This PR allows DAPs to define their own schema so users can see
completion items when editing their debug.json files.
Users facing this aren’t the biggest chance, but behind the scenes, this
affected a lot of code because we manually translated common fields from
Zed's config format to be adapter-specific. Now we store the raw JSON
from a user's configuration file and just send that.
I'm ignoring the Protobuf CICD error because the DebugTaskDefinition
message is not yet user facing and we need to deprecate some fields in
it.
Release Notes:
- debugger beta: Show completion items when editing debug.json
- debugger beta: Breaking change, debug.json schema now relays on what
DAP you have selected instead of always having the same based values.
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Cole Miller <cole@zed.dev>
This PR simplifies the new session modal by flattening its three modes
and updating the UI to be less noisy. The new UI also defaults to the
Debug Scenario Picker, and allows users to save debug scenarios created
in the UI to the active worktree's .zed/debug.json file.
Release Notes:
- N/A
I added some tests to ensure that this regression doesn't happen again.
This also fixes the cargo test locators, debugging all tests in a module
instead of just the singular test a user selects.
Release Notes:
- N/A
This fixes a deadlock that would occur when `DapStore` had its on quit
handler called. The deadlock was caused by `DapStore` spawning on the
main thread while `App::shutdown` blocks the main thread.
We added a debug_panic in GPUI that panics if a foreground task is
spawned while the App context is shutting down. This will help tests
catch hangs in `cx.on_app_quit` calls.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Now all debug sessions are routed through the debug panel and are
started synchronously instead of by a task that returns a session once
the initialization process is finished. A session is `Mode::Booting`
while it's starting the debug adapter process and then transitions to
`Mode::Running` once this is completed.
This PR also added new tests for the dap logger, reverse start debugging
request, and debugging over SSH.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Zed AI <ai@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Split `locator` out of DebugTaskDefinition to make it clearer when
location needs to happen.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Cole Miller <m@cole-miller.net>
To make DAP work over SSH we want to create the binary
at the project level (so we can wrap it in an `ssh` invocation
transparently).
This means not pushing the adapter down into the session, and resolving
more information ahead-of-time.
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Piotr <piotr@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony <anthony@zed.dev>
This PR adds passing in `stop_on_entry` to debug configs in debug.json
instead of going through initialization args.
This has two benefits:
1. It's more streamlined to a user since every internal adapter supports
`stop_on_entry` for launch requests and Go's adapter supports it for
attach requests too.
2. It will allow @osiewicz `NewSesssionModal` PR to use this field for
the stop on entry checkbox.
Release Notes:
- N/A
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
