wrapped all string literals with tr()
This commit is contained in:
itsmattkc
+196
-142
@@ -217,7 +217,7 @@ MainWindow::MainWindow(QWidget *parent, const QString &an) :
|
||||
// detect auto-recovery file
|
||||
autorecovery_filename = data_dir + "/autorecovery.ove";
|
||||
if (QFile::exists(autorecovery_filename)) {
|
||||
if (QMessageBox::question(nullptr, "Auto-recovery", "Olive didn't close properly and an autorecovery file was detected. Would you like to open it?", QMessageBox::Yes, QMessageBox::No) == QMessageBox::Yes) {
|
||||
if (QMessageBox::question(nullptr, tr("Auto-recovery"), tr("Olive didn't close properly and an autorecovery file was detected. Would you like to open it?"), QMessageBox::Yes, QMessageBox::No) == QMessageBox::Yes) {
|
||||
enable_launch_with_project = false;
|
||||
open_project_worker(autorecovery_filename, true);
|
||||
}
|
||||
@@ -244,20 +244,20 @@ void MainWindow::launch_with_project(const QString& s) {
|
||||
}
|
||||
|
||||
void MainWindow::make_new_menu(QMenu *parent) {
|
||||
parent->addAction("&Project", this, SLOT(new_project()), QKeySequence("Ctrl+N"));
|
||||
parent->addAction(tr("&Project"), this, SLOT(new_project()), QKeySequence("Ctrl+N"))->setProperty("id", "newproj");
|
||||
parent->addSeparator();
|
||||
parent->addAction("&Sequence", this, SLOT(new_sequence()), QKeySequence("Ctrl+Shift+N"));
|
||||
parent->addAction("&Folder", this, SLOT(new_folder()));
|
||||
parent->addAction(tr("&Sequence"), this, SLOT(new_sequence()), QKeySequence("Ctrl+Shift+N"))->setProperty("id", "newseq");
|
||||
parent->addAction(tr("&Folder"), this, SLOT(new_folder()))->setProperty("id", "newfolder");
|
||||
}
|
||||
|
||||
void MainWindow::make_inout_menu(QMenu *parent) {
|
||||
parent->addAction("Set In Point", this, SLOT(set_in_point()), QKeySequence("I"));
|
||||
parent->addAction("Set Out Point", this, SLOT(set_out_point()), QKeySequence("O"));
|
||||
parent->addAction("Enable/Disable In/Out Point", this, SLOT(enable_inout()));
|
||||
parent->addAction(tr("Set In Point"), this, SLOT(set_in_point()), QKeySequence("I"))->setProperty("id", "setinpoint");
|
||||
parent->addAction(tr("Set Out Point"), this, SLOT(set_out_point()), QKeySequence("O"))->setProperty("id", "setoutpoint");
|
||||
parent->addAction(tr("Enable/Disable In/Out Point"), this, SLOT(enable_inout()))->setProperty("id", "enableinout");
|
||||
parent->addSeparator();
|
||||
parent->addAction("Reset In Point", this, SLOT(clear_in()));
|
||||
parent->addAction("Reset Out Point", this, SLOT(clear_out()));
|
||||
parent->addAction("Clear In/Out Point", this, SLOT(clear_inout()), QKeySequence("G"));
|
||||
parent->addAction(tr("Reset In Point"), this, SLOT(clear_in()))->setProperty("id", "resetin");
|
||||
parent->addAction(tr("Reset Out Point"), this, SLOT(clear_out()))->setProperty("id", "resetout");
|
||||
parent->addAction(tr("Clear In/Out Point"), this, SLOT(clear_inout()), QKeySequence("G"))->setProperty("id", "clearinout");
|
||||
}
|
||||
|
||||
void kbd_shortcut_processor(QByteArray& file, QMenu* menu, bool save, bool first) {
|
||||
@@ -274,7 +274,7 @@ void kbd_shortcut_processor(QByteArray& file, QMenu* menu, bool save, bool first
|
||||
if (a->shortcut() != defks) {
|
||||
// custom shortcut
|
||||
if (!file.isEmpty()) file.append('\n');
|
||||
file.append(a->text().replace("&", ""));
|
||||
file.append(a->property("id").toString());
|
||||
file.append('\t');
|
||||
file.append(a->shortcut().toString());
|
||||
}
|
||||
@@ -288,18 +288,20 @@ void kbd_shortcut_processor(QByteArray& file, QMenu* menu, bool save, bool first
|
||||
// restore default shortcut
|
||||
a->setShortcut(a->property("default").toString());
|
||||
}
|
||||
QString comp_str = a->text().replace("&", "");
|
||||
int shortcut_index = file.indexOf(comp_str);
|
||||
if (shortcut_index == 0 || (shortcut_index > 0 && file.at(shortcut_index-1) == '\n')) {
|
||||
shortcut_index += comp_str.size() + 1;
|
||||
QString shortcut;
|
||||
while (shortcut_index < file.size() && file.at(shortcut_index) != '\n') {
|
||||
shortcut.append(file.at(shortcut_index));
|
||||
shortcut_index++;
|
||||
}
|
||||
QKeySequence ks(shortcut);
|
||||
if (!ks.isEmpty()) {
|
||||
a->setShortcut(ks);
|
||||
if (!a->property("id").isNull()) {
|
||||
QString comp_str = a->property("id").toString();
|
||||
int shortcut_index = file.indexOf(comp_str);
|
||||
if (shortcut_index == 0 || (shortcut_index > 0 && file.at(shortcut_index-1) == '\n')) {
|
||||
shortcut_index += comp_str.size() + 1;
|
||||
QString shortcut;
|
||||
while (shortcut_index < file.size() && file.at(shortcut_index) != '\n') {
|
||||
shortcut.append(file.at(shortcut_index));
|
||||
shortcut_index++;
|
||||
}
|
||||
QKeySequence ks(shortcut);
|
||||
if (!ks.isEmpty()) {
|
||||
a->setShortcut(ks);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -416,7 +418,7 @@ void MainWindow::zoom_out() {
|
||||
|
||||
void MainWindow::export_dialog() {
|
||||
if (sequence == nullptr) {
|
||||
QMessageBox::information(this, "No active sequence", "Please open the sequence you wish to export.", QMessageBox::Ok);
|
||||
QMessageBox::information(this, tr("No active sequence"), tr("Please open the sequence you wish to export."), QMessageBox::Ok);
|
||||
} else {
|
||||
ExportDialog e(this);
|
||||
e.exec();
|
||||
@@ -506,7 +508,7 @@ void MainWindow::autorecover_interval() {
|
||||
}
|
||||
|
||||
bool MainWindow::save_project_as() {
|
||||
QString fn = QFileDialog::getSaveFileName(this, "Save Project As...", "", OLIVE_FILE_FILTER);
|
||||
QString fn = QFileDialog::getSaveFileName(this, tr("Save Project As..."), "", OLIVE_FILE_FILTER);
|
||||
if (!fn.isEmpty()) {
|
||||
if (!fn.endsWith(".ove", Qt::CaseInsensitive)) {
|
||||
fn += ".ove";
|
||||
@@ -531,8 +533,8 @@ bool MainWindow::can_close_project() {
|
||||
if (isWindowModified()) {
|
||||
QMessageBox* m = new QMessageBox(
|
||||
QMessageBox::Question,
|
||||
"Unsaved Project",
|
||||
"This project has changed since it was last saved. Would you like to save it before closing?",
|
||||
tr("Unsaved Project"),
|
||||
tr("This project has changed since it was last saved. Would you like to save it before closing?"),
|
||||
QMessageBox::Yes|QMessageBox::No|QMessageBox::Cancel,
|
||||
this
|
||||
);
|
||||
@@ -553,341 +555,390 @@ void MainWindow::setup_menus() {
|
||||
|
||||
// INITIALIZE FILE MENU
|
||||
|
||||
QMenu* file_menu = menuBar->addMenu("&File");
|
||||
QMenu* file_menu = menuBar->addMenu(tr("&File"));
|
||||
connect(file_menu, SIGNAL(aboutToShow()), this, SLOT(fileMenu_About_To_Be_Shown()));
|
||||
|
||||
QMenu* new_menu = file_menu->addMenu("&New");
|
||||
QMenu* new_menu = file_menu->addMenu(tr("&New"));
|
||||
make_new_menu(new_menu);
|
||||
|
||||
file_menu->addAction("&Open Project", this, SLOT(open_project()), QKeySequence("Ctrl+O"));
|
||||
file_menu->addAction(tr("&Open Project"), this, SLOT(open_project()), QKeySequence("Ctrl+O"))->setProperty("id", "openproj");
|
||||
|
||||
clear_open_recent_action = new QAction("Clear Recent List");
|
||||
clear_open_recent_action = new QAction(tr("Clear Recent List"));
|
||||
clear_open_recent_action->setProperty("id", "clearopenrecent");
|
||||
connect(clear_open_recent_action, SIGNAL(triggered()), panel_project, SLOT(clear_recent_projects()));
|
||||
|
||||
open_recent = file_menu->addMenu("Open Recent");
|
||||
open_recent = file_menu->addMenu(tr("Open Recent"));
|
||||
|
||||
open_recent->addAction(clear_open_recent_action);
|
||||
|
||||
file_menu->addAction("&Save Project", this, SLOT(save_project()), QKeySequence("Ctrl+S"));
|
||||
file_menu->addAction("Save Project &As", this, SLOT(save_project_as()), QKeySequence("Ctrl+Shift+S"));
|
||||
file_menu->addAction(tr("&Save Project"), this, SLOT(save_project()), QKeySequence("Ctrl+S"))->setProperty("id", "saveproj");
|
||||
file_menu->addAction(tr("Save Project &As"), this, SLOT(save_project_as()), QKeySequence("Ctrl+Shift+S"))->setProperty("id", "saveprojas");
|
||||
|
||||
file_menu->addSeparator();
|
||||
|
||||
file_menu->addAction("&Import...", panel_project, SLOT(import_dialog()), QKeySequence("Ctrl+I"));
|
||||
file_menu->addAction(tr("&Import..."), panel_project, SLOT(import_dialog()), QKeySequence("Ctrl+I"))->setProperty("id", "import");
|
||||
|
||||
file_menu->addSeparator();
|
||||
|
||||
file_menu->addAction("&Export...", this, SLOT(export_dialog()), QKeySequence("Ctrl+M"));
|
||||
file_menu->addAction(tr("&Export..."), this, SLOT(export_dialog()), QKeySequence("Ctrl+M"))->setProperty("id", "export");
|
||||
|
||||
file_menu->addSeparator();
|
||||
|
||||
file_menu->addAction("E&xit", this, SLOT(close()));
|
||||
file_menu->addAction(tr("E&xit"), this, SLOT(close()))->setProperty("id", "exit");
|
||||
|
||||
// INITIALIZE EDIT MENU
|
||||
|
||||
QMenu* edit_menu = menuBar->addMenu("&Edit");
|
||||
QMenu* edit_menu = menuBar->addMenu(tr("&Edit"));
|
||||
connect(edit_menu, SIGNAL(aboutToShow()), this, SLOT(editMenu_About_To_Be_Shown()));
|
||||
|
||||
undo_action = edit_menu->addAction("&Undo", this, SLOT(undo()), QKeySequence("Ctrl+Z"));
|
||||
redo_action = edit_menu->addAction("Redo", this, SLOT(redo()), QKeySequence("Ctrl+Shift+Z"));
|
||||
undo_action = edit_menu->addAction(tr("&Undo"), this, SLOT(undo()), QKeySequence("Ctrl+Z"));
|
||||
undo_action->setProperty("id", "undo");
|
||||
redo_action = edit_menu->addAction(tr("Redo"), this, SLOT(redo()), QKeySequence("Ctrl+Shift+Z"));
|
||||
redo_action->setProperty("id", "redo");
|
||||
|
||||
edit_menu->addSeparator();
|
||||
|
||||
edit_menu->addAction("Cu&t", this, SLOT(cut()), QKeySequence("Ctrl+X"));
|
||||
edit_menu->addAction("Cop&y", this, SLOT(copy()), QKeySequence("Ctrl+C"));
|
||||
edit_menu->addAction("&Paste", this, SLOT(paste()), QKeySequence("Ctrl+V"));
|
||||
edit_menu->addAction("Paste Insert", this, SLOT(paste_insert()), QKeySequence("Ctrl+Shift+V"));
|
||||
edit_menu->addAction("Duplicate", this, SLOT(duplicate()), QKeySequence("Ctrl+D"));
|
||||
edit_menu->addAction("Delete", this, SLOT(delete_slot()), QKeySequence("Del"));
|
||||
edit_menu->addAction("Ripple Delete", this, SLOT(ripple_delete()), QKeySequence("Shift+Del"));
|
||||
edit_menu->addAction("Split", panel_timeline, SLOT(split_at_playhead()), QKeySequence("Ctrl+K"));
|
||||
edit_menu->addAction(tr("Cu&t"), this, SLOT(cut()), QKeySequence("Ctrl+X"))->setProperty("id", "cut");
|
||||
edit_menu->addAction(tr("Cop&y"), this, SLOT(copy()), QKeySequence("Ctrl+C"))->setProperty("id", "copy");
|
||||
edit_menu->addAction(tr("&Paste"), this, SLOT(paste()), QKeySequence("Ctrl+V"))->setProperty("id", "paste");
|
||||
edit_menu->addAction(tr("Paste Insert"), this, SLOT(paste_insert()), QKeySequence("Ctrl+Shift+V"))->setProperty("id", "pasteinsert");
|
||||
edit_menu->addAction(tr("Duplicate"), this, SLOT(duplicate()), QKeySequence("Ctrl+D"))->setProperty("id", "duplicate");
|
||||
edit_menu->addAction(tr("Delete"), this, SLOT(delete_slot()), QKeySequence("Del"))->setProperty("id", "delete");
|
||||
edit_menu->addAction(tr("Ripple Delete"), this, SLOT(ripple_delete()), QKeySequence("Shift+Del"))->setProperty("id", "rippledelete");
|
||||
edit_menu->addAction(tr("Split"), panel_timeline, SLOT(split_at_playhead()), QKeySequence("Ctrl+K"))->setProperty("id", "split");
|
||||
|
||||
edit_menu->addSeparator();
|
||||
|
||||
edit_menu->addAction("Select &All", this, SLOT(select_all()), QKeySequence("Ctrl+A"));
|
||||
edit_menu->addAction(tr("Select &All"), this, SLOT(select_all()), QKeySequence("Ctrl+A"))->setProperty("id", "selectall");
|
||||
|
||||
edit_menu->addAction("Deselect All", panel_timeline, SLOT(deselect()), QKeySequence("Ctrl+Shift+A"));
|
||||
edit_menu->addAction(tr("Deselect All"), panel_timeline, SLOT(deselect()), QKeySequence("Ctrl+Shift+A"))->setProperty("id", "deselectall");
|
||||
|
||||
edit_menu->addSeparator();
|
||||
|
||||
edit_menu->addAction("Add Default Transition", this, SLOT(add_default_transition()), QKeySequence("Ctrl+Shift+D"));
|
||||
edit_menu->addAction("Link/Unlink", panel_timeline, SLOT(toggle_links()), QKeySequence("Ctrl+L"));
|
||||
edit_menu->addAction("Enable/Disable", this, SLOT(toggle_enable_clips()), QKeySequence("Shift+E"));
|
||||
edit_menu->addAction("Nest", this, SLOT(nest()));
|
||||
edit_menu->addAction(tr("Add Default Transition"), this, SLOT(add_default_transition()), QKeySequence("Ctrl+Shift+D"))->setProperty("id", "deftransition");
|
||||
edit_menu->addAction(tr("Link/Unlink"), panel_timeline, SLOT(toggle_links()), QKeySequence("Ctrl+L"))->setProperty("id", "linkunlink");
|
||||
edit_menu->addAction(tr("Enable/Disable"), this, SLOT(toggle_enable_clips()), QKeySequence("Shift+E"))->setProperty("id", "enabledisable");
|
||||
edit_menu->addAction(tr("Nest"), this, SLOT(nest()))->setProperty("id", "nest");
|
||||
|
||||
edit_menu->addSeparator();
|
||||
|
||||
edit_menu->addAction("Ripple to In Point", this, SLOT(ripple_to_in_point()), QKeySequence("Q"));
|
||||
edit_menu->addAction("Ripple to Out Point", this, SLOT(ripple_to_out_point()), QKeySequence("W"));
|
||||
edit_menu->addAction("Edit to In Point", this, SLOT(edit_to_in_point()), QKeySequence("Ctrl+Alt+Q"));
|
||||
edit_menu->addAction("Edit to Out Point", this, SLOT(edit_to_out_point()), QKeySequence("Ctrl+Alt+W"));
|
||||
edit_menu->addAction(tr("Ripple to In Point"), this, SLOT(ripple_to_in_point()), QKeySequence("Q"))->setProperty("id", "rippletoin");
|
||||
edit_menu->addAction(tr("Ripple to Out Point"), this, SLOT(ripple_to_out_point()), QKeySequence("W"))->setProperty("id", "rippletoout");
|
||||
edit_menu->addAction(tr("Edit to In Point"), this, SLOT(edit_to_in_point()), QKeySequence("Ctrl+Alt+Q"))->setProperty("id", "edittoin");
|
||||
edit_menu->addAction(tr("Edit to Out Point"), this, SLOT(edit_to_out_point()), QKeySequence("Ctrl+Alt+W"))->setProperty("id", "edittoout");
|
||||
|
||||
edit_menu->addSeparator();
|
||||
|
||||
make_inout_menu(edit_menu);
|
||||
edit_menu->addAction("Delete In/Out Point", this, SLOT(delete_inout()), QKeySequence(";"));
|
||||
edit_menu->addAction("Ripple Delete In/Out Point", this, SLOT(ripple_delete_inout()), QKeySequence("'"));
|
||||
edit_menu->addAction(tr("Delete In/Out Point"), this, SLOT(delete_inout()), QKeySequence(";"))->setProperty("id", "deleteinout");
|
||||
edit_menu->addAction(tr("Ripple Delete In/Out Point"), this, SLOT(ripple_delete_inout()), QKeySequence("'"))->setProperty("id", "rippledeleteinout");
|
||||
|
||||
edit_menu->addSeparator();
|
||||
|
||||
edit_menu->addAction("Set/Edit Marker", this, SLOT(set_marker()), QKeySequence("M"));
|
||||
edit_menu->addAction(tr("Set/Edit Marker"), this, SLOT(set_marker()), QKeySequence("M"))->setProperty("id", "marker");
|
||||
|
||||
// INITIALIZE VIEW MENU
|
||||
|
||||
QMenu* view_menu = menuBar->addMenu("&View");
|
||||
QMenu* view_menu = menuBar->addMenu(tr("&View"));
|
||||
connect(view_menu, SIGNAL(aboutToShow()), this, SLOT(viewMenu_About_To_Be_Shown()));
|
||||
|
||||
view_menu->addAction("Zoom In", this, SLOT(zoom_in()), QKeySequence("="));
|
||||
view_menu->addAction("Zoom Out", this, SLOT(zoom_out()), QKeySequence("-"));
|
||||
view_menu->addAction("Increase Track Height", this, SLOT(zoom_in_tracks()), QKeySequence("Ctrl+="));
|
||||
view_menu->addAction("Decrease Track Height", this, SLOT(zoom_out_tracks()), QKeySequence("Ctrl+-"));
|
||||
view_menu->addAction(tr("Zoom In"), this, SLOT(zoom_in()), QKeySequence("="))->setProperty("id", "zoomin");
|
||||
view_menu->addAction(tr("Zoom Out"), this, SLOT(zoom_out()), QKeySequence("-"))->setProperty("id", "zoomout");
|
||||
view_menu->addAction(tr("Increase Track Height"), this, SLOT(zoom_in_tracks()), QKeySequence("Ctrl+="))->setProperty("id", "vzoomin");
|
||||
view_menu->addAction(tr("Decrease Track Height"), this, SLOT(zoom_out_tracks()), QKeySequence("Ctrl+-"))->setProperty("id", "vzoomout");
|
||||
|
||||
show_all = view_menu->addAction("Toggle Show All", panel_timeline, SLOT(toggle_show_all()), QKeySequence("\\"));
|
||||
show_all = view_menu->addAction(tr("Toggle Show All"), panel_timeline, SLOT(toggle_show_all()), QKeySequence("\\"));
|
||||
show_all->setProperty("id", "showall");
|
||||
show_all->setCheckable(true);
|
||||
|
||||
view_menu->addSeparator();
|
||||
|
||||
track_lines = view_menu->addAction("Track Lines", this, SLOT(toggle_bool_action()));
|
||||
track_lines = view_menu->addAction(tr("Track Lines"), this, SLOT(toggle_bool_action()));
|
||||
track_lines->setProperty("id", "tracklines");
|
||||
track_lines->setCheckable(true);
|
||||
track_lines->setData(reinterpret_cast<quintptr>(&config.show_track_lines));
|
||||
|
||||
rectified_waveforms = view_menu->addAction("Rectified Waveforms", this, SLOT(toggle_bool_action()));
|
||||
rectified_waveforms = view_menu->addAction(tr("Rectified Waveforms"), this, SLOT(toggle_bool_action()));
|
||||
rectified_waveforms->setProperty("id", "rectifiedwaveforms");
|
||||
rectified_waveforms->setCheckable(true);
|
||||
rectified_waveforms->setData(reinterpret_cast<quintptr>(&config.rectified_waveforms));
|
||||
|
||||
view_menu->addSeparator();
|
||||
|
||||
frames_action = view_menu->addAction("Frames", this, SLOT(set_timecode_view()));
|
||||
frames_action = view_menu->addAction(tr("Frames"), this, SLOT(set_timecode_view()));
|
||||
frames_action->setProperty("id", "modeframes");
|
||||
frames_action->setData(TIMECODE_FRAMES);
|
||||
frames_action->setCheckable(true);
|
||||
drop_frame_action = view_menu->addAction("Drop Frame", this, SLOT(set_timecode_view()));
|
||||
drop_frame_action = view_menu->addAction(tr("Drop Frame"), this, SLOT(set_timecode_view()));
|
||||
drop_frame_action->setProperty("id", "modedropframe");
|
||||
drop_frame_action->setData(TIMECODE_DROP);
|
||||
drop_frame_action->setCheckable(true);
|
||||
nondrop_frame_action = view_menu->addAction("Non-Drop Frame", this, SLOT(set_timecode_view()));
|
||||
nondrop_frame_action = view_menu->addAction(tr("Non-Drop Frame"), this, SLOT(set_timecode_view()));
|
||||
nondrop_frame_action->setProperty("id", "modenondropframe");
|
||||
nondrop_frame_action->setData(TIMECODE_NONDROP);
|
||||
nondrop_frame_action->setCheckable(true);
|
||||
milliseconds_action = view_menu->addAction("Milliseconds", this, SLOT(set_timecode_view()));
|
||||
milliseconds_action = view_menu->addAction(tr("Milliseconds"), this, SLOT(set_timecode_view()));
|
||||
milliseconds_action->setProperty("id", "milliseconds");
|
||||
milliseconds_action->setData(TIMECODE_MILLISECONDS);
|
||||
milliseconds_action->setCheckable(true);
|
||||
|
||||
view_menu->addSeparator();
|
||||
|
||||
QMenu* title_safe_area_menu = view_menu->addMenu("Title/Action Safe Area");
|
||||
QMenu* title_safe_area_menu = view_menu->addMenu(tr("Title/Action Safe Area"));
|
||||
|
||||
title_safe_off = title_safe_area_menu->addAction("Off");
|
||||
title_safe_off = title_safe_area_menu->addAction(tr("Off"));
|
||||
title_safe_off->setProperty("id", "titlesafeoff");
|
||||
title_safe_off->setCheckable(true);
|
||||
connect(title_safe_off, SIGNAL(triggered(bool)), this, SLOT(set_tsa_disable()));
|
||||
|
||||
title_safe_default = title_safe_area_menu->addAction("Default");
|
||||
title_safe_default = title_safe_area_menu->addAction(tr("Default"));
|
||||
title_safe_default->setProperty("id", "titlesafedefault");
|
||||
title_safe_default->setCheckable(true);
|
||||
connect(title_safe_default, SIGNAL(triggered(bool)), this, SLOT(set_tsa_default()));
|
||||
|
||||
title_safe_43 = title_safe_area_menu->addAction("4:3");
|
||||
title_safe_43 = title_safe_area_menu->addAction(tr("4:3"));
|
||||
title_safe_43->setProperty("id", "titlesafe43");
|
||||
title_safe_43->setCheckable(true);
|
||||
connect(title_safe_43, SIGNAL(triggered(bool)), this, SLOT(set_tsa_43()));
|
||||
|
||||
title_safe_169 = title_safe_area_menu->addAction("16:9");
|
||||
title_safe_169 = title_safe_area_menu->addAction(tr("16:9"));
|
||||
title_safe_169->setProperty("id", "titlesafe169");
|
||||
title_safe_169->setCheckable(true);
|
||||
connect(title_safe_169, SIGNAL(triggered(bool)), this, SLOT(set_tsa_169()));
|
||||
|
||||
title_safe_custom = title_safe_area_menu->addAction("Custom");
|
||||
title_safe_custom = title_safe_area_menu->addAction(tr("Custom"));
|
||||
title_safe_custom->setProperty("id", "titlesafecustom");
|
||||
title_safe_custom->setCheckable(true);
|
||||
connect(title_safe_custom, SIGNAL(triggered(bool)), this, SLOT(set_tsa_custom()));
|
||||
|
||||
view_menu->addSeparator();
|
||||
|
||||
full_screen = view_menu->addAction("Full Screen", this, SLOT(toggle_full_screen()), QKeySequence("F11"));
|
||||
full_screen = view_menu->addAction(tr("Full Screen"), this, SLOT(toggle_full_screen()), QKeySequence("F11"));
|
||||
full_screen->setProperty("id", "fullscreen");
|
||||
full_screen->setCheckable(true);
|
||||
|
||||
// INITIALIZE PLAYBACK MENU
|
||||
|
||||
QMenu* playback_menu = menuBar->addMenu("&Playback");
|
||||
QMenu* playback_menu = menuBar->addMenu(tr("&Playback"));
|
||||
|
||||
playback_menu->addAction("Go to Start", this, SLOT(go_to_start()), QKeySequence("Home"));
|
||||
playback_menu->addAction("Previous Frame", this, SLOT(prev_frame()), QKeySequence("Left"));
|
||||
playback_menu->addAction("Play/Pause", this, SLOT(playpause()), QKeySequence("Space"));
|
||||
playback_menu->addAction("Next Frame", this, SLOT(next_frame()), QKeySequence("Right"));
|
||||
playback_menu->addAction("Go to End", this, SLOT(go_to_end()), QKeySequence("End"));
|
||||
playback_menu->addAction(tr("Go to Start"), this, SLOT(go_to_start()), QKeySequence("Home"))->setProperty("id", "gotostart");
|
||||
playback_menu->addAction(tr("Previous Frame"), this, SLOT(prev_frame()), QKeySequence("Left"))->setProperty("id", "prevframe");
|
||||
playback_menu->addAction(tr("Play/Pause"), this, SLOT(playpause()), QKeySequence("Space"))->setProperty("id", "playpause");
|
||||
playback_menu->addAction(tr("Next Frame"), this, SLOT(next_frame()), QKeySequence("Right"))->setProperty("id", "nextframe");
|
||||
playback_menu->addAction(tr("Go to End"), this, SLOT(go_to_end()), QKeySequence("End"))->setProperty("id", "gotoend");
|
||||
playback_menu->addSeparator();
|
||||
playback_menu->addAction("Go to Previous Cut", this, SLOT(prev_cut()), QKeySequence("Up"));
|
||||
playback_menu->addAction("Go to Next Cut", this, SLOT(next_cut()), QKeySequence("Down"));
|
||||
playback_menu->addAction(tr("Go to Previous Cut"), this, SLOT(prev_cut()), QKeySequence("Up"))->setProperty("id", "prevcut");
|
||||
playback_menu->addAction(tr("Go to Next Cut"), this, SLOT(next_cut()), QKeySequence("Down"))->setProperty("id", "nextcut");
|
||||
playback_menu->addSeparator();
|
||||
playback_menu->addAction("Go to In Point", this, SLOT(go_to_in()), QKeySequence("Shift+I"));
|
||||
playback_menu->addAction("Go to Out Point", this, SLOT(go_to_out()), QKeySequence("Shift+O"));
|
||||
playback_menu->addAction(tr("Go to In Point"), this, SLOT(go_to_in()), QKeySequence("Shift+I"))->setProperty("id", "gotoin");
|
||||
playback_menu->addAction(tr("Go to Out Point"), this, SLOT(go_to_out()), QKeySequence("Shift+O"))->setProperty("id", "gotoout");
|
||||
|
||||
// INITIALIZE WINDOW MENU
|
||||
|
||||
window_menu = menuBar->addMenu("&Window");
|
||||
window_menu = menuBar->addMenu(tr("&Window"));
|
||||
connect(window_menu, SIGNAL(aboutToShow()), this, SLOT(windowMenu_About_To_Be_Shown()));
|
||||
|
||||
QAction* window_project_action = window_menu->addAction("Project", this, SLOT(toggle_panel_visibility()));
|
||||
QAction* window_project_action = window_menu->addAction(tr("Project"), this, SLOT(toggle_panel_visibility()));
|
||||
window_project_action->setProperty("id", "panelproject");
|
||||
window_project_action->setCheckable(true);
|
||||
window_project_action->setData(reinterpret_cast<quintptr>(panel_project));
|
||||
|
||||
QAction* window_effectcontrols_action = window_menu->addAction("Effect Controls", this, SLOT(toggle_panel_visibility()));
|
||||
QAction* window_effectcontrols_action = window_menu->addAction(tr("Effect Controls"), this, SLOT(toggle_panel_visibility()));
|
||||
window_effectcontrols_action->setProperty("id", "paneleffectcontrols");
|
||||
window_effectcontrols_action->setCheckable(true);
|
||||
window_effectcontrols_action->setData(reinterpret_cast<quintptr>(panel_effect_controls));
|
||||
|
||||
QAction* window_timeline_action = window_menu->addAction("Timeline", this, SLOT(toggle_panel_visibility()));
|
||||
QAction* window_timeline_action = window_menu->addAction(tr("Timeline"), this, SLOT(toggle_panel_visibility()));
|
||||
window_timeline_action->setProperty("id", "paneltimeline");
|
||||
window_timeline_action->setCheckable(true);
|
||||
window_timeline_action->setData(reinterpret_cast<quintptr>(panel_timeline));
|
||||
|
||||
QAction* window_graph_editor_action = window_menu->addAction("Graph Editor", this, SLOT(toggle_panel_visibility()));
|
||||
QAction* window_graph_editor_action = window_menu->addAction(tr("Graph Editor"), this, SLOT(toggle_panel_visibility()));
|
||||
window_graph_editor_action->setProperty("id", "panelgrapheditor");
|
||||
window_graph_editor_action->setCheckable(true);
|
||||
window_graph_editor_action->setData(reinterpret_cast<quintptr>(panel_graph_editor));
|
||||
|
||||
QAction* window_footageviewer_action = window_menu->addAction("Footage Viewer", this, SLOT(toggle_panel_visibility()));
|
||||
QAction* window_footageviewer_action = window_menu->addAction(tr("Footage Viewer"), this, SLOT(toggle_panel_visibility()));
|
||||
window_footageviewer_action->setProperty("id", "panelfootageviewer");
|
||||
window_footageviewer_action->setCheckable(true);
|
||||
window_footageviewer_action->setData(reinterpret_cast<quintptr>(panel_footage_viewer));
|
||||
|
||||
QAction* window_sequenceviewer_action = window_menu->addAction("Sequence Viewer", this, SLOT(toggle_panel_visibility()));
|
||||
QAction* window_sequenceviewer_action = window_menu->addAction(tr("Sequence Viewer"), this, SLOT(toggle_panel_visibility()));
|
||||
window_sequenceviewer_action->setProperty("id", "panelsequenceviewer");
|
||||
window_sequenceviewer_action->setCheckable(true);
|
||||
window_sequenceviewer_action->setData(reinterpret_cast<quintptr>(panel_sequence_viewer));
|
||||
|
||||
window_menu->addSeparator();
|
||||
|
||||
window_menu->addAction("Reset to Default Layout", this, SLOT(reset_layout()));
|
||||
window_menu->addAction(tr("Reset to Default Layout"), this, SLOT(reset_layout()))->setProperty("id", "resetdefaultlayout");
|
||||
|
||||
// INITIALIZE TOOLS MENU
|
||||
|
||||
QMenu* tools_menu = menuBar->addMenu("&Tools");
|
||||
QMenu* tools_menu = menuBar->addMenu(tr("&Tools"));
|
||||
connect(tools_menu, SIGNAL(aboutToShow()), this, SLOT(toolMenu_About_To_Be_Shown()));
|
||||
|
||||
pointer_tool_action = tools_menu->addAction("Pointer Tool", this, SLOT(menu_click_button()), QKeySequence("V"));
|
||||
pointer_tool_action = tools_menu->addAction(tr("Pointer Tool"), this, SLOT(menu_click_button()), QKeySequence("V"));
|
||||
pointer_tool_action->setProperty("id", "pointertool");
|
||||
pointer_tool_action->setCheckable(true);
|
||||
pointer_tool_action->setData(reinterpret_cast<quintptr>(panel_timeline->toolArrowButton));
|
||||
|
||||
edit_tool_action = tools_menu->addAction("Edit Tool", this, SLOT(menu_click_button()), QKeySequence("X"));
|
||||
edit_tool_action = tools_menu->addAction(tr("Edit Tool"), this, SLOT(menu_click_button()), QKeySequence("X"));
|
||||
edit_tool_action->setProperty("id", "edittool");
|
||||
edit_tool_action->setCheckable(true);
|
||||
edit_tool_action->setData(reinterpret_cast<quintptr>(panel_timeline->toolEditButton));
|
||||
|
||||
ripple_tool_action = tools_menu->addAction("Ripple Tool", this, SLOT(menu_click_button()), QKeySequence("B"));
|
||||
ripple_tool_action = tools_menu->addAction(tr("Ripple Tool"), this, SLOT(menu_click_button()), QKeySequence("B"));
|
||||
ripple_tool_action->setProperty("id", "rippletool");
|
||||
ripple_tool_action->setCheckable(true);
|
||||
ripple_tool_action->setData(reinterpret_cast<quintptr>(panel_timeline->toolRippleButton));
|
||||
|
||||
razor_tool_action = tools_menu->addAction("Razor Tool", this, SLOT(menu_click_button()), QKeySequence("C"));
|
||||
razor_tool_action = tools_menu->addAction(tr("Razor Tool"), this, SLOT(menu_click_button()), QKeySequence("C"));
|
||||
razor_tool_action->setProperty("id", "razortool");
|
||||
razor_tool_action->setCheckable(true);
|
||||
razor_tool_action->setData(reinterpret_cast<quintptr>(panel_timeline->toolRazorButton));
|
||||
|
||||
slip_tool_action = tools_menu->addAction("Slip Tool", this, SLOT(menu_click_button()), QKeySequence("Y"));
|
||||
slip_tool_action = tools_menu->addAction(tr("Slip Tool"), this, SLOT(menu_click_button()), QKeySequence("Y"));
|
||||
slip_tool_action->setProperty("id", "sliptool");
|
||||
slip_tool_action->setCheckable(true);
|
||||
slip_tool_action->setData(reinterpret_cast<quintptr>(panel_timeline->toolSlipButton));
|
||||
|
||||
slide_tool_action = tools_menu->addAction("Slide Tool", this, SLOT(menu_click_button()), QKeySequence("U"));
|
||||
slide_tool_action = tools_menu->addAction(tr("Slide Tool"), this, SLOT(menu_click_button()), QKeySequence("U"));
|
||||
slide_tool_action->setProperty("id", "slidetool");
|
||||
slide_tool_action->setCheckable(true);
|
||||
slide_tool_action->setData(reinterpret_cast<quintptr>(panel_timeline->toolSlideButton));
|
||||
|
||||
hand_tool_action = tools_menu->addAction("Hand Tool", this, SLOT(menu_click_button()), QKeySequence("H"));
|
||||
hand_tool_action = tools_menu->addAction(tr("Hand Tool"), this, SLOT(menu_click_button()), QKeySequence("H"));
|
||||
hand_tool_action->setProperty("id", "handtool");
|
||||
hand_tool_action->setCheckable(true);
|
||||
hand_tool_action->setData(reinterpret_cast<quintptr>(panel_timeline->toolHandButton));
|
||||
|
||||
transition_tool_action = tools_menu->addAction("Transition Tool", this, SLOT(menu_click_button()), QKeySequence("T"));
|
||||
transition_tool_action = tools_menu->addAction(tr("Transition Tool"), this, SLOT(menu_click_button()), QKeySequence("T"));
|
||||
transition_tool_action->setProperty("id", "transitiontool");
|
||||
transition_tool_action->setCheckable(true);
|
||||
transition_tool_action->setData(reinterpret_cast<quintptr>(panel_timeline->toolTransitionButton));
|
||||
|
||||
tools_menu->addSeparator();
|
||||
|
||||
snap_toggle = tools_menu->addAction("Enable Snapping", this, SLOT(menu_click_button()), QKeySequence("S"));
|
||||
snap_toggle = tools_menu->addAction(tr("Enable Snapping"), this, SLOT(menu_click_button()), QKeySequence("S"));
|
||||
snap_toggle->setProperty("id", "snapping");
|
||||
snap_toggle->setCheckable(true);
|
||||
snap_toggle->setData(reinterpret_cast<quintptr>(panel_timeline->snappingButton));
|
||||
|
||||
tools_menu->addSeparator();
|
||||
|
||||
selecting_also_seeks = tools_menu->addAction("Selecting Also Seeks", this, SLOT(toggle_bool_action()));
|
||||
selecting_also_seeks = tools_menu->addAction(tr("Selecting Also Seeks"), this, SLOT(toggle_bool_action()));
|
||||
selecting_also_seeks->setProperty("id", "selectingalsoseeks");
|
||||
selecting_also_seeks->setCheckable(true);
|
||||
selecting_also_seeks->setData(reinterpret_cast<quintptr>(&config.select_also_seeks));
|
||||
|
||||
edit_tool_also_seeks = tools_menu->addAction("Edit Tool Also Seeks", this, SLOT(toggle_bool_action()));
|
||||
edit_tool_also_seeks = tools_menu->addAction(tr("Edit Tool Also Seeks"), this, SLOT(toggle_bool_action()));
|
||||
edit_tool_also_seeks->setProperty("id", "editalsoseeks");
|
||||
edit_tool_also_seeks->setCheckable(true);
|
||||
edit_tool_also_seeks->setData(reinterpret_cast<quintptr>(&config.edit_tool_also_seeks));
|
||||
|
||||
edit_tool_selects_links = tools_menu->addAction("Edit Tool Selects Links", this, SLOT(toggle_bool_action()));
|
||||
edit_tool_selects_links = tools_menu->addAction(tr("Edit Tool Selects Links"), this, SLOT(toggle_bool_action()));
|
||||
edit_tool_selects_links->setProperty("id", "editselectslinks");
|
||||
edit_tool_selects_links->setCheckable(true);
|
||||
edit_tool_selects_links->setData(reinterpret_cast<quintptr>(&config.edit_tool_selects_links));
|
||||
|
||||
seek_also_selects = tools_menu->addAction("Seek Also Selects", this, SLOT(toggle_bool_action()));
|
||||
seek_also_selects = tools_menu->addAction(tr("Seek Also Selects"), this, SLOT(toggle_bool_action()));
|
||||
seek_also_selects->setProperty("id", "seekalsoselects");
|
||||
seek_also_selects->setCheckable(true);
|
||||
seek_also_selects->setData(reinterpret_cast<quintptr>(&config.seek_also_selects));
|
||||
|
||||
seek_to_end_of_pastes = tools_menu->addAction("Seek to the End of Pastes", this, SLOT(toggle_bool_action()));
|
||||
seek_to_end_of_pastes = tools_menu->addAction(tr("Seek to the End of Pastes"), this, SLOT(toggle_bool_action()));
|
||||
seek_to_end_of_pastes->setProperty("id", "seektoendofpastes");
|
||||
seek_to_end_of_pastes->setCheckable(true);
|
||||
seek_to_end_of_pastes->setData(reinterpret_cast<quintptr>(&config.paste_seeks));
|
||||
|
||||
scroll_wheel_zooms = tools_menu->addAction("Scroll Wheel Zooms", this, SLOT(toggle_bool_action()));
|
||||
scroll_wheel_zooms = tools_menu->addAction(tr("Scroll Wheel Zooms"), this, SLOT(toggle_bool_action()));
|
||||
scroll_wheel_zooms->setProperty("id", "scrollwheelzooms");
|
||||
scroll_wheel_zooms->setCheckable(true);
|
||||
scroll_wheel_zooms->setData(reinterpret_cast<quintptr>(&config.scroll_zooms));
|
||||
|
||||
enable_drag_files_to_timeline = tools_menu->addAction("Enable Drag Files to Timeline", this, SLOT(toggle_bool_action()));
|
||||
enable_drag_files_to_timeline = tools_menu->addAction(tr("Enable Drag Files to Timeline"), this, SLOT(toggle_bool_action()));
|
||||
enable_drag_files_to_timeline->setProperty("id", "enabledragfilestotimeline");
|
||||
enable_drag_files_to_timeline->setCheckable(true);
|
||||
enable_drag_files_to_timeline->setData(reinterpret_cast<quintptr>(&config.enable_drag_files_to_timeline));
|
||||
|
||||
autoscale_by_default = tools_menu->addAction("Auto-Scale By Default", this, SLOT(toggle_bool_action()));
|
||||
autoscale_by_default = tools_menu->addAction(tr("Auto-Scale By Default"), this, SLOT(toggle_bool_action()));
|
||||
autoscale_by_default->setProperty("id", "autoscalebydefault");
|
||||
autoscale_by_default->setCheckable(true);
|
||||
autoscale_by_default->setData(reinterpret_cast<quintptr>(&config.autoscale_by_default));
|
||||
|
||||
enable_seek_to_import = tools_menu->addAction("Enable Seek to Import", this, SLOT(toggle_bool_action()));
|
||||
enable_seek_to_import = tools_menu->addAction(tr("Enable Seek to Import"), this, SLOT(toggle_bool_action()));
|
||||
enable_seek_to_import->setProperty("id", "enableseektoimport");
|
||||
enable_seek_to_import->setCheckable(true);
|
||||
enable_seek_to_import->setData(reinterpret_cast<quintptr>(&config.enable_seek_to_import));
|
||||
|
||||
enable_audio_scrubbing = tools_menu->addAction("Audio Scrubbing", this, SLOT(toggle_bool_action()));
|
||||
enable_audio_scrubbing = tools_menu->addAction(tr("Audio Scrubbing"), this, SLOT(toggle_bool_action()));
|
||||
enable_audio_scrubbing->setProperty("id", "audioscrubbing");
|
||||
enable_audio_scrubbing->setCheckable(true);
|
||||
enable_audio_scrubbing->setData(reinterpret_cast<quintptr>(&config.enable_audio_scrubbing));
|
||||
|
||||
enable_drop_on_media_to_replace = tools_menu->addAction("Enable Drop on Media to Replace", this, SLOT(toggle_bool_action()));
|
||||
enable_drop_on_media_to_replace = tools_menu->addAction(tr("Enable Drop on Media to Replace"), this, SLOT(toggle_bool_action()));
|
||||
enable_drop_on_media_to_replace->setProperty("id", "enabledropmediareplace");
|
||||
enable_drop_on_media_to_replace->setCheckable(true);
|
||||
enable_drop_on_media_to_replace->setData(reinterpret_cast<quintptr>(&config.drop_on_media_to_replace));
|
||||
|
||||
enable_hover_focus = tools_menu->addAction("Enable Hover Focus", this, SLOT(toggle_bool_action()));
|
||||
enable_hover_focus = tools_menu->addAction(tr("Enable Hover Focus"), this, SLOT(toggle_bool_action()));
|
||||
enable_hover_focus->setProperty("id", "hoverfocus");
|
||||
enable_hover_focus->setCheckable(true);
|
||||
enable_hover_focus->setData(reinterpret_cast<quintptr>(&config.hover_focus));
|
||||
|
||||
set_name_and_marker = tools_menu->addAction("Ask For Name When Setting Marker", this, SLOT(toggle_bool_action()));
|
||||
set_name_and_marker = tools_menu->addAction(tr("Ask For Name When Setting Marker"), this, SLOT(toggle_bool_action()));
|
||||
set_name_and_marker->setProperty("id", "asknamemarkerset");
|
||||
set_name_and_marker->setCheckable(true);
|
||||
set_name_and_marker->setData(reinterpret_cast<quintptr>(&config.set_name_with_marker));
|
||||
|
||||
loop_action = tools_menu->addAction("Loop", this, SLOT(toggle_bool_action()));
|
||||
loop_action = tools_menu->addAction(tr("Loop"), this, SLOT(toggle_bool_action()));
|
||||
loop_action->setProperty("id", "loop");
|
||||
loop_action->setCheckable(true);
|
||||
loop_action->setData(reinterpret_cast<quintptr>(&config.loop));
|
||||
|
||||
pause_at_out_point_action = tools_menu->addAction("Pause At Out Point", this, SLOT(toggle_bool_action()));
|
||||
pause_at_out_point_action = tools_menu->addAction(tr("Pause At Out Point"), this, SLOT(toggle_bool_action()));
|
||||
pause_at_out_point_action->setProperty("id", "pauseoutpoint");
|
||||
pause_at_out_point_action->setCheckable(true);
|
||||
pause_at_out_point_action->setData(reinterpret_cast<quintptr>(&config.pause_at_out_point));
|
||||
|
||||
tools_menu->addSeparator();
|
||||
|
||||
no_autoscroll = tools_menu->addAction("No Auto-Scroll", this, SLOT(set_autoscroll()));
|
||||
no_autoscroll = tools_menu->addAction(tr("No Auto-Scroll"), this, SLOT(set_autoscroll()));
|
||||
no_autoscroll->setProperty("id", "autoscrollno");
|
||||
no_autoscroll->setData(AUTOSCROLL_NO_SCROLL);
|
||||
no_autoscroll->setCheckable(true);
|
||||
|
||||
page_autoscroll = tools_menu->addAction("Page Auto-Scroll", this, SLOT(set_autoscroll()));
|
||||
page_autoscroll = tools_menu->addAction(tr("Page Auto-Scroll"), this, SLOT(set_autoscroll()));
|
||||
page_autoscroll->setProperty("id", "autoscrollpage");
|
||||
page_autoscroll->setData(AUTOSCROLL_PAGE_SCROLL);
|
||||
page_autoscroll->setCheckable(true);
|
||||
|
||||
smooth_autoscroll = tools_menu->addAction("Smooth Auto-Scroll", this, SLOT(set_autoscroll()));
|
||||
smooth_autoscroll = tools_menu->addAction(tr("Smooth Auto-Scroll"), this, SLOT(set_autoscroll()));
|
||||
smooth_autoscroll->setProperty("id", "autoscrollsmooth");
|
||||
smooth_autoscroll->setData(AUTOSCROLL_SMOOTH_SCROLL);
|
||||
smooth_autoscroll->setCheckable(true);
|
||||
|
||||
tools_menu->addSeparator();
|
||||
|
||||
tools_menu->addAction("Preferences", this, SLOT(preferences()), QKeySequence("Ctrl+."));
|
||||
tools_menu->addAction(tr("Preferences"), this, SLOT(preferences()), QKeySequence("Ctrl+."))->setProperty("id", "prefs");
|
||||
|
||||
#ifdef QT_DEBUG
|
||||
tools_menu->addAction("Clear Undo", this, SLOT(clear_undo_stack()));
|
||||
tools_menu->addAction(tr("Clear Undo"), this, SLOT(clear_undo_stack()))->setProperty("id", "clearundo");
|
||||
#endif
|
||||
|
||||
// INITIALIZE HELP MENU
|
||||
|
||||
QMenu* help_menu = menuBar->addMenu("&Help");
|
||||
QMenu* help_menu = menuBar->addMenu(tr("&Help"));
|
||||
|
||||
help_menu->addAction("A&ction Search", this, SLOT(show_action_search()), QKeySequence("/"));
|
||||
help_menu->addAction(tr("A&ction Search"), this, SLOT(show_action_search()), QKeySequence("/"))->setProperty("id", "actionsearch");
|
||||
|
||||
help_menu->addSeparator();
|
||||
|
||||
help_menu->addAction("Debug Log", this, SLOT(show_debug_log()));
|
||||
help_menu->addAction(tr("Debug Log"), this, SLOT(show_debug_log()))->setProperty("id", "debuglog");
|
||||
|
||||
help_menu->addSeparator();
|
||||
|
||||
help_menu->addAction("&About...", this, SLOT(show_about()));
|
||||
help_menu->addAction(tr("&About..."), this, SLOT(show_about()))->setProperty("id", "about");
|
||||
|
||||
load_shortcuts(get_config_path() + "/shortcuts", true);
|
||||
}
|
||||
@@ -911,7 +962,7 @@ void MainWindow::set_button_action_checked(QAction *a) {
|
||||
|
||||
void MainWindow::updateTitle(const QString& url) {
|
||||
project_url = url;
|
||||
setWindowTitle(appName + " - " + ((project_url.isEmpty()) ? "<untitled>" : project_url) + "[*]");
|
||||
setWindowTitle(appName + " - " + ((project_url.isEmpty()) ? tr("<untitled>") : project_url) + "[*]");
|
||||
}
|
||||
|
||||
void MainWindow::closeEvent(QCloseEvent *e) {
|
||||
@@ -973,7 +1024,7 @@ void MainWindow::clear_undo_stack() {
|
||||
}
|
||||
|
||||
void MainWindow::open_project() {
|
||||
QString fn = QFileDialog::getOpenFileName(this, "Open Project...", "", OLIVE_FILE_FILTER);
|
||||
QString fn = QFileDialog::getOpenFileName(this, tr("Open Project..."), "", OLIVE_FILE_FILTER);
|
||||
if (!fn.isEmpty() && can_close_project()) {
|
||||
open_project_worker(fn, false);
|
||||
}
|
||||
@@ -1122,8 +1173,8 @@ void MainWindow::viewMenu_About_To_Be_Shown() {
|
||||
|
||||
title_safe_off->setChecked(!config.show_title_safe_area);
|
||||
title_safe_default->setChecked(config.show_title_safe_area && !config.use_custom_title_safe_ratio);
|
||||
title_safe_43->setChecked(config.show_title_safe_area && config.use_custom_title_safe_ratio && config.custom_title_safe_ratio == 4.0/3.0);
|
||||
title_safe_169->setChecked(config.show_title_safe_area && config.use_custom_title_safe_ratio && config.custom_title_safe_ratio == 16.0/9.0);
|
||||
title_safe_43->setChecked(config.show_title_safe_area && config.use_custom_title_safe_ratio && qFuzzyCompare(config.custom_title_safe_ratio, 4.0/3.0));
|
||||
title_safe_169->setChecked(config.show_title_safe_area && config.use_custom_title_safe_ratio && qFuzzyCompare(config.custom_title_safe_ratio, 16.0/9.0));
|
||||
title_safe_custom->setChecked(config.show_title_safe_area && config.use_custom_title_safe_ratio && !title_safe_43->isChecked() && !title_safe_169->isChecked());
|
||||
|
||||
full_screen->setChecked(windowState() == Qt::WindowFullScreen);
|
||||
@@ -1175,7 +1226,7 @@ void MainWindow::add_default_transition() {
|
||||
}
|
||||
|
||||
void MainWindow::new_folder() {
|
||||
Media* m = panel_project->new_folder(0);
|
||||
Media* m = panel_project->new_folder(nullptr);
|
||||
undo_stack.push(new AddMediaCommand(m, panel_project->get_selected_folder()));
|
||||
|
||||
QModelIndex index = project_model.create_index(m->row(), 0, m);
|
||||
@@ -1208,14 +1259,17 @@ void MainWindow::fileMenu_About_To_Be_Shown() {
|
||||
}
|
||||
|
||||
void MainWindow::fileMenu_About_To_Hide() {
|
||||
// open_recent->clear();
|
||||
}
|
||||
|
||||
void MainWindow::load_recent_project() {
|
||||
int index = static_cast<QAction*>(sender())->data().toInt();
|
||||
QString recent_url = recent_projects.at(index);
|
||||
if (!QFile::exists(recent_url)) {
|
||||
if (QMessageBox::question(this, "Missing recent project", "The project '" + recent_url + "' no longer exists. Would you like to remove it from the recent projects list?", QMessageBox::Yes, QMessageBox::No) == QMessageBox::Yes) {
|
||||
if (QMessageBox::question(
|
||||
this,
|
||||
tr("Missing recent project"),
|
||||
tr("The project '%1' no longer exists. Would you like to remove it from the recent projects list?").arg(recent_url),
|
||||
QMessageBox::Yes, QMessageBox::No) == QMessageBox::Yes) {
|
||||
recent_projects.removeAt(index);
|
||||
panel_project->save_recent_projects();
|
||||
}
|
||||
@@ -1334,10 +1388,10 @@ void MainWindow::set_tsa_custom() {
|
||||
|
||||
do {
|
||||
if (invalid) {
|
||||
QMessageBox::critical(this, "Invalid aspect ratio", "The aspect ratio '" + input + "' is invalid. Please try again.");
|
||||
QMessageBox::critical(this, tr("Invalid aspect ratio"), tr("The aspect ratio '%1' is invalid. Please try again.").arg(input));
|
||||
}
|
||||
|
||||
input = QInputDialog::getText(this, "Enter custom aspect ratio", "Enter the aspect ratio to use for the title/action safe area (e.g. 16:9):");
|
||||
input = QInputDialog::getText(this, tr("Enter custom aspect ratio"), tr("Enter the aspect ratio to use for the title/action safe area (e.g. 16:9):"));
|
||||
invalid = !arTest.exactMatch(input) && !input.isEmpty();
|
||||
} while (invalid);
|
||||
|
||||
@@ -1404,7 +1458,7 @@ void MainWindow::nest() {
|
||||
Sequence* s = new Sequence();
|
||||
|
||||
// create "nest" sequence
|
||||
s->name = panel_project->get_next_sequence_name("Nested Sequence");
|
||||
s->name = panel_project->get_next_sequence_name(tr("Nested Sequence"));
|
||||
s->width = sequence->width;
|
||||
s->height = sequence->height;
|
||||
s->frame_rate = sequence->frame_rate;
|
||||
|
||||
Reference in New Issue
Block a user