This PR simplifies the new session modal by flattening its three modes
and updating the UI to be less noisy. The new UI also defaults to the
Debug Scenario Picker, and allows users to save debug scenarios created
in the UI to the active worktree's .zed/debug.json file.
Release Notes:
- N/A
## Context
This PR improves the accuracy of our inline values for Rust/Python. It
does this by only adding inline value hints to the last valid use of a
variable and checking whether variables are valid within a given scope
or not.
We also added tests for Rust/Python inline values and inline values
refreshing when stepping in a debug session.
### Future tasks
1. Handle functions that have inner functions defined within them.
2. Add inline values to variables that were used in inner scopes but not
defined in them.
3. Move the inline value provider trait and impls to the language trait
(or somewhere else).
4. Use Semantic tokens as the first inline value provider and fall back
to tree sitter
5. add let some variable statement, for loops, and function inline value
hints to Rust.
6. Make writing tests more streamlined.
6.1 We should be able to write a test by only passing in variables,
language, source file, expected result, and stop position to a function.
7. Write a test that has coverage for selecting different stack frames.
co-authored-by: Remco Smits \<djsmits12@gmail.com\>
Release Notes:
- N/A
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Currently contains the pre-work of making sessions creatable without a
definition, but still need to change the spawn in terminal
to use the running session
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
I also moved the breakpoint store to session from local mode, because
both remote/local modes will need the ability to remove active debug
lines.
Release Notes:
- N/A
DebugSession.mode is no longer needed because project::debugger::Session
manages its own state now (booting, running, terminated), and removing
mode simplifies a lot of the code that uses running state.
I used Zed AI to do a good chunk of the refactor, but I doubled-checked
everything it did and changed a good amount of its updates.
Release Notes:
- N/A
Co-authored-by: Zed AI <ai@zed.dev>
This cleans up a bunch of indirection and will make it easier to
show the session building state in the debugger terminal
Closes #ISSUE
Release Notes:
- N/A
## Context
The bug occurred because we stopped propagating the
`BreakpointStoreEvent::SetDebugLine` whenever a new debug line highlight
had been set. This was done to prevent multiple panes from having
editors focus on the debug line. However, it stopped the event from
propagating to editors that needed to clear their debug line highlights.
I fixed this by introducing two phases
1. Clear all debug line highlights
2. Set active debug line highlight in singular editor
I also added a test to prevent regressions from occurring
Release Notes:
- N/A
I added some tests to ensure that this regression doesn't happen again.
This also fixes the cargo test locators, debugging all tests in a module
instead of just the singular test a user selects.
Release Notes:
- N/A
This fixes a deadlock that would occur when `DapStore` had its on quit
handler called. The deadlock was caused by `DapStore` spawning on the
main thread while `App::shutdown` blocks the main thread.
We added a debug_panic in GPUI that panics if a foreground task is
spawned while the App context is shutting down. This will help tests
catch hangs in `cx.on_app_quit` calls.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Now all debug sessions are routed through the debug panel and are
started synchronously instead of by a task that returns a session once
the initialization process is finished. A session is `Mode::Booting`
while it's starting the debug adapter process and then transitions to
`Mode::Running` once this is completed.
This PR also added new tests for the dap logger, reverse start debugging
request, and debugging over SSH.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Cole Miller <m@cole-miller.net>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Zed AI <ai@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Split `locator` out of DebugTaskDefinition to make it clearer when
location needs to happen.
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Cole Miller <m@cole-miller.net>
To make DAP work over SSH we want to create the binary
at the project level (so we can wrap it in an `ssh` invocation
transparently).
This means not pushing the adapter down into the session, and resolving
more information ahead-of-time.
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Piotr <piotr@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony <anthony@zed.dev>
This PR makes a debugger's pane layout persistent across session's that
use the same debug adapter.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Cole Miller <m@cole-miller.net>
This PR lightly refactors the `EditorMode::Full` exposing two new
methods: `is_full` and `set_mode`.
Motivation is to expose fields that modify the behavior when the editor
is in `Full` mode. By using is `mode.is_full()` instead of
`EditorMode::Full` we can introduce new fields without breaking other
places in the code.
Release Notes:
- N/A
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
## Summary
### Actions
This PR implements actions that allow a user to "run to cursor" and
"evaluate selected text" while there's an active debug session and
exposes the functionality to the UI as well.
- Run to cursor: Can be accessed by right clicking on the gutter
- Evaluate selected text: Can be accessed by selecting text then right
clicking in the editor
### Bug fixes
I also fixed these bugs as well
- Panic when using debugger: Stop action
- Debugger actions command palette filter not working properly in all
cases
- We stopped displaying the correct label in the session's context menu
when a session was terminated
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
There were two bugs that caused the gdb adapter not to work properly,
one on our end and one their end.
The bug on our end was sending `stopOnEntry: null` in our launch request
when stop on entry had no value. I fixed that bug across all dap
adapters
The other bug had to do with python's "great" type system and how we
serialized our unit structs to json; mainly,
`ConfigurationDoneArguments` and `ThreadsArguments`. Gdb seems to follow
a pattern for handling requests where they pass `**args` to a function,
this errors out when the equivalent json is `"arguments": null`.
```py
@capability("supportsConfigurationDoneRequest")
@request("configurationDone", on_dap_thread=True)
def config_done(**args): ### BUG!!
...
```
Release Notes:
- N/A
This PR adds passing in `stop_on_entry` to debug configs in debug.json
instead of going through initialization args.
This has two benefits:
1. It's more streamlined to a user since every internal adapter supports
`stop_on_entry` for launch requests and Go's adapter supports it for
attach requests too.
2. It will allow @osiewicz `NewSesssionModal` PR to use this field for
the stop on entry checkbox.
Release Notes:
- N/A
## Summary
This PR starts the process of adding debug task locators to Zed's
debugger system. A task locator is a secondary resolution phase that
allows a debug task to run a command before starting a debug session and
then uses the output of the run command to configure itself.
Locators are most applicable when debugging a compiled language but will
be helpful for any language as well.
## Architecture
At a high level, this works by adding a debug task queue to `Workspace`.
Which add's a debug configuration associated with a `TaskId` whenever a
resolved task with a debug config is added to `TaskInventory`'s queue.
Then, when the `SpawnInTerminal` task finishes running, it emits its
task_id and the result of the ran task.
When a ran task exits successfully, `Workspace` tells `Project` to start
a debug session using its stored debug config, then `DapStore` queries
the `LocatorStore` to configure the debug configuration if it has a
valid locator argument.
Release Notes:
- N/A
This is a clean-up PR in anticipation of introduction of Debugger
Registry. I wanna get rid of DebugAdapterKind (or rather, it being an
enum).
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
This PR improves the keyboard navigation for the variable list.
Before this PR, if you want to open/close nested variables, you had to
use the right/left & up/down arrow keys.
Now you can step through with just only using your left/right arrow
keys, this feels a bit more natural and more similar to how other
editors allow you to navigate through variables.
This PR also fixes the following issues:
- Allow selecting a scope to be the start of your selection
- Allow selecting previous item if the first item is selected
-----
https://github.com/user-attachments/assets/aff0b133-97be-4c09-8ee6-b11495ad5568
Release Notes:
- N/A
This PR adds an action that clears all breakpoints and notifies any
active DAPs.
todo
- [x] Implement clear functionality
- [x] Write an integration test for this
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
This PR fixes a few issues around shutting down a debug adapter.
The first issue I discovered was when I shut down all sessions via
`shutdown all adapters` command. We would still fetch the threads
request again, because we receive a thread event that indicated that it
exited. But this will always time out because the debug adapter is
already shutdown at this point, so by updating the check so we don't
allow fetching a request when the session is terminated fixes the issue.
The second issue fixes a bug where we would always shut down the parent
session, when a child session is terminated. This was reintroduced by
the big refactor. This is not something we want, because you could
receive multiple StartDebugging reverse requests, so if one child is
shutting down that does not mean the other ones should have been
shutting down as well.
Issue was original fixed in
https://github.com/RemcoSmitsDev/zed/pull/80#issuecomment-2573943661.
## TODO:
- [x] Add tests
Release Notes:
- N/A
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
Anthony Eid
Conrad IrwinandPiotr Osiewicz
Danilo LealandBennet Bo Fenner
