `BufferSearchBar::replace_next` to be a public method, so it
can be called from `Vim::replace_command` .
- Update the `Replacement::parse` to set the `should_replace_all` field
to `false` by default, and only set it to `true` if the `'g'` flag is
present in the query.
- Add support for when the `Replacement.should_replace_all` is set to
`false` in `Vim::replace_command`, so as to have it only replace the
next occurrence instead of all occurrences in the line.
- Introduce `BufferSearchBar::select_first_match` so as to activate the
first match on the line under the cursor.
Closes#24450
Release Notes:
- Improved vim's substitute command so as to only replace the first
match by default, and replace all matches if the `'g'` flag is provided
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: João Marcos <marcospb19@hotmail.com>
Release Notes:
- Fixed a panic with completions around non-ASCII code
---------
Co-authored-by: João Marcos <marcospb19@hotmail.com>
This PR reverts #27897, as it is causing a number of Helix-related tests
to fail:
```
Summary [ 84.324s] 1796 tests run: 1793 passed, 3 failed, 0 skipped
FAIL [ 0.434s] vim helix::test::test_delete
FAIL [ 0.562s] vim helix::test::test_delete_character_end_of_buffer
FAIL [ 0.537s] vim helix::test::test_delete_character_end_of_line
```
This reverts commit 9949512b64.
Release Notes:
- Community: Reverted https://github.com/zed-industries/zed/pull/27897.
This adds a `next_mode` parameter to the `vim::Paste` action. My main
use-case for this is for helix users, who will want to switch into
`HelixNormal` mode instead of `Normal` mode.
I'm not sure if this is the best approach -- another possibility would
be to have a global vim-vs-helix configuration, and then have every
invocation of "normal" mode choose vim or helix based on that global
configuration. But the approach in this PR is much less invasive.
Release Notes:
- vim: switch to the configured default mode after paste instead of
hard-coding Normal mode
This PR completes the process of moving git repository state storage and
scanning logic from the worktree crate to `project::git_store`.
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Conrad <conrad@zed.dev>
Before this change we didn't explicitly handle vim's exclusive-linewise
edgecase
(https://neovim.io/doc/user/motion.html#exclusive).
Instead we had hard-coded workarounds in a few places to make our tests
pass.
The most pernicious of these workarounds was that we represented a
visual line
selection as including the trailing newline (or leading newline for
files that
end with no newline), which other code had to undo to get back to what
the user
indended.
Closes#21440
Updates #6900
Release Notes:
- vim: Fixed `d]}` to not delete the closing brace
- vim: Fixed `d}` from the start of the line to not delete the paragraph
separator
- vim: Fixed `d}` from the middle of the line to not delete the final
newline
Closes#22398
Release Notes:
- vim: Adds `'` and `"` marks (last location jumped from in the current
buffer, and location when last exiting a buffer)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#26884
Release Notes:
- vim: Added `:marks` which brings up list of current marks
- confirming on selected mark in the view jumps to that mark
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/13111
Release Notes:
- vim: Added global marks `'[A-Z]`
- vim: Added persistence for global (and local) marks. When re-opening
the same workspace your previous marks will be available.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes https://github.com/zed-industries/zed/issues/24914 (again)
Release Notes:
- Fixed an issue where multi-line pasted content was auto-indented
incorrectly if copied from the middle of an existing line.
https://github.com/zed-industries/zed/pull/25663#issuecomment-2686095807
Renamed the `vim::Backspace` and `vim::Space` actions to
`vim::WrappingLeft` and `vim::WrappingRight` respectively. The old names
are still available, but they are marked as deprecated and users are
advised to use the new names.
Also added a paragraph to the docs describing how to enable wrapping
cursor navigation.
Closes#10400
Closes https://github.com/zed-industries/zed/issues/17947
Changes:
- Let vim::increment find boolean values in the line and toggle them.
Release Notes:
- vim: Added support for toggling boolean values with `ctrl-a`/`ctrl-x`
This solves a couple of issues with Vim search by making the search
buffer and `SearchableItem` aware of the direction of the search. If
`SearchOptions::BACKWARDS` is set, all operations will be reversed. By
making `SearchableItem` aware of the direction, the correct active match
can be selected when searching backward.
Fixes#22506. This PR does not fix the last problem in that issue, but
that one is also tracked in #8049.
Release Notes:
- Fixes incorrect behavior of backward search in Vim mode
Closes#22999
# Problem
Currently, the default soft wrap mode of an editor is determined by
reading the language-specific settings of the language _at offset zero_
in the editor's (multi)buffer. While this provides a way to pick a
single soft wrap mode for a multi-language multibuffer, it's a bad
choice for a single-buffer multibuffer that begins with a different
embedded language. For example, Markdown with frontmatter:
```markdown
---
my_front_matter
---
# Hello World
```
Setting this in config:
```json
"languages": {
"Markdown": { "soft_wrap": "bounded" }
},
```
Will not soft wrap the Markdown file as the language at offset zero is
YAML.
# Solution
Instead of using the language at offset zero, use the language of the
first buffer in the multibuffer (the buffer at offset zero). This gives
better behavior for single-buffer editors, and a similar default for
multi-language multibuffers as before.
# Testing
All existing `editor` crate tests pass, but I would appreciate any
guidance for where best to add additional testing.
Release Notes:
- Fixed soft_wrap setting not applying to buffers starting with a
different language
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
In file search submit action, handle unwrap when there are no prior
selection.
Fix is for recently made commits, hence no release notes.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <anthony@zed.dev>
Add support for `stop_at_indent` option for MoveToBeginningOfLine and SelectToBeginningOfLine instead of mixing that with `stop_at_soft_wraps`.
Add emacs mapping for `alt-m` (`back-to-indentation`)
Changes:
- [x] Cursor at the start during yank operations on objects (`yip`,
`yab` etc).
- [x] Refactors this: Trim all leading and trailing whitespace from
inner multiline bracket selection.
- This leaves a nicely indented line when doing `ci{` `vi{d` etc
- [x] Checks for empty selection
- [x] Removed moving cursor to the start in visual bracket operations
This cleans up the previous implementation by providing a simpler check
in `surrounding_markers`, instead of calling a new function in
`expand_object`. No functionality was changed there except for handling
the empty selection and removing some cursor adjustments that should not
have been there after further testing.
Release Notes:
- N/A
Closes#12236
This PR fixes an issue where the `auto_indent_on_paste` setting was not
being applied for pasting in Vim mode. It was correctly used for normal
paste behavior.
Also includes tests.
Release Notes:
- Fixed yank + paste indenting incorrectly when `auto_indent_on_paste`
is set to `false` in certain languages.
Conrad Irwin
Michael Sloan
Sanjeev ShresthaandConrad Irwin
Cole Miller
DinoandConrad Irwin
AidanVandConrad Irwin
Hilda24
5brian
Peter Finn
jneem
Marshall Bowers
0x2CAandConrad Irwin
Piotr Osiewicz
Mikayla Maki
Asqar Arslanov
Nico Lehmann
Alex OzerandKirill Bulatov
smit
Peter Tripp